openwrt/target/linux/ramips/dts/mt7621_iptime_a3004ns-dual.dts
Shiji Yang 2c02a9b9e4
ramips: convert MT7610 and MT7612 EEPROM to NVMEM format for MT7621
This patch converts MT7610 and MT7612 WiFi calibration data to NVMEM
format. The EEPROM size is 0x200.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00

198 lines
3.1 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "iptime,a3004ns-dual", "mediatek,mt7621-soc";
model = "ipTIME A3004NS-dual";
aliases {
led-boot = &led_cpu;
led-failsafe = &led_cpu;
led-running = &led_cpu;
led-upgrade = &led_cpu;
};
leds {
compatible = "gpio-leds";
led_cpu: cpu {
label = "blue:cpu";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
usb {
label = "blue:usb";
gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
trigger-sources = <&xhci_ehci_port1>;
linux,default-trigger = "usbport";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
compatible = "nvmem-cells";
label = "u-boot";
reg = <0x0 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
macaddr_uboot_1fc20: macaddr@1fc20 {
reg = <0x1fc20 0x6>;
};
macaddr_uboot_1fc40: macaddr@1fc40 {
reg = <0x1fc40 0x6>;
};
};
partition@20000 {
label = "config";
reg = <0x20000 0x10000>;
read-only;
};
factory: partition@30000 {
compatible = "nvmem-cells";
label = "factory";
reg = <0x30000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x200>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x200>;
};
};
partition@40000 {
label = "firmware";
reg = <0x40000 0xfc0000>;
compatible = "denx,uimage";
};
};
};
};
&gmac0 {
nvmem-cells = <&macaddr_uboot_1fc20>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_uboot_1fc40>;
nvmem-cell-names = "mac-address";
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan1";
};
port@2 {
status = "okay";
label = "lan2";
};
port@3 {
status = "okay";
label = "lan3";
};
port@4 {
status = "okay";
label = "lan4";
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <5000000 6000000>;
led {
led-sources = <2>;
led-active-low;
};
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
ieee80211-freq-limit = <2400000 2500000>;
led {
led-sources = <2>;
led-active-low;
};
};
};
&state_default {
gpio {
groups = "wdt", "i2c", "uart3";
function = "gpio";
};
};