mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 05:38:00 +00:00
d22fb7f4fd
The patch adds support for the TP-Link Archer C6 v3 (FCC ID TE7A6V3) The patch adds identification changes to the existing TP-Link Archer A6, by Vinay Patil <post2vinay@gmail.com>, which has identical hardware. Specification ------------- MediaTek MT7621 SOC RAM: 128MB DDR3 SPI Flash: W25Q128 (16MB) Ethernet: MT7530 5x 1000Base-T WiFi 5GHz: Mediatek MT7613BE WiFi 2.4GHz: Mediatek MT7603E UART/Serial: 115200 8n1 Device Configuration & Serial Port Pins --------------------------------------- ETH Ports: LAN4 LAN3 LAN2 LAN1 WAN _______________________ | | Serial Pins: | VCC GND TXD RXD | |_____________________| LEDs: Power Wifi2G Wifi5G LAN WAN Build Output ------------ The build will generate following set of files [1] openwrt-ramips-mt7621-tplink_archer-c6-v3-initramfs-kernel.bin [2] openwrt-ramips-mt7621-tplink_archer-c6-v3-squashfs-factory.bin [3] openwrt-ramips-mt7621-tplink_archer-c6-v3-squashfs-sysupgrade.bin How to Use - Flashing from TP-Link Web Interface ------------------------------------------------ * Go to "Advanced/System Tools/Firmware Update". * Click "Browse" and upload the OpenWrt factory image: factory.bin[2] * Click the "Upgrade" button, and select "Yes" when prompted. TFTP Booting ------------ Setup a TFTP boot server with address 192.168.0.5. While starting U-boot press '4' key to stop autoboot. Copy the initramfs-kernel.bin[1] to TFTP server folder, rename as test.bin From u-boot command prompt run tftpboot followed by bootm. Recovery -------- Archer A6 V3 has recovery page activated if SPI booting from flash fails. Recovery page can be activated by powercycling the router four times before the boot process is complete. Note: TFTP boot can be activated only from u-boot serial console. Device recovery address: 192.168.0.1 Signed-off-by: Amish Vishwakarma <vishwakarma.amish@gmail.com> [fix indent] Signed-off-by: David Bauer <mail@david-bauer.net> |
||
---|---|---|
.. | ||
autoconf | ||
autoconf-archive | ||
automake | ||
b43-tools | ||
bc | ||
bison | ||
cbootimage | ||
cbootimage-configs | ||
ccache | ||
cmake | ||
coreutils | ||
cpio | ||
dosfstools | ||
e2fsprogs | ||
elftosb | ||
expat | ||
fakeroot | ||
findutils | ||
firmware-utils | ||
flex | ||
flock | ||
genext2fs | ||
gengetopt | ||
gmp | ||
include | ||
isl | ||
kernel2minor | ||
libressl | ||
libtool | ||
lzma | ||
lzma-old | ||
m4 | ||
make-ext4fs | ||
missing-macros | ||
mkimage | ||
mklibs | ||
mm-macros | ||
mpc | ||
mpfr | ||
mtd-utils | ||
mtools | ||
ninja | ||
padjffs2 | ||
patch | ||
patch-image | ||
patchelf | ||
pkgconf | ||
quilt | ||
sdimage | ||
sed | ||
sparse | ||
squashfs | ||
squashfskit4 | ||
sstrip | ||
tar | ||
xxd | ||
xz | ||
zip | ||
zlib | ||
zstd | ||
Makefile |