Adrian Schmutzler 869a0183b9 ramips: fix MAC address setup for Newifi Y1 and Y1S ... So far, MAC address setup for those devices has been using local addresses although additional MAC addresses are available on flash. On device, we found the following situation: position Y1 Y1S 0x4 *:d4 *:e4 0x8004 *:d6 *:e8 0x28 *:d4 *:e4 0x2e *:d7 *:eb Since 0x4 and 0x28 yield the same address, the former was set for &ethernet in DTS. However, the typical location on this architecture is 0x28, so this patch changes that. For further setup in 02_network, the local bit for lan_mac is removed, so the address from &ethernet is used at all. For wan_mac, instead of calculating an address with local bit set, this patch exploits the previously unused address in 0x2e. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2019-09-07 21:41:44 +08:00
..
board.d	ramips: fix MAC address setup for Newifi Y1 and Y1S	2019-09-07 21:41:44 +08:00
hotplug.d	treewide: convert WiFi caldata size and offset to hexadecimal	2019-08-14 12:36:37 +02:00
init.d	ramips: improve support for Xiaomi Miwifi Nano	2019-09-04 19:26:01 +08:00
uci-defaults	ramips: fix LED labels not updated during device name changes	2019-08-10 00:32:28 +02:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00