ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
73a4568f19
openwrt/package/kernel/mac80211/Makefile
Matthias Schiffer 4bd3b8f8b0 mac80211, hostapd: always explicitly set beacon interval 
One of the latest mac80211 updates added sanity checks, requiring the
beacon intervals of all VIFs of the same radio to match. This often broke
AP+11s setups, as these modes use different default intervals, at least in
some configurations (observed on ath9k).

Instead of relying on driver or hostapd defaults, change the scripts to
always explicitly set the beacon interval, defaulting to 100. This also
applies the beacon interval to 11s interfaces, which had been forgotten
before. VIF-specific beacon_int setting is removed from hostapd.sh.

Fixes FS#619.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2017-05-27 14:24:13 +02:00

1848 lines
59 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2007-2015 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=mac80211
PKG_VERSION:=2017-01-31
PKG_RELEASE:=2
PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
PKG_BACKPORT_VERSION:=
PKG_HASH:=75e6d39e34cf156212a2509172a4a62b673b69eb4a1d9aaa565f7fa719fa2317
PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.xz
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
PKG_BUILD_PARALLEL:=1
PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
PKG_DRIVERS = \
adm8211 \
airo \
ath ath5k ath9k ath9k-common ath9k-htc ath10k \
b43 b43legacy \
carl9170 \
hermes hermes-pci hermes-pcmcia hermes-plx\
iwl-legacy iwl3945 iwl4965 iwlwifi \
lib80211 \
libipw ipw2100 ipw2200 \
libertas-sdio libertas-usb libertas-spi \
mac80211-hwsim \
mt7601u \
mwl8k mwifiex-pcie mwifiex-sdio \
p54-common p54-pci p54-spi p54-usb \
rt2x00-lib rt2x00-pci rt2x00-usb \
rt2400-pci rt2500-pci rt2500-usb \
rt2800-lib rt2800-mmio rt2800-pci rt2800-soc rt2800-usb \
rt61-pci rt73-usb \
rtl8180 rtl8187 \
rtlwifi rtlwifi-pci rtlwifi-usb rtl8192c-common rtl8192ce rtl8192se \
rtl8192de rtl8192cu \
rtl8xxxu \
wlcore wl12xx wl18xx \
zd1211rw
PKG_CONFIG_DEPENDS:= \
CONFIG_PACKAGE_kmod-mac80211 \
$(patsubst %,CONFIG_PACKAGE_kmod-%,$(PKG_DRIVERS)) \
CONFIG_PACKAGE_MAC80211_DEBUGFS \
CONFIG_PACKAGE_MAC80211_MESH \
CONFIG_PACKAGE_MAC80211_TRACING \
CONFIG_PACKAGE_ATH_DEBUG \
CONFIG_PACKAGE_ATH_DFS \
CONFIG_PACKAGE_B43_DEBUG \
CONFIG_PACKAGE_B43_PIO \
CONFIG_PACKAGE_B43_PHY_G \
CONFIG_PACKAGE_B43_PHY_N \
CONFIG_PACKAGE_B43_PHY_LP \
CONFIG_PACKAGE_B43_PHY_HT \
CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB \
CONFIG_PACKAGE_B43_BUSES_BCMA \
CONFIG_PACKAGE_B43_BUSES_SSB \
CONFIG_PACKAGE_BRCM80211_DEBUG \
CONFIG_PACKAGE_IWLWIFI_DEBUG \
CONFIG_PACKAGE_IWLWIFI_DEBUGFS \
CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS \
CONFIG_PACKAGE_RT2X00_DEBUG \
CONFIG_PACKAGE_RTLWIFI_DEBUG \
CONFIG_ATH9K_SUPPORT_PCOEM \
CONFIG_ATH9K_TX99 \
CONFIG_ATH_USER_REGD \
include $(INCLUDE_DIR)/package.mk
WMENU:=Wireless Drivers
define KernelPackage/mac80211/Default
SUBMENU:=$(WMENU)
URL:=https://wireless.wiki.kernel.org/
MAINTAINER:=Felix Fietkau <nbd@nbd.name>
endef
define KernelPackage/cfg80211
$(call KernelPackage/mac80211/Default)
TITLE:=cfg80211 - wireless configuration API
DEPENDS+= +iw
FILES:= \
$(PKG_BUILD_DIR)/compat/compat.ko \
$(PKG_BUILD_DIR)/net/wireless/cfg80211.ko
endef
define KernelPackage/cfg80211/description
cfg80211 is the Linux wireless LAN (802.11) configuration API.
endef
define KernelPackage/mac80211
$(call KernelPackage/mac80211/Default)
TITLE:=Linux 802.11 Wireless Networking Stack
DEPENDS+= +kmod-cfg80211 +hostapd-common
KCONFIG:=\
CONFIG_AVERAGE=y
FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko
MENU:=1
endef
define KernelPackage/mac80211/config
if PACKAGE_kmod-mac80211
config PACKAGE_MAC80211_DEBUGFS
bool "Export mac80211 internals in DebugFS"
select KERNEL_DEBUG_FS
default y
help
Select this to see extensive information about
the internal state of mac80211 in debugfs.
config PACKAGE_MAC80211_TRACING
bool "Enable tracing (mac80211 and supported drivers)"
select KERNEL_FTRACE
select KERNEL_ENABLE_DEFAULT_TRACERS
default n
help
Select this to enable tracing of mac80211 and
related wifi drivers (using trace-cmd).
config PACKAGE_MAC80211_MESH
bool "Enable 802.11s mesh support"
default y
endif
endef
define KernelPackage/mac80211/description
Generic IEEE 802.11 Networking Stack (mac80211)
endef
define KernelPackage/adm8211
$(call KernelPackage/mac80211/Default)
TITLE:=ADMTek 8211 support
DEPENDS+=@PCI_SUPPORT +kmod-mac80211 +kmod-eeprom-93cx6
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/admtek/adm8211.ko
AUTOLOAD:=$(call AutoProbe,adm8211)
endef
define KernelPackage/airo
$(call KernelPackage/mac80211/Default)
TITLE:=Cisco Aironet driver
DEPENDS+=@PCI_SUPPORT +@DRIVER_WEXT_SUPPORT +kmod-cfg80211 @TARGET_x86
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/cisco/airo.ko
AUTOLOAD:=$(call AutoProbe,airo)
endef
define KernelPackage/airo/description
Kernel support for Cisco Aironet cards
endef
define KernelPackage/ath/config
if PACKAGE_kmod-ath
config ATH_USER_REGD
bool "Force Atheros drivers to respect the user's regdomain settings"
default y
help
Atheros' idea of regulatory handling is that the EEPROM of the card defines
the regulatory limits and the user is only allowed to restrict the settings
even further, even if the country allows frequencies or power levels that
are forbidden by the EEPROM settings.
Select this option if you want the driver to respect the user's decision about
regulatory settings.
config PACKAGE_ATH_DEBUG
bool "Atheros wireless debugging"
help
Say Y, if you want to debug atheros wireless drivers.
Only ath9k & ath10k make use of this.
config PACKAGE_ATH_DFS
bool "Enable DFS support"
default y
help
Dynamic frequency selection (DFS) is required for most of the 5 GHz band
channels in Europe, US, and Japan.
Select this option if you want to use such channels.
endif
endef
define KernelPackage/ath
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros common driver part
DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx||TARGET_ath25 +kmod-mac80211
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko
MENU:=1
endef
define KernelPackage/ath/description
This module contains some common parts needed by Atheros Wireless drivers.
endef
define KernelPackage/ath5k
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 5xxx wireless cards support
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath5k
DEPENDS+= @PCI_SUPPORT||@TARGET_ath25 +kmod-ath +@DRIVER_11W_SUPPORT
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko
AUTOLOAD:=$(call AutoProbe,ath5k)
endef
define KernelPackage/ath5k/description
This module adds support for wireless adapters based on
Atheros 5xxx chipset.
endef
define KernelPackage/ath9k-common
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 802.11n wireless devices (common code for ath9k and ath9k_htc)
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
HIDDEN:=1
DEPENDS+= @PCI_SUPPORT||USB_SUPPORT||TARGET_ar71xx +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko
endef
define KernelPackage/ath9k
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 802.11n PCI wireless cards support
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
DEPENDS+= @PCI_SUPPORT||TARGET_ar71xx +kmod-ath9k-common
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko
AUTOLOAD:=$(call AutoProbe,ath9k)
endef
define KernelPackage/ath9k/description
This module adds support for wireless adapters based on
Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
endef
define KernelPackage/ath9k/config
config ATH9K_SUPPORT_PCOEM
bool "Support chips used in PC OEM cards"
depends on PACKAGE_kmod-ath9k
config ATH9K_TX99
bool "Enable TX99 support (WARNING: testing only, breaks normal operation!)"
depends on PACKAGE_kmod-ath9k
config ATH9K_UBNTHSR
bool "Support for Ubiquiti UniFi Outdoor+ access point"
depends on PACKAGE_kmod-ath9k && TARGET_ar71xx_generic
default y
endef
define KernelPackage/ath9k-htc
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 802.11n USB device support
URL:=https://wireless.wiki.kernel.org/en/users/drivers/ath9k
DEPENDS+= @USB_SUPPORT +kmod-ath9k-common +kmod-usb-core +ath9k-htc-firmware
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_htc.ko
AUTOLOAD:=$(call AutoProbe,ath9k_htc)
endef
define KernelPackage/ath9k-htc/description
This module adds support for wireless adapters based on
Atheros USB AR9271 and AR7010 family of chipsets.
endef
define KernelPackage/ath10k
$(call KernelPackage/mac80211/Default)
TITLE:=Atheros 802.11ac wireless cards support
URL:=https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
DEPENDS+= @PCI_SUPPORT +kmod-ath +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +@DRIVER_11W_SUPPORT +@KERNEL_RELAY
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_core.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath10k/ath10k_pci.ko
AUTOLOAD:=$(call AutoLoad,55,ath10k_core ath10k_pci)
endef
define KernelPackage/ath10k/description
This module adds support for wireless adapters based on
Atheros IEEE 802.11ac family of chipsets. For now only
PCI is supported.
endef
#Broadcom firmware
ifneq ($(CONFIG_B43_FW_6_30),)
PKG_B43_FWV4_NAME:=broadcom-wl
PKG_B43_FWV4_VERSION:=6.30.163.46
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).wl_apsta.o
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
PKG_B43_FWV4_HASH:=a07c3b6b277833c7dbe61daa511f908cd66c5e2763eb7a0859abc36cd9335c2d
else
ifneq ($(CONFIG_B43_FW_5_10),)
PKG_B43_FWV4_NAME:=broadcom-wl
PKG_B43_FWV4_VERSION:=5.10.56.27.3
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta/wl_prebuilt.o
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)_mipsel.tar.bz2
PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
PKG_B43_FWV4_HASH:=26a8c370f48fc129d0731cfd751c36cae1419b0bc8ca35781126744e60eae009
else
ifneq ($(CONFIG_B43_FW_4_178),)
PKG_B43_FWV4_NAME:=broadcom-wl
PKG_B43_FWV4_VERSION:=4.178.10.4
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
PKG_B43_FWV4_HASH:=32f6ad98facbb9045646fdc8b54bb03086d204153253f9c65d0234a5d90ae53f
else
ifneq ($(CONFIG_B43_FW_5_100_138),)
PKG_B43_FWV4_NAME:=broadcom-wl
PKG_B43_FWV4_VERSION:=5.100.138
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/linux/wl_apsta.o
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
PKG_B43_FWV4_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
PKG_B43_FWV4_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f
else
PKG_B43_FWV4_NAME:=broadcom-wl
PKG_B43_FWV4_VERSION:=4.150.10.5
PKG_B43_FWV4_OBJECT:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION)/driver/wl_apsta_mimo.o
PKG_B43_FWV4_SOURCE:=$(PKG_B43_FWV4_NAME)-$(PKG_B43_FWV4_VERSION).tar.bz2
PKG_B43_FWV4_SOURCE_URL:=http://mirror2.openwrt.org/sources/
PKG_B43_FWV4_HASH:=a9f4e276a4d8d3a1cd0f2eb87080ae89b77f0a7140f06d4e9e2135fc44fdd533
endif
endif
endif
endif
ifneq ($(CONFIG_B43_OPENFIRMWARE),)
PKG_B43_FWV4_NAME:=broadcom-wl
PKG_B43_FWV4_VERSION:=5.2
PKG_B43_FWV4_OBJECT:=openfwwf-$(PKG_B43_FWV4_VERSION)
PKG_B43_FWV4_SOURCE:=openfwwf-$(PKG_B43_FWV4_VERSION).tar.gz
PKG_B43_FWV4_SOURCE_URL:=http://netweb.ing.unibs.it/~openfwwf/firmware
PKG_B43_FWV4_HASH:=9de03320083201080b2e94b81637ac07a159cf4e6f3481383e1a217e627bc0dc
endif
define Download/b43
FILE:=$(PKG_B43_FWV4_SOURCE)
URL:=$(PKG_B43_FWV4_SOURCE_URL)
HASH:=$(PKG_B43_FWV4_HASH)
endef
$(eval $(call Download,b43))
define KernelPackage/b43
$(call KernelPackage/mac80211/Default)
TITLE:=Broadcom 43xx wireless support
URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
KCONFIG:= \
CONFIG_HW_RANDOM=y
# Depend on PCI_SUPPORT to make sure we can select kmod-bcma or kmod-ssb
DEPENDS += \
@PCI_SUPPORT +kmod-mac80211 \
$(if $(CONFIG_PACKAGE_B43_USE_SSB),+kmod-ssb) \
$(if $(CONFIG_PACKAGE_B43_USE_BCMA),+kmod-bcma)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43/b43.ko
AUTOLOAD:=$(call AutoProbe,b43)
MENU:=1
endef
define KernelPackage/b43/config
config PACKAGE_B43_USE_SSB
select PACKAGE_kmod-ssb
tristate
depends on !TARGET_brcm47xx && !TARGET_brcm63xx
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_SSB
config PACKAGE_B43_USE_BCMA
select PACKAGE_kmod-bcma
tristate
depends on !TARGET_brcm47xx && !TARGET_bcm53xx
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA_AND_SSB
default PACKAGE_kmod-b43 if PACKAGE_B43_BUSES_BCMA
if PACKAGE_kmod-b43
choice
prompt "b43 firmware version"
default B43_FW_5_100_138
help
This option allows you to select the version of the b43 firmware.
config B43_FW_4_150
bool "Firmware 410.2160 from driver 4.150.10.5 (old stable)"
help
Old stable firmware for BCM43xx devices.
If unsure, select this.
config B43_FW_4_178
bool "Firmware 478.104 from driver 4.178.10.4"
help
Older firmware for BCM43xx devices.
If unsure, select the "stable" firmware.
config B43_FW_5_10
bool "Firmware 508.1084 from driver 5.10.56.27"
help
Older firmware for BCM43xx devices.
If unsure, select the "stable" firmware.
config B43_FW_5_100_138
bool "Firmware 666.2 from driver 5.100.138 (stable)"
help
The currently default firmware for BCM43xx devices.
This firmware currently gets most of the testing and is needed for some N-PHY devices.
If unsure, select the this firmware.
config B43_FW_6_30
bool "Firmware 784.2 from driver 6.30.163.46 (experimental)"
help
Newer experimental firmware for BCM43xx devices.
This firmware is mostly untested.
If unsure, select the "stable" firmware.
config B43_OPENFIRMWARE
bool "Open FirmWare for WiFi networks"
help
Opensource firmware for BCM43xx devices.
Do _not_ select this, unless you know what you are doing.
The Opensource firmware is not suitable for embedded devices, yet.
It does not support QoS, which is bad for AccessPoints.
It does not support hardware crypto acceleration, which is a showstopper
for embedded devices with low CPU resources.
If unsure, select the "stable" firmware.
endchoice
config B43_FW_SQUASH
bool "Remove unnecessary firmware files"
depends on !B43_OPENFIRMWARE
default y
help
This options allows you to remove unnecessary b43 firmware files
from the final rootfs image. This can reduce the rootfs size by
up to 200k.
If unsure, say Y.
config B43_FW_SQUASH_COREREVS
string "Core revisions to include"
depends on B43_FW_SQUASH
default "5,6,7,8,9,10,11,13,15" if TARGET_brcm47xx_legacy
default "16,28,29,30" if TARGET_brcm47xx_mips74k
default "5,6,7,8,9,10,11,13,15,16,28,29,30"
help
This is a comma seperated list of core revision numbers.
Example (keep files for rev5 only):
5
Example (keep files for rev5 and rev11):
5,11
config B43_FW_SQUASH_PHYTYPES
string "PHY types to include"
depends on B43_FW_SQUASH
default "G,N,LP" if TARGET_brcm47xx_legacy
default "N,HT" if TARGET_brcm47xx_mips74k
default "G,N,LP,HT"
help
This is a comma seperated list of PHY types:
A => A-PHY
AG => Dual A-PHY G-PHY
G => G-PHY
LP => LP-PHY
N => N-PHY
HT => HT-PHY
LCN => LCN-PHY
LCN40 => LCN40-PHY
AC => AC-PHY
Example (keep files for G-PHY only):
G
Example (keep files for G-PHY and N-PHY):
G,N
choice
prompt "Supported buses"
default PACKAGE_B43_BUSES_BCMA_AND_SSB
help
This allows choosing buses that b43 should support.
config PACKAGE_B43_BUSES_BCMA_AND_SSB
depends on !TARGET_brcm47xx_legacy && !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
bool "BCMA and SSB"
config PACKAGE_B43_BUSES_BCMA
depends on !TARGET_brcm47xx_legacy
bool "BCMA only"
config PACKAGE_B43_BUSES_SSB
depends on !TARGET_brcm47xx_mips74k && !TARGET_bcm53xx
bool "SSB only"
endchoice
config PACKAGE_B43_DEBUG
bool "Enable debug output and debugfs for b43"
default n
help
Enable additional debug output and runtime sanity checks for b43
and enables the debugfs interface.
If unsure, say N.
config PACKAGE_B43_PIO
bool "Enable support for PIO transfer mode"
default n
help
Enable support for using PIO instead of DMA. Unless you have DMA
transfer problems you don't need this.
If unsure, say N.
config PACKAGE_B43_PHY_G
bool "Enable support for G-PHYs"
default n if TARGET_brcm47xx_mips74k
default y
help
Enable support for G-PHY. This includes support for the following devices:
PCI: BCM4306, BCM4311, BCM4318
SoC: BCM5352E, BCM4712
If unsure, say Y.
config PACKAGE_B43_PHY_N
bool "Enable support for N-PHYs"
default y
help
Enable support for N-PHY. This includes support for the following devices:
PCI: BCM4321, BCM4322, BCM43222, BCM43224, BCM43225
SoC: BCM4716, BCM4717, BCM4718
Currently only 11g speed is available.
If unsure, say Y.
config PACKAGE_B43_PHY_LP
bool "Enable support for LP-PHYs"
default n if TARGET_brcm47xx_mips74k
default y
help
Enable support for LP-PHY. This includes support for the following devices:
PCI: BCM4312
SoC: BCM5354
If unsure, say Y.
config PACKAGE_B43_PHY_HT
bool "Enable support for HT-PHYs"
default n if TARGET_brcm47xx_legacy
default y
help
Enable support for HT-PHY. This includes support for the following devices:
PCI: BCM4331
Currently only 11g speed is available.
If unsure, say Y.
config PACKAGE_B43_PHY_LCN
bool "Enable support for LCN-PHYs"
depends on BROKEN
default n
help
Currently broken.
If unsure, say N.
endif
endef
define KernelPackage/b43/description
Kernel module for Broadcom 43xx wireless support (mac80211 stack) new
endef
define KernelPackage/b43legacy
$(call KernelPackage/mac80211/Default)
TITLE:=Broadcom 43xx-legacy wireless support
URL:=https://wireless.wiki.kernel.org/en/users/drivers/b43
KCONFIG:= \
CONFIG_HW_RANDOM=y
DEPENDS+= +kmod-mac80211 +!(TARGET_brcm47xx||TARGET_brcm63xx):kmod-ssb +b43legacy-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/b43legacy/b43legacy.ko
AUTOLOAD:=$(call AutoProbe,b43legacy)
MENU:=1
endef
define KernelPackage/b43legacy/description
Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new
endef
define KernelPackage/brcmutil
$(call KernelPackage/mac80211/Default)
TITLE:=Broadcom IEEE802.11n common driver parts
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
DEPENDS+=@PCI_SUPPORT||USB_SUPPORT
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmutil/brcmutil.ko
AUTOLOAD:=$(call AutoProbe,brcmutil)
MENU:=1
endef
define KernelPackage/brcmutil/description
This module contains some common parts needed by Broadcom Wireless drivers brcmsmac and brcmfmac.
endef
define KernelPackage/brcmutil/config
if PACKAGE_kmod-brcmutil
config PACKAGE_BRCM80211_DEBUG
bool "Broadcom wireless driver debugging"
help
Say Y, if you want to debug brcmsmac and brcmfmac wireless driver.
endif
endef
PKG_BRCMSMAC_FW_NAME:=broadcom-wl
PKG_BRCMSMAC_FW_VERSION:=5.100.138
PKG_BRCMSMAC_FW_OBJECT:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION)/linux/wl_apsta.o
PKG_BRCMSMAC_FW_SOURCE:=$(PKG_BRCMSMAC_FW_NAME)-$(PKG_BRCMSMAC_FW_VERSION).tar.bz2
PKG_BRCMSMAC_FW_SOURCE_URL:=http://www.lwfinger.com/b43-firmware/
PKG_BRCMSMAC_FW_HASH:=f1e7067aac5b62b67b8b6e4c517990277804339ac16065eb13c731ff909ae46f
define Download/brcmsmac
FILE:=$(PKG_BRCMSMAC_FW_SOURCE)
URL:=$(PKG_BRCMSMAC_FW_SOURCE_URL)
HASH:=$(PKG_BRCMSMAC_FW_HASH)
endef
$(eval $(call Download,brcmsmac))
define KernelPackage/brcmsmac
$(call KernelPackage/mac80211/Default)
TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 +kmod-brcmutil +!BRCMSMAC_USE_FW_FROM_WL:brcmsmac-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmsmac/brcmsmac.ko
AUTOLOAD:=$(call AutoProbe,brcmsmac)
MENU:=1
endef
define KernelPackage/brcmsmac/description
Kernel module for Broadcom IEEE802.11n PCIe Wireless cards
endef
define KernelPackage/brcmsmac/config
if PACKAGE_kmod-brcmsmac
config BRCMSMAC_USE_FW_FROM_WL
bool "Use firmware extracted from broadcom proprietary driver"
default y
help
Instead of using the official brcmsmac firmware a firmware
version 666.2 extracted from the proprietary Broadcom driver
is used. This is needed to get core rev 17 used in bcm4716
to work.
If unsure, say Y.
endif
endef
define KernelPackage/brcmfmac
$(call KernelPackage/mac80211/Default)
TITLE:=Broadcom IEEE802.11n USB FullMAC WLAN driver
URL:=https://wireless.wiki.kernel.org/en/users/drivers/brcm80211
DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +kmod-brcmutil \
+BRCMFMAC_SDIO:kmod-mmc \
+BRCMFMAC_USB:kmod-usb-core +BRCMFMAC_USB:brcmfmac-firmware-usb
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/broadcom/brcm80211/brcmfmac/brcmfmac.ko
AUTOLOAD:=$(call AutoProbe,brcmfmac)
endef
define KernelPackage/brcmfmac/description
Kernel module for Broadcom IEEE802.11n USB Wireless cards
endef
define KernelPackage/brcmfmac/config
if PACKAGE_kmod-brcmfmac
config BRCMFMAC_SDIO
bool "Enable SDIO bus interface support"
default y if TARGET_brcm2708
default n
help
Enable support for cards attached to an SDIO bus.
Select this option only if you are sure that your
board has a Broadcom wireless chip atacched to
that bus.
config BRCMFMAC_USB
bool "Enable USB bus interface support"
depends on USB_SUPPORT
default y
help
Supported USB connected chipsets:
BCM43235, BCM43236, BCM43238 (all in revision 3 only)
BCM43143, BCM43242, BCM43566, BCM43569
config BRCMFMAC_PCIE
bool "Enable PCIE bus interface support"
depends on PCI_SUPPORT
default y
help
Supported PCIe connected chipsets:
BCM4354, BCM4356, BCM43567, BCM43570, BCM43602
endif
endef
define KernelPackage/carl9170
$(call KernelPackage/mac80211/Default)
TITLE:=Driver for Atheros AR9170 USB sticks
DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core +kmod-input-core +@DRIVER_11N_SUPPORT +carl9170-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko
AUTOLOAD:=$(call AutoProbe,carl9170)
endef
define KernelPackage/hermes
$(call KernelPackage/mac80211/Default)
TITLE:=Hermes 802.11b chipset support
DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT +kmod-crypto-michael-mic
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco.ko
AUTOLOAD:=$(call AutoProbe,orinoco)
endef
define KernelPackage/hermes/description
Kernel support for Hermes 802.11b chipsets
endef
define KernelPackage/hermes-pci
$(call KernelPackage/mac80211/Default)
TITLE:=Intersil Prism 2.5 PCI support
DEPENDS:=@PCI_SUPPORT +kmod-hermes
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_pci.ko
AUTOLOAD:=$(call AutoProbe,orinoco_pci)
endef
define KernelPackage/hermes-pci/description
Kernel modules for Intersil Prism 2.5 PCI support
endef
define KernelPackage/hermes-plx
$(call KernelPackage/mac80211/Default)
TITLE:=PLX9052 based PCI adaptor
DEPENDS:=@PCI_SUPPORT +kmod-hermes
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_plx.ko
AUTOLOAD:=$(call AutoProbe,orinoco_plx)
endef
define KernelPackage/hermes-plx/description
Kernel modules for Hermes in PLX9052 based PCI adaptors
endef
define KernelPackage/hermes-pcmcia
$(call KernelPackage/mac80211/Default)
TITLE:=Hermes based PCMCIA adaptors
DEPENDS:=@PCMCIA_SUPPORT +kmod-hermes @BROKEN
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/orinoco/orinoco_cs.ko
AUTOLOAD:=$(call AutoProbe,orinoco_cs)
endef
define KernelPackage/hermes-pcmcia/description
Kernel modules for Hermes based PCMCIA adaptors
endef
define KernelPackage/iwlwifi
$(call KernelPackage/mac80211/Default)
DEPENDS:= +kmod-mac80211 @PCI_SUPPORT +@DRIVER_11N_SUPPORT +iwlwifi-firmware @!LINUX_3_18
TITLE:=Intel AGN Wireless support
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/iwlwifi.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/dvm/iwldvm.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlwifi/mvm/iwlmvm.ko
AUTOLOAD:=$(call AutoProbe,iwlwifi iwldvm iwlmvm)
MENU:=1
endef
define KernelPackage/iwlwifi/description
iwlwifi kernel module for
Intel Wireless WiFi Link 6250AGN Adapter
Intel 6000 Series Wi-Fi Adapters (6200AGN and 6300AGN)
Intel WiFi Link 1000BGN
Intel Wireless WiFi 5150AGN
Intel Wireless WiFi 5100AGN, 5300AGN, and 5350AGN
Intel 6005 Series Wi-Fi Adapters
Intel 6030 Series Wi-Fi Adapters
Intel Wireless WiFi Link 6150BGN 2 Adapter
Intel 100 Series Wi-Fi Adapters (100BGN and 130BGN)
Intel 2000 Series Wi-Fi Adapters
Intel 7260 Wi-Fi Adapter
Intel 3160 Wi-Fi Adapter
Intel 7265 Wi-Fi Adapter
Intel 8260 Wi-Fi Adapter
Intel 3165 Wi-Fi Adapter
endef
define KernelPackage/iwlwifi/config
if PACKAGE_kmod-iwlwifi
config PACKAGE_IWLWIFI_DEBUG
bool "Enable full debugging output in the iwlwifi driver"
default n
help
This option will enable debug tracing output for the iwlwifi drivers
This will result in the kernel module being ~100k larger. You can
control which debug output is sent to the kernel log by setting the
value in
/sys/module/iwlwifi/parameters/debug
This entry will only exist if this option is enabled.
To set a value, simply echo an 8-byte hex value to the same file:
% echo 0x43fff > /sys/module/iwlwifi/parameters/debug
You can find the list of debug mask values in:
drivers/net/wireless/intel/iwlwifi/iwl-debug.h
If this is your first time using this driver, you should say Y here
as the debug information can assist others in helping you resolve
any problems you may encounter.
config PACKAGE_IWLWIFI_DEBUGFS
bool "iwlwifi debugfs support"
depends on PACKAGE_MAC80211_DEBUGFS
default n
help
Enable creation of debugfs files for the iwlwifi drivers. This
is a low-impact option that allows getting insight into the
driver's state at runtime.
endif
endef
define KernelPackage/iwl-legacy
$(call KernelPackage/mac80211/Default)
DEPENDS:= +kmod-mac80211 @PCI_SUPPORT
TITLE:=Intel legacy Wireless support
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwlegacy.ko
AUTOLOAD:=$(call AutoProbe,iwlegacy)
endef
define KernelPackage/iwl-legacy/description
iwl-legacy kernel module for legacy Intel wireless support
endef
define KernelPackage/iwl3945
$(call KernelPackage/mac80211/Default)
DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +iwl3945-firmware
TITLE:=Intel iwl3945 Wireless support
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl3945.ko
AUTOLOAD:=$(call AutoProbe,iwl3945)
endef
define KernelPackage/iwl3945/description
iwl3945 kernel module for Intel 3945 support
endef
define KernelPackage/iwl4965
$(call KernelPackage/mac80211/Default)
DEPENDS:= +kmod-mac80211 +kmod-iwl-legacy +@DRIVER_11N_SUPPORT +iwl4965-firmware
TITLE:=Intel iwl4965 Wireless support
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/iwlegacy/iwl4965.ko
AUTOLOAD:=$(call AutoProbe,iwl4965)
endef
define KernelPackage/iwl4965/description
iwl4965 kernel module for Intel 4965 support
endef
define KernelPackage/lib80211
$(call KernelPackage/mac80211/Default)
TITLE:=802.11 Networking stack
DEPENDS:=+kmod-cfg80211 +kmod-crypto-hash
FILES:= \
$(PKG_BUILD_DIR)/net/wireless/lib80211.ko \
$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_wep.ko \
$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_ccmp.ko \
$(PKG_BUILD_DIR)/net/wireless/lib80211_crypt_tkip.ko
AUTOLOAD:=$(call AutoProbe, \
lib80211 \
lib80211_crypt_wep \
lib80211_crypt_ccmp \
lib80211_crypt_tkip \
)
endef
define KernelPackage/lib80211/description
Kernel modules for 802.11 Networking stack
Includes:
- lib80211
- lib80211_crypt_wep
- lib80211_crypt_tkip
- lib80211_crytp_ccmp
endef
define KernelPackage/libipw
$(call KernelPackage/mac80211/Default)
TITLE:=libipw for ipw2100 and ipw2200
DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko
AUTOLOAD:=$(call AutoProbe,libipw)
endef
define KernelPackage/libipw/description
Hardware independent IEEE 802.11 networking stack for ipw2100 and ipw2200.
endef
IPW2100_NAME:=ipw2100-fw
IPW2100_VERSION:=1.3
define Download/ipw2100
URL:=http://bughost.org/firmware/
FILE:=$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
HASH:=e1107c455e48d324a616b47a622593bc8413dcce72026f72731c0b03dae3a7a2
endef
$(eval $(call Download,ipw2100))
define KernelPackage/ipw2100
$(call KernelPackage/mac80211/Default)
TITLE:=Intel IPW2100 driver
DEPENDS:=@PCI_SUPPORT +kmod-libipw
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2100.ko
AUTOLOAD:=$(call AutoProbe,ipw2100)
endef
define KernelPackage/ipw2100/description
Kernel support for Intel IPW2100
Includes:
- ipw2100
endef
IPW2200_NAME:=ipw2200-fw
IPW2200_VERSION:=3.1
define Download/ipw2200
URL:=http://bughost.org/firmware/
FILE:=$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
HASH:=c6818c11c18cc030d55ff83f64b2bad8feef485e7742f84f94a61d811a6258bd
endef
$(eval $(call Download,ipw2200))
define KernelPackage/ipw2200
$(call KernelPackage/mac80211/Default)
TITLE:=Intel IPW2200 driver
DEPENDS:=@PCI_SUPPORT +kmod-libipw
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/ipw2200.ko
AUTOLOAD:=$(call AutoProbe,ipw2200)
endef
define KernelPackage/ipw2200/description
Kernel support for Intel IPW2200
Includes:
- ipw2200
endef
define KernelPackage/libertas-usb
$(call KernelPackage/mac80211/Default)
DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-usb-firmware
TITLE:=Marvell 88W8015 Wireless Driver
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/usb8xxx.ko
AUTOLOAD:=$(call AutoProbe,libertas usb8xxx)
endef
define KernelPackage/libertas-sdio
$(call KernelPackage/mac80211/Default)
DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware
TITLE:=Marvell 88W8686 Wireless Driver
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_sdio.ko
AUTOLOAD:=$(call AutoProbe,libertas libertas_sdio)
endef
define KernelPackage/libertas-spi
$(call KernelPackage/mac80211/Default)
SUBMENU:=Wireless Drivers
DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-spi-firmware
KCONFIG := \
CONFIG_SPI=y \
CONFIG_SPI_MASTER=y
TITLE:=Marvell 88W8686 SPI Wireless Driver
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas_spi.ko
AUTOLOAD:=$(call AutoProbe,libertas libertas_spi)
endef
define KernelPackage/mac80211-hwsim
$(call KernelPackage/mac80211/Default)
TITLE:=mac80211 HW simulation device
DEPENDS+= +kmod-mac80211 +@DRIVER_11AC_SUPPORT +@DRIVER_11N_SUPPORT +@DRIVER_11W_SUPPORT
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko
AUTOLOAD:=$(call AutoProbe,mac80211_hwsim)
endef
define KernelPackage/mt7601u
$(call KernelPackage/mac80211/Default)
TITLE:=MT7601U-based USB dongles Wireless Driver
DEPENDS+= +kmod-mac80211 +@DRIVER_11N_SUPPORT @USB_SUPPORT +kmod-usb-core +mt7601u-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mediatek/mt7601u/mt7601u.ko
AUTOLOAD:=$(call AutoProbe,mt7601u)
endef
define KernelPackage/mwl8k
$(call KernelPackage/mac80211/Default)
TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +mwl8k-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwl8k.ko
AUTOLOAD:=$(call AutoProbe,mwl8k)
endef
define KernelPackage/mwl8k/description
Kernel modules for Marvell TOPDOG 802.11 Wireless cards
endef
define KernelPackage/mwifiex-pcie
$(call KernelPackage/mac80211/Default)
TITLE:=Driver for Marvell 802.11n/802.11ac PCIe Wireless cards
URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
DEPENDS+= @PCI_SUPPORT +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-pcie-firmware
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_pcie.ko
AUTOLOAD:=$(call AutoProbe,mwifiex_pcie)
endef
define KernelPackage/mwifiex-pcie/description
Kernel modules for Marvell 802.11n/802.11ac PCIe Wireless cards
endef
define KernelPackage/mwifiex-sdio
$(call KernelPackage/mac80211/Default)
TITLE:=Driver for Marvell 802.11n/802.11ac SDIO Wireless cards
URL:=http://wireless.kernel.org/en/users/Drivers/mwifiex
DEPENDS+= +kmod-mmc +kmod-mac80211 +@DRIVER_11N_SUPPORT +@DRIVER_11AC_SUPPORT +mwifiex-sdio-firmware
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/marvell/mwifiex/mwifiex_sdio.ko
AUTOLOAD:=$(call AutoProbe,mwifiex_sdio)
endef
define KernelPackage/mwifiex-sdio/description
Kernel modules for Marvell 802.11n/802.11ac SDIO Wireless cards
endef
define KernelPackage/p54/Default
$(call KernelPackage/mac80211/Default)
TITLE:=Prism54 Drivers
endef
define KernelPackage/p54/description
Kernel module for Prism54 chipsets (mac80211)
endef
define KernelPackage/p54-common
$(call KernelPackage/p54/Default)
DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-lib-crc-ccitt
TITLE+= (COMMON)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54common.ko
endef
define KernelPackage/p54-pci
$(call KernelPackage/p54/Default)
TITLE+= (PCI)
DEPENDS+= @PCI_SUPPORT +kmod-p54-common +p54-pci-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54pci.ko
AUTOLOAD:=$(call AutoProbe,p54pci)
endef
define KernelPackage/p54-usb
$(call KernelPackage/p54/Default)
TITLE+= (USB)
DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common +p54-usb-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54usb.ko
AUTOLOAD:=$(call AutoProbe,p54usb)
endef
define KernelPackage/p54-spi
$(call KernelPackage/p54/Default)
TITLE+= (SPI)
DEPENDS+= @TARGET_omap24xx +kmod-p54-common +p54-spi-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intersil/p54/p54spi.ko
AUTOLOAD:=$(call AutoProbe,p54spi)
endef
define KernelPackage/rt2x00/Default
$(call KernelPackage/mac80211/Default)
TITLE:=Ralink Drivers for RT2x00 cards
endef
define KernelPackage/rt2x00-lib
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-lib-crc-itu-t
TITLE+= (LIB)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00lib.ko
MENU:=1
endef
define KernelPackage/rt2x00-lib/config
if PACKAGE_kmod-rt2x00-lib
config PACKAGE_RT2X00_LIB_DEBUGFS
bool "Enable rt2x00 debugfs support"
depends on PACKAGE_MAC80211_DEBUGFS
help
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
most important register types of the rt2x00 hardware.
config PACKAGE_RT2X00_DEBUG
bool "Enable rt2x00 debug output"
help
Enable debugging output for all rt2x00 modules
endif
endef
define KernelPackage/rt2x00-mmio
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6
HIDDEN:=1
TITLE+= (MMIO)
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00mmio.ko
endef
define KernelPackage/rt2x00-pci
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-mmio +kmod-rt2x00-lib
HIDDEN:=1
TITLE+= (PCI)
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00pci.ko
AUTOLOAD:=$(call AutoProbe,rt2x00pci)
endef
define KernelPackage/rt2x00-usb
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core
HIDDEN:=1
TITLE+= (USB)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00usb.ko
AUTOLOAD:=$(call AutoProbe,rt2x00usb)
endef
define KernelPackage/rt2800-lib
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-lib-crc-ccitt +@DRIVER_11N_SUPPORT
HIDDEN:=1
TITLE+= (rt2800 LIB)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800lib.ko
endef
define KernelPackage/rt2400-pci
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
TITLE+= (RT2400 PCI)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2400pci.ko
AUTOLOAD:=$(call AutoProbe,rt2400pci)
endef
define KernelPackage/rt2500-pci
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
TITLE+= (RT2500 PCI)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500pci.ko
AUTOLOAD:=$(call AutoProbe,rt2500pci)
endef
define KernelPackage/rt2500-usb
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
TITLE+= (RT2500 USB)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2500usb.ko
AUTOLOAD:=$(call AutoProbe,rt2500usb)
endef
define KernelPackage/rt2800-mmio
$(call KernelPackage/rt2x00/Default)
TITLE += (RT28xx/RT3xxx MMIO)
DEPENDS += +kmod-rt2800-lib +kmod-rt2x00-mmio
HIDDEN:=1
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800mmio.ko
endef
define KernelPackage/rt2800-soc
$(call KernelPackage/rt2x00/Default)
DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620) +kmod-rt2800-mmio +kmod-rt2800-lib
TITLE += (RT28xx/RT3xxx SoC)
FILES := \
$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2x00soc.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800soc.ko
AUTOLOAD:=$(call AutoProbe,rt2800soc)
endef
define KernelPackage/rt2800-pci
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-rt2800-mmio +rt2800-pci-firmware
TITLE+= (RT2860 PCI)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800pci.ko
AUTOLOAD:=$(call AutoProbe,rt2800pci)
endef
define KernelPackage/rt2800-usb
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-lib-crc-ccitt +rt2800-usb-firmware
TITLE+= (RT2870 USB)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt2800usb.ko
AUTOLOAD:=$(call AutoProbe,rt2800usb)
endef
define KernelPackage/rt61-pci
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci +rt61-pci-firmware
TITLE+= (RT2x61 PCI)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt61pci.ko
AUTOLOAD:=$(call AutoProbe,rt61pci)
endef
define KernelPackage/rt73-usb
$(call KernelPackage/rt2x00/Default)
DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb +rt73-usb-firmware
TITLE+= (RT73 USB)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ralink/rt2x00/rt73usb.ko
AUTOLOAD:=$(call AutoProbe,rt73usb)
endef
define KernelPackage/rtl818x/Default
$(call KernelPackage/mac80211/Default)
TITLE:=Realtek Drivers for RTL818x devices
URL:=http://wireless.kernel.org/en/users/Drivers/rtl8187
DEPENDS+= +kmod-eeprom-93cx6 +kmod-mac80211
endef
define KernelPackage/rtl8180
$(call KernelPackage/rtl818x/Default)
DEPENDS+= @PCI_SUPPORT
TITLE+= (RTL8180 PCI)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8180/rtl818x_pci.ko
AUTOLOAD:=$(call AutoProbe,rtl818x_pci)
endef
define KernelPackage/rtl8187
$(call KernelPackage/rtl818x/Default)
DEPENDS+= @USB_SUPPORT +kmod-usb-core
TITLE+= (RTL8187 USB)
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl818x/rtl8187/rtl8187.ko
AUTOLOAD:=$(call AutoProbe,rtl8187)
endef
define KernelPackage/rtlwifi/config
config PACKAGE_RTLWIFI_DEBUG
bool "Realtek wireless debugging"
depends on PACKAGE_kmod-rtlwifi
help
Say Y, if you want to debug realtek wireless drivers.
endef
define KernelPackage/rtlwifi
$(call KernelPackage/mac80211/Default)
TITLE:=Realtek common driver part
DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT) +kmod-mac80211 +@DRIVER_11N_SUPPORT
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtlwifi.ko
HIDDEN:=1
endef
define KernelPackage/rtlwifi-pci
$(call KernelPackage/mac80211/Default)
TITLE:=Realtek common driver part (PCI support)
DEPENDS+= @PCI_SUPPORT +kmod-rtlwifi
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_pci.ko
AUTOLOAD:=$(call AutoProbe,rtl_pci)
HIDDEN:=1
endef
define KernelPackage/rtlwifi-usb
$(call KernelPackage/mac80211/Default)
TITLE:=Realtek common driver part (USB support)
DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-rtlwifi
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl_usb.ko
AUTOLOAD:=$(call AutoProbe,rtl_usb)
HIDDEN:=1
endef
define KernelPackage/rtl8192c-common
$(call KernelPackage/mac80211/Default)
TITLE:=Realtek RTL8192CE/RTL8192CU common support module
DEPENDS+= +kmod-rtlwifi
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192c/rtl8192c-common.ko
HIDDEN:=1
endef
define KernelPackage/rtl8192ce
$(call KernelPackage/mac80211/Default)
TITLE:=Realtek RTL8192CE/RTL8188CE support
DEPENDS+= +kmod-rtlwifi-pci +kmod-rtl8192c-common +rtl8192ce-firmware
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/rtl8192ce.ko
AUTOLOAD:=$(call AutoProbe,rtl8192ce)
endef
define KernelPackage/rtl8192se
$(call KernelPackage/mac80211/Default)
TITLE:=Realtek RTL8192SE/RTL8191SE support
DEPENDS+= +kmod-rtlwifi-pci +rtl8192se-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192se/rtl8192se.ko
AUTOLOAD:=$(call AutoProbe,rtl8192se)
endef
define KernelPackage/rtl8192de
$(call KernelPackage/mac80211/Default)
TITLE:=Realtek RTL8192DE/RTL8188DE support
DEPENDS+= +kmod-rtlwifi-pci +rtl8192de-firmware
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192de/rtl8192de.ko
AUTOLOAD:=$(call AutoProbe,rtl8192de)
endef
define KernelPackage/rtl8192cu
$(call KernelPackage/mac80211/Default)
TITLE:=Realtek RTL8192CU/RTL8188CU support
DEPENDS+= +kmod-rtlwifi-usb +kmod-rtl8192c-common +rtl8192cu-firmware
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rtl8192cu.ko
AUTOLOAD:=$(call AutoProbe,rtl8192cu)
endef
define KernelPackage/rtl8xxxu
$(call KernelPackage/mac80211/Default)
TITLE:=alternative Realtek RTL8XXXU support
DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
FILES:= $(PKG_BUILD_DIR)/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko
AUTOLOAD:=$(call AutoProbe,rtl8xxxu)
endef
define KernelPackage/rtl8xxxu/description
This is an alternative driver for various Realtek RTL8XXX
parts written to utilize the Linux mac80211 stack.
The driver is known to work with a number of RTL8723AU,
RL8188CU, RTL8188RU, RTL8191CU, and RTL8192CU devices
This driver is under development and has a limited feature
set. In particular it does not yet support 40MHz channels
and power management. However it should have a smaller
memory footprint than the vendor drivers and benetifs
from the in kernel mac80211 stack.
It can coexist with drivers from drivers/staging/rtl8723au,
drivers/staging/rtl8192u, and drivers/net/wireless/rtlwifi,
but you will need to control which module you wish to load.
RTL8XXXU_UNTESTED is enabled
This option enables detection of Realtek 8723/8188/8191/8192 WiFi
USB devices which have not been tested directly by the driver
author or reported to be working by third parties.
Please report your results!
endef
define KernelPackage/wlcore
$(call KernelPackage/mac80211/Default)
TITLE:=TI common driver part
DEPENDS+= +kmod-mmc +kmod-mac80211 +@DRIVER_11N_SUPPORT
FILES:= \
$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore.ko \
$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wlcore/wlcore_sdio.ko
AUTOLOAD:=$(call AutoProbe,wlcore wlcore_sdio)
endef
define KernelPackage/wlcore/description
This module contains some common parts needed by TI Wireless drivers.
endef
define KernelPackage/wl12xx
$(call KernelPackage/mac80211/Default)
TITLE:=Driver for TI WL12xx
URL:=http://wireless.kernel.org/en/users/Drivers/wl12xx
DEPENDS+= +kmod-wlcore +wl12xx-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl12xx/wl12xx.ko
AUTOLOAD:=$(call AutoProbe,wl12xx)
endef
define KernelPackage/wl12xx/description
Kernel modules for TI WL12xx
endef
define KernelPackage/wl18xx
$(call KernelPackage/mac80211/Default)
TITLE:=Driver for TI WL18xx
URL:=http://wireless.kernel.org/en/users/Drivers/wl18xx
DEPENDS+= +kmod-wlcore +wl18xx-firmware
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ti/wl18xx/wl18xx.ko
AUTOLOAD:=$(call AutoProbe,wl18xx)
endef
define KernelPackage/wl18xx/description
Kernel modules for TI WL18xx
endef
ZD1211FW_NAME:=zd1211-firmware
ZD1211FW_VERSION:=1.4
define Download/zd1211rw
FILE:=$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
URL:=@SF/zd1211/
HASH:=866308f6f59f7075f075d4959dff2ede47735c751251fecd1496df1ba4d338e1
endef
$(eval $(call Download,zd1211rw))
define KernelPackage/zd1211rw
$(call KernelPackage/mac80211/Default)
TITLE:=Zydas ZD1211 support
DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zydas/zd1211rw/zd1211rw.ko
AUTOLOAD:=$(call AutoProbe,zd1211rw)
endef
config_package=$(if $(CONFIG_PACKAGE_kmod-$(1)),m)
config-y:= \
WLAN \
NL80211_TESTMODE \
CFG80211_WEXT \
CFG80211_INTERNAL_REGDB \
CFG80211_CERTIFICATION_ONUS \
MAC80211_RC_MINSTREL \
MAC80211_RC_MINSTREL_HT \
MAC80211_RC_MINSTREL_VHT \
MAC80211_RC_DEFAULT_MINSTREL \
WLAN_VENDOR_ADMTEK \
WLAN_VENDOR_ATH \
WLAN_VENDOR_ATMEL \
WLAN_VENDOR_BROADCOM \
WLAN_VENDOR_CISCO \
WLAN_VENDOR_INTEL \
WLAN_VENDOR_INTERSIL \
WLAN_VENDOR_MARVELL \
WLAN_VENDOR_MEDIATEK \
WLAN_VENDOR_RALINK \
WLAN_VENDOR_REALTEK \
WLAN_VENDOR_RSI \
WLAN_VENDOR_ST \
WLAN_VENDOR_TI \
WLAN_VENDOR_ZYDAS \
config-$(call config_package,cfg80211) += CFG80211
config-$(call config_package,mac80211) += MAC80211
config-$(CONFIG_PACKAGE_MAC80211_MESH) += MAC80211_MESH
ifdef CONFIG_PACKAGE_MAC80211_DEBUGFS
config-y += \
CFG80211_DEBUGFS \
MAC80211_DEBUGFS \
ATH9K_DEBUGFS \
ATH9K_HTC_DEBUGFS \
ATH10K_DEBUGFS \
CARL9170_DEBUGFS \
ATH5K_DEBUG
endif
ifdef CONFIG_PACKAGE_MAC80211_TRACING
config-y += \
ATH10K_TRACING \
ATH6KL_TRACING \
ATH_TRACEPOINTS \
WIL6210_TRACING \
ATH5K_TRACER \
IWLWIFI_DEVICE_TRACING
endif
config-$(call config_package,lib80211) += LIB80211 LIB80211_CRYPT_WEP LIB80211_CRYPT_CCMP LIB80211_CRYPT_TKIP
config-$(call config_package,airo) += AIRO
config-$(call config_package,ath) += ATH_CARDS ATH_COMMON
config-$(CONFIG_PACKAGE_ATH_DEBUG) += ATH_DEBUG ATH10K_DEBUG ATH9K_STATION_STATISTICS
config-$(CONFIG_PACKAGE_ATH_DFS) += ATH9K_DFS_CERTIFIED ATH10K_DFS_CERTIFIED
config-$(call config_package,ath9k) += ATH9K
config-$(call config_package,ath9k-common) += ATH9K_COMMON
config-$(CONFIG_TARGET_ar71xx) += ATH9K_AHB
config-$(CONFIG_PCI) += ATH9K_PCI
config-$(CONFIG_ATH_USER_REGD) += ATH_USER_REGD
config-$(CONFIG_ATH9K_SUPPORT_PCOEM) += ATH9K_PCOEM
config-$(CONFIG_ATH9K_TX99) += ATH9K_TX99
config-$(CONFIG_ATH9K_UBNTHSR) += ATH9K_UBNTHSR
config-$(call config_package,ath9k-htc) += ATH9K_HTC
config-$(call config_package,ath10k) += ATH10K ATH10K_PCI
config-$(call config_package,ath5k) += ATH5K
ifdef CONFIG_TARGET_ath25
config-y += ATH5K_AHB
else
config-y += ATH5K_PCI
endif
config-$(call config_package,carl9170) += CARL9170
config-$(call config_package,b43) += B43
config-$(CONFIG_PACKAGE_B43_BUSES_BCMA_AND_SSB) += B43_BUSES_BCMA_AND_SSB
config-$(CONFIG_PACKAGE_B43_BUSES_BCMA) += B43_BUSES_BCMA
config-$(CONFIG_PACKAGE_B43_BUSES_SSB) += B43_BUSES_SSB
config-$(CONFIG_PACKAGE_B43_PHY_G) += B43_PHY_G
config-$(CONFIG_PACKAGE_B43_PHY_N) += B43_PHY_N
config-$(CONFIG_PACKAGE_B43_PHY_LP) += B43_PHY_LP
config-$(CONFIG_PACKAGE_B43_PHY_HT) += B43_PHY_HT
config-$(CONFIG_PACKAGE_B43_PIO) += B43_PIO
config-$(CONFIG_PACKAGE_B43_DEBUG) += B43_DEBUG
config-$(call config_package,b43legacy) += B43LEGACY
config-y += B43LEGACY_DMA_MODE
config-$(call config_package,brcmutil) += BRCMUTIL
config-$(call config_package,brcmsmac) += BRCMSMAC
config-$(call config_package,brcmfmac) += BRCMFMAC
config-$(CONFIG_BRCMFMAC_SDIO) += BRCMFMAC_SDIO
config-$(CONFIG_BRCMFMAC_USB) += BRCMFMAC_USB
config-$(CONFIG_BRCMFMAC_PCIE) += BRCMFMAC_PCIE
config-$(CONFIG_PACKAGE_BRCM80211_DEBUG) += BRCMDBG
config-$(call config_package,mac80211-hwsim) += MAC80211_HWSIM
config-$(call config_package,mt7601u) += MT7601U
config-y += WL_MEDIATEK
config-$(call config_package,rt2x00-lib) += RT2X00 RT2X00_LIB
config-$(call config_package,rt2x00-pci) += RT2X00_LIB_PCI
config-$(call config_package,rt2x00-mmio) += RT2X00_LIB_MMIO
config-$(call config_package,rt2x00-usb) += RT2X00_LIB_USB
config-$(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS) += RT2X00_LIB_DEBUGFS
config-$(CONFIG_PACKAGE_RT2X00_DEBUG) += RT2X00_DEBUG
config-$(call config_package,rt2400-pci) += RT2400PCI
config-$(call config_package,rt2500-pci) += RT2500PCI
config-$(call config_package,rt2500-usb) += RT2500USB
config-$(call config_package,rt61-pci) += RT61PCI
config-$(call config_package,rt73-usb) += RT73USB
config-$(call config_package,rt2800-lib) += RT2800_LIB
config-$(call config_package,rt2800-soc) += RT2800SOC
config-$(call config_package,rt2800-pci) += RT2800PCI
config-y += RT2800PCI_RT33XX RT2800PCI_RT35XX RT2800PCI_RT53XX RT2800PCI_RT3290
config-$(call config_package,rt2800-usb) += RT2800USB
config-y += RT2800USB_RT33XX RT2800USB_RT35XX RT2800USB_RT3573 RT2800USB_RT53XX RT2800USB_RT55XX RT2800USB_UNKNOWN
config-$(call config_package,iwl-legacy) += IWLEGACY
config-$(call config_package,iwl3945) += IWL3945
config-$(call config_package,iwl4965) += IWL4965
config-$(call config_package,iwlwifi) += IWLWIFI IWLDVM IWLMVM
config-$(CONFIG_PACKAGE_IWLWIFI_DEBUG)+= IWLWIFI_DEBUG
config-$(CONFIG_PACKAGE_IWLWIFI_DEBUGFS)+= IWLWIFI_DEBUGFS
config-$(call config_package,libipw) += LIBIPW
config-$(call config_package,ipw2100) += IPW2100
config-$(call config_package,ipw2200) += IPW2200
config-$(call config_package,p54-common) += P54_COMMON
config-$(call config_package,p54-pci) += P54_PCI
config-$(call config_package,p54-usb) += P54_USB
config-$(call config_package,p54-spi) += P54_SPI
config-$(call config_package,hermes) += HERMES
config-$(call config_package,hermes-pci) += PCI_HERMES
config-$(call config_package,hermes-plx) += PLX_HERMES
config-$(call config_package,hermes-pcmcia) += PCMCIA_HERMES
config-y += HERMES_PRISM
config-$(call config_package,adm8211) += ADM8211
config-$(call config_package,libertas-sdio) += LIBERTAS LIBERTAS_SDIO
config-$(call config_package,libertas-usb) += LIBERTAS LIBERTAS_USB
config-$(call config_package,libertas-spi) += LIBERTAS LIBERTAS_SPI
config-$(call config_package,mwl8k) += MWL8K
config-$(call config_package,mwifiex-pcie) += MWIFIEX MWIFIEX_PCIE
config-$(call config_package,mwifiex-sdio) += MWIFIEX MWIFIEX_SDIO
config-$(call config_package,rtl8180) += RTL8180
config-$(call config_package,rtl8187) += RTL8187
config-$(call config_package,wlcore) += WLCORE WLCORE_SDIO
config-$(call config_package,wl12xx) += WL12XX
config-$(call config_package,wl18xx) += WL18XX
config-y += WL_TI WILINK_PLATFORM_DATA
config-$(call config_package,zd1211rw) += ZD1211RW
config-$(call config_package,rtlwifi) += RTL_CARDS RTLWIFI
config-$(call config_package,rtlwifi-pci) += RTLWIFI_PCI
config-$(call config_package,rtlwifi-usb) += RTLWIFI_USB
config-$(call config_package,rtl8192c-common) += RTL8192C_COMMON
config-$(call config_package,rtl8192ce) += RTL8192CE
config-$(call config_package,rtl8192se) += RTL8192SE
config-$(call config_package,rtl8192de) += RTL8192DE
config-$(call config_package,rtl8192cu) += RTL8192CU
config-$(CONFIG_PACKAGE_RTLWIFI_DEBUG) += RTLWIFI_DEBUG
config-$(call config_package,rtl8xxxu) += RTL8XXXU
config-y += RTL8XXXU_UNTESTED
config-$(CONFIG_LEDS_TRIGGERS) += MAC80211_LEDS B43_LEDS B43LEGACY_LEDS
MAKE_OPTS:= -C "$(PKG_BUILD_DIR)" \
CROSS_COMPILE="$(KERNEL_CROSS)" \
ARCH="$(LINUX_KARCH)" \
EXTRA_CFLAGS="-I$(PKG_BUILD_DIR)/include $(IREMAP_CFLAGS)" \
KLIB_BUILD="$(LINUX_DIR)" \
MODPROBE=true \
KLIB=$(TARGET_MODULES_DIR) \
KERNEL_SUBLEVEL=$(lastword $(subst ., ,$(KERNEL_PATCHVER))) \
KBUILD_LDFLAGS_MODULE_PREREQ=
ifneq ($(findstring c,$(OPENWRT_VERBOSE)),)
MAKE_OPTS += V=1
endif
define ConfigVars
$(subst $(space),,$(foreach opt,$(config-$(1)),CPTCFG_$(opt)=$(1)
))
endef
define mac80211_config
$(call ConfigVars,m)$(call ConfigVars,y)
endef
$(eval $(call shexport,mac80211_config))
define Build/Prepare
rm -rf $(PKG_BUILD_DIR)
mkdir -p $(PKG_BUILD_DIR)
$(PKG_UNPACK)
$(Build/Patch)
$(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2100_NAME)-$(IPW2100_VERSION).tgz
$(TAR) -C $(PKG_BUILD_DIR) -xzf $(DL_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION).tgz
$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
rm -rf \
$(PKG_BUILD_DIR)/include/linux/ssb \
$(PKG_BUILD_DIR)/include/linux/bcma \
$(PKG_BUILD_DIR)/include/net/bluetooth
rm -f \
$(PKG_BUILD_DIR)/include/linux/cordic.h \
$(PKG_BUILD_DIR)/include/linux/crc8.h \
$(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h \
$(PKG_BUILD_DIR)/include/linux/wl12xx.h \
$(PKG_BUILD_DIR)/include/linux/spi/libertas_spi.h \
$(PKG_BUILD_DIR)/include/net/ieee80211.h \
$(PKG_BUILD_DIR)/backport-include/linux/bcm47xx_nvram.h
echo 'compat-wireless-$(PKG_VERSION)-$(PKG_RELEASE)-$(REVISION)' > $(PKG_BUILD_DIR)/compat_version
$(CP) ./files/regdb.txt $(PKG_BUILD_DIR)/net/wireless/db.txt
endef
ifneq ($(CONFIG_PACKAGE_kmod-cfg80211)$(CONFIG_PACKAGE_kmod-lib80211),)
define Build/Compile/kmod
rm -rf $(PKG_BUILD_DIR)/modules
+$(MAKE) $(PKG_JOBS) $(MAKE_OPTS) modules
endef
endif
define Build/Configure
cmp $(PKG_BUILD_DIR)/include/linux/ath9k_platform.h $(LINUX_DIR)/include/linux/ath9k_platform.h
cmp $(PKG_BUILD_DIR)/include/linux/ath5k_platform.h $(LINUX_DIR)/include/linux/ath5k_platform.h
cmp $(PKG_BUILD_DIR)/include/linux/rt2x00_platform.h $(LINUX_DIR)/include/linux/rt2x00_platform.h
endef
define Build/Compile
$(SH_FUNC) var2file "$(call shvar,mac80211_config)" $(PKG_BUILD_DIR)/.config
$(MAKE) $(MAKE_OPTS) allnoconfig
$(call Build/Compile/kmod)
endef
define Build/InstallDev
mkdir -p \
$(1)/usr/include/mac80211 \
$(1)/usr/include/mac80211-backport \
$(1)/usr/include/mac80211/ath \
$(1)/usr/include/net/mac80211
$(CP) $(PKG_BUILD_DIR)/net/mac80211/*.h $(PKG_BUILD_DIR)/include/* $(1)/usr/include/mac80211/
$(CP) $(PKG_BUILD_DIR)/backport-include/* $(1)/usr/include/mac80211-backport/
$(CP) $(PKG_BUILD_DIR)/net/mac80211/rate.h $(1)/usr/include/net/mac80211/
$(CP) $(PKG_BUILD_DIR)/drivers/net/wireless/ath/*.h $(1)/usr/include/mac80211/ath/
rm -f $(1)/usr/include/mac80211-backport/linux/module.h
endef
define KernelPackage/b43/install
rm -rf $(1)/lib/firmware/
ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
tar xzf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)"
else
tar xjf "$(DL_DIR)/$(PKG_B43_FWV4_SOURCE)" -C "$(PKG_BUILD_DIR)"
endif
$(INSTALL_DIR) $(1)/lib/firmware/
ifeq ($(CONFIG_B43_OPENFIRMWARE),y)
$(MAKE) -C "$(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/"
$(INSTALL_DIR) $(1)/lib/firmware/b43-open/
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/ucode5.fw $(1)/lib/firmware/b43-open/ucode5.fw
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0bsinitvals5.fw $(1)/lib/firmware/b43-open/b0g0bsinitvals5.fw
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)/b0g0initvals5.fw $(1)/lib/firmware/b43-open/b0g0initvals5.fw
else
b43-fwcutter -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_B43_FWV4_OBJECT)
endif
ifneq ($(CONFIG_B43_FW_SQUASH),)
b43-fwsquash.py "$(CONFIG_B43_FW_SQUASH_PHYTYPES)" "$(CONFIG_B43_FW_SQUASH_COREREVS)" "$(1)/lib/firmware/b43"
endif
endef
define KernelPackage/brcmsmac/install
$(INSTALL_DIR) $(1)/lib/firmware/brcm
ifeq ($(CONFIG_BRCMSMAC_USE_FW_FROM_WL),y)
tar xjf "$(DL_DIR)/$(PKG_BRCMSMAC_FW_SOURCE)" -C "$(PKG_BUILD_DIR)"
b43-fwcutter --brcmsmac -w $(1)/lib/firmware/ $(PKG_BUILD_DIR)/$(PKG_BRCMSMAC_FW_OBJECT)
endif
endef
define KernelPackage/cfg80211/install
$(INSTALL_DIR) $(1)/lib/wifi $(1)/lib/netifd/wireless
$(INSTALL_DATA) ./files/lib/wifi/mac80211.sh $(1)/lib/wifi
$(INSTALL_BIN) ./files/lib/netifd/wireless/mac80211.sh $(1)/lib/netifd/wireless
$(INSTALL_DIR) $(1)/etc/hotplug.d/ieee80211
$(INSTALL_DATA) ./files/mac80211.hotplug $(1)/etc/hotplug.d/ieee80211/00-wifi-detect
endef
define KernelPackage/ipw2100/install
$(INSTALL_DIR) $(1)/lib/firmware
$(INSTALL_DATA) $(PKG_BUILD_DIR)/ipw2100-$(IPW2100_VERSION)*.fw $(1)/lib/firmware
endef
define KernelPackage/ipw2200/install
$(INSTALL_DIR) $(1)/lib/firmware
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(IPW2200_NAME)-$(IPW2200_VERSION)/ipw2200*.fw $(1)/lib/firmware
endef
define KernelPackage/zd1211rw/install
$(INSTALL_DIR) $(1)/lib/firmware/zd1211
$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(ZD1211FW_NAME)/zd1211* $(1)/lib/firmware/zd1211
endef
$(eval $(call KernelPackage,adm8211))
$(eval $(call KernelPackage,airo))
$(eval $(call KernelPackage,ath))
$(eval $(call KernelPackage,ath10k))
$(eval $(call KernelPackage,ath5k))
$(eval $(call KernelPackage,ath9k))
$(eval $(call KernelPackage,ath9k-common))
$(eval $(call KernelPackage,ath9k-htc))
$(eval $(call KernelPackage,b43))
$(eval $(call KernelPackage,b43legacy))
$(eval $(call KernelPackage,brcmsmac))
$(eval $(call KernelPackage,brcmfmac))
$(eval $(call KernelPackage,brcmutil))
$(eval $(call KernelPackage,carl9170))
$(eval $(call KernelPackage,cfg80211))
$(eval $(call KernelPackage,hermes))
$(eval $(call KernelPackage,hermes-pci))
$(eval $(call KernelPackage,hermes-plx))
$(eval $(call KernelPackage,hermes-pcmcia))
$(eval $(call KernelPackage,iwlwifi))
$(eval $(call KernelPackage,iwl-legacy))
$(eval $(call KernelPackage,iwl4965))
$(eval $(call KernelPackage,iwl3945))
$(eval $(call KernelPackage,lib80211))
$(eval $(call KernelPackage,libertas-usb))
$(eval $(call KernelPackage,libertas-sdio))
$(eval $(call KernelPackage,libertas-spi))
$(eval $(call KernelPackage,libipw))
$(eval $(call KernelPackage,ipw2100))
$(eval $(call KernelPackage,ipw2200))
$(eval $(call KernelPackage,mac80211))
$(eval $(call KernelPackage,mac80211-hwsim))
$(eval $(call KernelPackage,mt7601u))
$(eval $(call KernelPackage,mwl8k))
$(eval $(call KernelPackage,mwifiex-pcie))
$(eval $(call KernelPackage,mwifiex-sdio))
$(eval $(call KernelPackage,p54-common))
$(eval $(call KernelPackage,p54-pci))
$(eval $(call KernelPackage,p54-usb))
$(eval $(call KernelPackage,p54-spi))
$(eval $(call KernelPackage,rt2x00-lib))
$(eval $(call KernelPackage,rt2x00-mmio))
$(eval $(call KernelPackage,rt2x00-pci))
$(eval $(call KernelPackage,rt2x00-usb))
$(eval $(call KernelPackage,rt2800-lib))
$(eval $(call KernelPackage,rt2400-pci))
$(eval $(call KernelPackage,rt2500-pci))
$(eval $(call KernelPackage,rt2500-usb))
$(eval $(call KernelPackage,rt2800-mmio))
$(eval $(call KernelPackage,rt2800-soc))
$(eval $(call KernelPackage,rt2800-pci))
$(eval $(call KernelPackage,rt2800-usb))
$(eval $(call KernelPackage,rt61-pci))
$(eval $(call KernelPackage,rt73-usb))
$(eval $(call KernelPackage,rtl8180))
$(eval $(call KernelPackage,rtl8187))
$(eval $(call KernelPackage,rtlwifi))
$(eval $(call KernelPackage,rtlwifi-pci))
$(eval $(call KernelPackage,rtlwifi-usb))
$(eval $(call KernelPackage,rtl8192c-common))
$(eval $(call KernelPackage,rtl8192ce))
$(eval $(call KernelPackage,rtl8192se))
$(eval $(call KernelPackage,rtl8192de))
$(eval $(call KernelPackage,rtl8192cu))
$(eval $(call KernelPackage,rtl8xxxu))
$(eval $(call KernelPackage,wlcore))
$(eval $(call KernelPackage,wl12xx))
$(eval $(call KernelPackage,wl18xx))
$(eval $(call KernelPackage,zd1211rw))
Reference in New Issue View Git Blame Copy Permalink