ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-26 17:01:14 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
7306b9e810
openwrt/target/linux/mediatek/patches-5.4/0600-net-phylink-propagate-resolved-link-config-via-mac_l.patch
Hauke Mehrtens 14940aee45 kernel: bump 5.4 to 5.4.163 
Removed upstreamed:
 target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch
 target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch
 target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch
 target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch
 target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch

The following patch does not apply to upstream any more and needs some
more work to make it work fully again. I am not sure if we are still
able to set the UART to a none standard baud rate.
 target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch

These patches needed manually changes:
  target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch
  target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch
  target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch
  target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch
  target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch

All others updated automatically.

Compile-tested on: malta/le, armvirt/64, lantiq/xrx200
Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-12-12 20:08:17 +01:00

247 lines
10 KiB
Diff
Raw Blame History

From: Russell King <rmk+kernel@armlinux.org.uk>
Date: Wed, 26 Feb 2020 10:23:41 +0000
Subject: [PATCH] net: phylink: propagate resolved link config via
mac_link_up()
Propagate the resolved link parameters via the mac_link_up() call for
MACs that do not automatically track their PCS state. We propagate the
link parameters via function arguments so that inappropriate members
of struct phylink_link_state can't be accessed, and creating a new
structure just for this adds needless complexity to the API.
Tested-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
--- a/Documentation/networking/sfp-phylink.rst
+++ b/Documentation/networking/sfp-phylink.rst
@@ -74,10 +74,13 @@ phylib to the sfp/phylink support. Plea
this documentation.
1. Optionally split the network driver's phylib update function into
- three parts dealing with link-down, link-up and reconfiguring the
- MAC settings. This can be done as a separate preparation commit.
+ two parts dealing with link-down and link-up. This can be done as
+ a separate preparation commit.
- An example of this preparation can be found in git commit fc548b991fb0.
+ An older example of this preparation can be found in git commit
+ fc548b991fb0, although this was splitting into three parts; the
+ link-up part now includes configuring the MAC for the link settings.
+ Please see :c:func:`mac_link_up` for more information on this.
2. Replace::
@@ -207,6 +210,14 @@ this documentation.
using. This is particularly important for in-band negotiation
methods such as 1000base-X and SGMII.
+ The :c:func:`mac_link_up` method is used to inform the MAC that the
+ link has come up. The call includes the negotiation mode and interface
+ for reference only. The finalised link parameters are also supplied
+ (speed, duplex and flow control/pause enablement settings) which
+ should be used to configure the MAC when the MAC and PCS are not
+ tightly integrated, or when the settings are not coming from in-band
+ negotiation.
+
The :c:func:`mac_config` method is used to update the MAC with the
requested state, and must avoid unnecessarily taking the link down
when making changes to the MAC configuration. This means the
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3655,9 +3655,11 @@ static void mvneta_mac_link_down(struct
mvneta_set_eee(pp, false);
}
-static void mvneta_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy)
+static void mvneta_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct net_device *ndev = to_net_dev(config->dev);
struct mvneta_port *pp = netdev_priv(ndev);
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -58,8 +58,11 @@ static struct {
*/
static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode,
const struct phylink_link_state *state);
-static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface, struct phy_device *phy);
+static void mvpp2_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause);
/* Queue modes */
#define MVPP2_QDIST_SINGLE_MODE 0
@@ -3468,8 +3471,9 @@ static void mvpp2_start_dev(struct mvpp2
.interface = port->phy_interface,
};
mvpp2_mac_config(&port->phylink_config, MLO_AN_INBAND, &state);
- mvpp2_mac_link_up(&port->phylink_config, MLO_AN_INBAND,
- port->phy_interface, NULL);
+ mvpp2_mac_link_up(&port->phylink_config, NULL,
+ MLO_AN_INBAND, port->phy_interface,
+ SPEED_UNKNOWN, DUPLEX_UNKNOWN, false, false);
}
netif_tx_start_all_queues(port->dev);
@@ -5125,8 +5129,11 @@ static void mvpp2_mac_config(struct phyl
mvpp2_port_enable(port);
}
-static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface, struct phy_device *phy)
+static void mvpp2_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct mvpp2_port *port = mvpp2_phylink_to_port(config);
u32 val;
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -449,9 +449,10 @@ static void mtk_mac_link_down(struct phy
mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
}
-static void mtk_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy)
+static void mtk_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex, bool tx_pause, bool rx_pause)
{
struct mtk_mac *mac = container_of(config, struct mtk_mac,
phylink_config);
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -925,8 +925,10 @@ static void stmmac_mac_link_down(struct
}
static void stmmac_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
unsigned int mode, phy_interface_t interface,
- struct phy_device *phy)
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -1499,9 +1499,10 @@ static void axienet_mac_link_down(struct
}
static void axienet_mac_link_up(struct phylink_config *config,
- unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy)
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
/* nothing meaningful to do */
}
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -447,8 +447,11 @@ static void phylink_mac_link_up(struct p
struct net_device *ndev = pl->netdev;
pl->cur_interface = link_state.interface;
- pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode,
- pl->cur_interface, pl->phydev);
+ pl->ops->mac_link_up(pl->config, pl->phydev,
+ pl->cur_link_an_mode, pl->cur_interface,
+ link_state.speed, link_state.duplex,
+ !!(link_state.pause & MLO_PAUSE_TX),
+ !!(link_state.pause & MLO_PAUSE_RX));
if (ndev)
netif_carrier_on(ndev);
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -91,9 +91,10 @@ struct phylink_mac_ops {
void (*mac_an_restart)(struct phylink_config *config);
void (*mac_link_down)(struct phylink_config *config, unsigned int mode,
phy_interface_t interface);
- void (*mac_link_up)(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy);
+ void (*mac_link_up)(struct phylink_config *config,
+ struct phy_device *phy, unsigned int mode,
+ phy_interface_t interface, int speed, int duplex,
+ bool tx_pause, bool rx_pause);
};
#if 0 /* For kernel-doc purposes only. */
@@ -217,19 +218,34 @@ void mac_link_down(struct phylink_config
/**
* mac_link_up() - allow the link to come up
* @config: a pointer to a &struct phylink_config.
+ * @phy: any attached phy
* @mode: link autonegotiation mode
* @interface: link &typedef phy_interface_t mode
- * @phy: any attached phy
+ * @speed: link speed
+ * @duplex: link duplex
+ * @tx_pause: link transmit pause enablement status
+ * @rx_pause: link receive pause enablement status
+ *
+ * Configure the MAC for an established link.
+ *
+ * @speed, @duplex, @tx_pause and @rx_pause indicate the finalised link
+ * settings, and should be used to configure the MAC block appropriately
+ * where these settings are not automatically conveyed from the PCS block,
+ * or if in-band negotiation (as defined by phylink_autoneg_inband(@mode))
+ * is disabled.
+ *
+ * Note that when 802.3z in-band negotiation is in use, it is possible
+ * that the user wishes to override the pause settings, and this should
+ * be allowed when considering the implementation of this method.
*
- * If @mode is not an in-band negotiation mode (as defined by
- * phylink_autoneg_inband()), allow the link to come up. If @phy
- * is non-%NULL, configure Energy Efficient Ethernet by calling
+ * If in-band negotiation mode is disabled, allow the link to come up. If
+ * @phy is non-%NULL, configure Energy Efficient Ethernet by calling
* phy_init_eee() and perform appropriate MAC configuration for EEE.
* Interface type selection must be done in mac_config().
*/
-void mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy);
+void mac_link_up(struct phylink_config *config, struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex, bool tx_pause, bool rx_pause);
#endif
struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -529,9 +529,11 @@ void dsa_port_phylink_mac_link_down(stru
EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_link_down);
void dsa_port_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
unsigned int mode,
phy_interface_t interface,
- struct phy_device *phydev)
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
struct dsa_switch *ds = dp->ds;
Reference in New Issue View Git Blame Copy Permalink