openwrt/target/linux/ramips/dts/mt7621_arcadyan_we420223-99.dts
Shiji Yang 65cd6a6fec
ramips: convert MT7613 and MT7615 EEPROM to NVMEM format for MT7621
This patch converts MT7613 and MT7615 WiFi calibration data to NVMEM
format. The EEPROM size is 0x4da8.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2023-10-09 11:15:52 +02:00

228 lines
3.9 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
model = "Arcadyan WE420223-99";
compatible = "arcadyan,we420223-99", "mediatek,mt7621-soc";
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_wps_green;
led-wifi = &led_wifi_green;
};
chosen {
bootargs = "console=ttyS0,57600 ubi.mtd=5 root=/dev/ubiblock0_0";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_power_green: power_green {
label = "green:power";
gpios = <&gpio 42 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_POWER;
default-state = "on";
};
led_power_red: power_red {
label = "red:power";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_FAULT;
};
led_wifi_blue: wifi_blue {
label = "blue:wifi";
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
};
led_wifi_green: wifi_green {
label = "green:wifi";
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WLAN;
};
led_wps_red: wps_red {
label = "red:wps";
gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_RED>;
function = LED_FUNCTION_WPS;
};
led_wps_green: wps_green {
label = "green:wps";
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_WPS;
};
led_followme_r: followme_red {
label = "red:followme";
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_RED>;
};
led_followme_g: followme_green {
label = "green:followme";
gpios = <&gpio 48 GPIO_ACTIVE_LOW>;
color = <LED_COLOR_ID_GREEN>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <70000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "ALL";
reg = <0x0 0x2000000>;
read-only;
};
partition@1 {
label = "Bootloader";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "Config";
reg = <0x30000 0x10000>;
};
factory: partition@40000 {
compatible = "nvmem-cells";
label = "Factory";
reg = <0x40000 0x10000>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x4da8>;
};
};
partition@50000 {
label = "kernel";
reg = <0x50000 0x1f60000>;
};
partition@490000 {
label = "rootfs";
reg = <0x490000 0x1b20000>;
};
partition@1000000 {
label = "Kernel2";
reg = <0x1000000 0xfb0000>;
};
partition@1440000 {
label = "RootFS2";
reg = <0x1440000 0xb70000>;
};
partition@1fb0000 {
label = "glbcfg";
reg = <0x1fb0000 0x10000>;
read-only;
};
partition@1fc0000 {
label = "board_data";
reg = <0x1fc0000 0x10000>;
read-only;
};
partition@1fd0000 {
label = "glbcfg2";
reg = <0x1fd0000 0x10000>;
read-only;
};
partition@1fe0000 {
label = "board_data2";
reg = <0x1fe0000 0x10000>;
read-only;
};
};
};
};
&xhci {
status = "disabled";
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "swp1";
};
};
};
&gmac1 {
status = "okay";
label = "swp0";
phy-handle = <&ethphy0>;
};
&mdio {
ethphy0: ethernet-phy@0 {
reg = <0>;
};
};
&pcie {
status = "okay";
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
};