Martin Blumenstingl 32c9d467e3 lantiq: fix patching the wifi mac address on BTHOMEHUBV3A ... The firmware hotplug script tries to read the mac address from a partition with the name "uboot-env" which does not exist (instead it's name is uboot_env). This broke calculation of the new checksum (after patching the mac address) which resulted in ath9k refusing to use the EEPROM data. The original error reported by ath9k was: PCI: Enabling device 0000:00:0e.0 (0000 -> 0002) ath: phy0: Bad EEPROM checksum 0x2523 ath: phy0: Unable to initialize hardware; initialization status: -22 ath9k 0000:00:0e.0: Failed to initialize device Fixes: a20616863d ("lantiq: use ath9k device tree bindings binding/owl-loader") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>		2017-02-13 07:57:04 +01:00
..
base-files	lantiq: fix patching the wifi mac address on BTHOMEHUBV3A	2017-02-13 07:57:04 +01:00
dts	lantiq: update USB controller initialization	2017-01-09 23:25:34 +01:00
falcon	build: remove mips16 feature flag from target makefiles	2017-01-24 13:35:45 +01:00
files/firmware/lantiq	move GPHY FW blobs to non versioned folder	2013-03-14 18:42:21 +00:00
image	lantiq: fix brnImage signature for the VGV7510KW22BRN images	2017-01-28 12:44:35 +01:00
patches-4.4	lantiq: fix unaligned access in xrx200_poll_rx()	2017-01-30 10:15:33 +01:00
xrx200	build: remove mips16 feature flag from target makefiles	2017-01-24 13:35:45 +01:00
xway	build: remove mips16 feature flag from target makefiles	2017-01-24 13:35:45 +01:00
xway_legacy	build: remove mips16 feature flag from target makefiles	2017-01-24 13:35:45 +01:00
config-4.4	lantiq: add cpu temperatur sensor driver for xrx200	2016-08-03 15:30:13 +02:00
Makefile	lantiq: remove CPU_TYPE:=mips32r2, it gets overwritten anyway	2017-01-24 13:35:47 +01:00
modules.mk	fix i2c-lantiq module	2012-12-16 10:03:18 +00:00