John Crispin 72822d0192 lantiq: Use platform endianness when accessing dwc2 registers ... This patch switches calls to readl/writel to their dwc2_readl/dwc2_writel equivalents which preserve platform endianness. This patch is necessary to access dwc2 registers correctly on big endian systems such as the mips based SoCs made by Lantiq. Then dwc2 can be used to replace ifx-hcd driver for Lantiq platforms found e.g. in OpenWrt. The patch was autogenerated with the following commands: $EDITOR core.h sed -i "s/\<readl\>/dwc2_readl/g" *.c hcd.h hw.h sed -i "s/\<writel\>/dwc2_writel/g" *.c hcd.h hw.h Signed-off-by: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> SVN-Revision: 44675		2015-03-11 17:08:26 +00:00
..
base-files	lantiq: td-w8970: fix failsafe mode	2015-02-09 12:14:48 +00:00
dts	lantiq: fix DGN3500 root device	2015-02-13 07:29:17 +00:00
falcon	build: unify mips target cflags	2013-09-26 17:53:14 +00:00
files/firmware/lantiq	move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: fix VG3503J partition table for newer kernels	2015-02-11 10:17:38 +00:00
patches-3.14	lantiq: disable buffered writes on Intel command set flash	2015-02-14 20:48:32 +00:00
patches-3.18	lantiq: Use platform endianness when accessing dwc2 registers	2015-03-11 17:08:26 +00:00
xrx200	kernel: move KERNFS to generic config	2015-03-06 07:56:47 +00:00
xway	kernel: move KERNFS to generic config	2015-03-06 07:56:47 +00:00
base-files.mk	lantiq: add runtime generation of /etc/config/network	2011-11-15 18:21:00 +00:00
config-3.14	lantiq: update to 3.14	2014-08-18 13:09:30 +00:00
config-3.18	kernel: move CONFIG_MIPS_O32_FP64_SUPPORT to generic configs	2015-03-01 11:37:15 +00:00
Makefile	lantiq: add 3.18 support	2015-02-09 12:13:25 +00:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00