openwrt/target/linux/ramips/dts/mt7621_xzwifi_creativebox-v1.dts
Chuanhong Guo a2c19f1d2f ramips: dts: drop memory nodes
mt7621 and mt7628 now have the ability to detect memory size
automatically.
Drop memory nodes and let kernel determine memory size.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2019-07-11 22:11:21 +08:00

168 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "xzwifi,creativebox-v1", "mediatek,mt7621-soc";
model = "CreativeBox v1";
aliases {
led-boot = &led_sys;
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
};
chosen {
bootargs = "console=ttyS0,115200";
};
leds {
compatible = "gpio-leds";
power {
label = "creativebox-v1:blue:power";
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led_sys: sys {
label = "creativebox-v1:blue:sys";
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
internet {
label = "creativebox-v1:blue:internet";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "creativebox-v1:blue:wlan2g";
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "creativebox-v1:blue:wlan5g";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
power_usb2 {
gpio-export,name = "power_usb2";
gpio-export,output = <1>;
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
power_usb3 {
gpio-export,name = "power_usb3";
gpio-export,output = <1>;
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
};
power_sata {
gpio-export,name = "power_sata";
gpio-export,output = <1>;
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x1fb0000>;
};
};
};
};
&sdhci {
status = "okay";
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "pci1400,7603";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
&pcie1 {
wifi@0,0 {
compatible = "pci14c3,7662";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt", "rgmii2";
ralink,function = "gpio";
};
};
};