mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
807366af38
This patch has been backported to stable kernel 5.4 already. Remove our local patch explicitly now, as by applying the patch (or refreshing) the relevant code is actually added a second time. Refresh remaining patches as well. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
286 lines
8.0 KiB
Diff
286 lines
8.0 KiB
Diff
From: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Bcc: linux@mail.armlinux.org.uk
|
|
Subject: [PATCH 7/7] i2c: pxa: implement generic i2c bus recovery
|
|
MIME-Version: 1.0
|
|
Content-Disposition: inline
|
|
Content-Transfer-Encoding: 8bit
|
|
Content-Type: text/plain; charset="utf-8"
|
|
|
|
Implement generic GPIO-based I2C bus recovery for the PXA I2C driver.
|
|
|
|
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
---
|
|
drivers/i2c/busses/i2c-pxa.c | 176 +++++++++++++++++++++++++++++++----
|
|
1 file changed, 159 insertions(+), 17 deletions(-)
|
|
|
|
--- a/drivers/i2c/busses/i2c-pxa.c
|
|
+++ b/drivers/i2c/busses/i2c-pxa.c
|
|
@@ -20,6 +20,7 @@
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
+#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-pxa.h>
|
|
#include <linux/init.h>
|
|
@@ -29,6 +30,7 @@
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
+#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/platform_data/i2c-pxa.h>
|
|
#include <linux/slab.h>
|
|
@@ -261,6 +263,11 @@ struct pxa_i2c {
|
|
bool highmode_enter;
|
|
u32 fm_mask;
|
|
u32 hs_mask;
|
|
+
|
|
+ struct i2c_bus_recovery_info recovery;
|
|
+ struct pinctrl *pinctrl;
|
|
+ struct pinctrl_state *pinctrl_default;
|
|
+ struct pinctrl_state *pinctrl_recovery;
|
|
};
|
|
|
|
#define _IBMR(i2c) ((i2c)->reg_ibmr)
|
|
@@ -560,13 +567,8 @@ static void i2c_pxa_set_slave(struct pxa
|
|
#define i2c_pxa_set_slave(i2c, err) do { } while (0)
|
|
#endif
|
|
|
|
-static void i2c_pxa_reset(struct pxa_i2c *i2c)
|
|
+static void i2c_pxa_do_reset(struct pxa_i2c *i2c)
|
|
{
|
|
- pr_debug("Resetting I2C Controller Unit\n");
|
|
-
|
|
- /* abort any transfer currently under way */
|
|
- i2c_pxa_abort(i2c);
|
|
-
|
|
/* reset according to 9.8 */
|
|
writel(ICR_UR, _ICR(i2c));
|
|
writel(I2C_ISR_INIT, _ISR(i2c));
|
|
@@ -585,12 +587,25 @@ static void i2c_pxa_reset(struct pxa_i2c
|
|
#endif
|
|
|
|
i2c_pxa_set_slave(i2c, 0);
|
|
+}
|
|
|
|
+static void i2c_pxa_enable(struct pxa_i2c *i2c)
|
|
+{
|
|
/* enable unit */
|
|
writel(readl(_ICR(i2c)) | ICR_IUE, _ICR(i2c));
|
|
udelay(100);
|
|
}
|
|
|
|
+static void i2c_pxa_reset(struct pxa_i2c *i2c)
|
|
+{
|
|
+ pr_debug("Resetting I2C Controller Unit\n");
|
|
+
|
|
+ /* abort any transfer currently under way */
|
|
+ i2c_pxa_abort(i2c);
|
|
+ i2c_pxa_do_reset(i2c);
|
|
+ i2c_pxa_enable(i2c);
|
|
+}
|
|
+
|
|
|
|
#ifdef CONFIG_I2C_PXA_SLAVE
|
|
/*
|
|
@@ -1002,6 +1017,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2
|
|
ret = i2c_pxa_wait_bus_not_busy(i2c);
|
|
if (ret) {
|
|
dev_err(&i2c->adap.dev, "i2c_pxa: timeout waiting for bus free\n");
|
|
+ i2c_recover_bus(&i2c->adap);
|
|
goto out;
|
|
}
|
|
|
|
@@ -1047,6 +1063,7 @@ static int i2c_pxa_do_xfer(struct pxa_i2
|
|
|
|
if (!timeout && i2c->msg_num) {
|
|
i2c_pxa_scream_blue_murder(i2c, "timeout with active message");
|
|
+ i2c_recover_bus(&i2c->adap);
|
|
ret = I2C_RETRY;
|
|
}
|
|
|
|
@@ -1228,6 +1245,129 @@ static int i2c_pxa_probe_pdata(struct pl
|
|
return 0;
|
|
}
|
|
|
|
+static void i2c_pxa_prepare_recovery(struct i2c_adapter *adap)
|
|
+{
|
|
+ struct pxa_i2c *i2c = adap->algo_data;
|
|
+ u32 ibmr = readl(_IBMR(i2c));
|
|
+
|
|
+ /*
|
|
+ * Program the GPIOs to reflect the current I2C bus state while
|
|
+ * we transition to recovery; this avoids glitching the bus.
|
|
+ */
|
|
+ gpiod_set_value(i2c->recovery.scl_gpiod, ibmr & IBMR_SCLS);
|
|
+ gpiod_set_value(i2c->recovery.sda_gpiod, ibmr & IBMR_SDAS);
|
|
+
|
|
+ WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery));
|
|
+}
|
|
+
|
|
+static void i2c_pxa_unprepare_recovery(struct i2c_adapter *adap)
|
|
+{
|
|
+ struct pxa_i2c *i2c = adap->algo_data;
|
|
+ u32 isr;
|
|
+
|
|
+ /*
|
|
+ * The bus should now be free. Clear up the I2C controller before
|
|
+ * handing control of the bus back to avoid the bus changing state.
|
|
+ */
|
|
+ isr = readl(_ISR(i2c));
|
|
+ if (isr & (ISR_UB | ISR_IBB)) {
|
|
+ dev_dbg(&i2c->adap.dev,
|
|
+ "recovery: resetting controller, ISR=0x%08x\n", isr);
|
|
+ i2c_pxa_do_reset(i2c);
|
|
+ }
|
|
+
|
|
+ WARN_ON(pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default));
|
|
+
|
|
+ dev_dbg(&i2c->adap.dev, "recovery: IBMR 0x%08x ISR 0x%08x\n",
|
|
+ readl(_IBMR(i2c)), readl(_ISR(i2c)));
|
|
+
|
|
+ i2c_pxa_enable(i2c);
|
|
+}
|
|
+
|
|
+static int i2c_pxa_init_recovery(struct pxa_i2c *i2c)
|
|
+{
|
|
+ struct i2c_bus_recovery_info *bri = &i2c->recovery;
|
|
+ struct device *dev = i2c->adap.dev.parent;
|
|
+
|
|
+ /*
|
|
+ * When slave mode is enabled, we are not the only master on the bus.
|
|
+ * Bus recovery can only be performed when we are the master, which
|
|
+ * we can't be certain of. Therefore, when slave mode is enabled, do
|
|
+ * not configure bus recovery.
|
|
+ */
|
|
+ if (IS_ENABLED(CONFIG_I2C_PXA_SLAVE))
|
|
+ return 0;
|
|
+
|
|
+ i2c->pinctrl = devm_pinctrl_get(dev);
|
|
+ if (IS_ERR(i2c->pinctrl))
|
|
+ return PTR_ERR(i2c->pinctrl);
|
|
+
|
|
+ if (!i2c->pinctrl)
|
|
+ return 0;
|
|
+
|
|
+ i2c->pinctrl_default = pinctrl_lookup_state(i2c->pinctrl,
|
|
+ PINCTRL_STATE_DEFAULT);
|
|
+ i2c->pinctrl_recovery = pinctrl_lookup_state(i2c->pinctrl, "recovery");
|
|
+
|
|
+ if (IS_ERR(i2c->pinctrl_default) || IS_ERR(i2c->pinctrl_recovery)) {
|
|
+ dev_info(dev, "missing pinmux recovery information: %ld %ld\n",
|
|
+ PTR_ERR(i2c->pinctrl_default),
|
|
+ PTR_ERR(i2c->pinctrl_recovery));
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * Claiming GPIOs can influence the pinmux state, and may glitch the
|
|
+ * I2C bus. Do this carefully.
|
|
+ */
|
|
+ bri->scl_gpiod = devm_gpiod_get(dev, "scl", GPIOD_OUT_HIGH_OPEN_DRAIN);
|
|
+ if (bri->scl_gpiod == ERR_PTR(-EPROBE_DEFER))
|
|
+ return -EPROBE_DEFER;
|
|
+ if (IS_ERR(bri->scl_gpiod)) {
|
|
+ dev_info(dev, "missing scl gpio recovery information: %pe\n",
|
|
+ bri->scl_gpiod);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ /*
|
|
+ * We have SCL. Pull SCL low and wait a bit so that SDA glitches
|
|
+ * have no effect.
|
|
+ */
|
|
+ gpiod_direction_output(bri->scl_gpiod, 0);
|
|
+ udelay(10);
|
|
+ bri->sda_gpiod = devm_gpiod_get(dev, "sda", GPIOD_OUT_HIGH_OPEN_DRAIN);
|
|
+
|
|
+ /* Wait a bit in case of a SDA glitch, and then release SCL. */
|
|
+ udelay(10);
|
|
+ gpiod_direction_output(bri->scl_gpiod, 1);
|
|
+
|
|
+ if (bri->sda_gpiod == ERR_PTR(-EPROBE_DEFER))
|
|
+ return -EPROBE_DEFER;
|
|
+
|
|
+ if (IS_ERR(bri->sda_gpiod)) {
|
|
+ dev_info(dev, "missing sda gpio recovery information: %pe\n",
|
|
+ bri->sda_gpiod);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ bri->prepare_recovery = i2c_pxa_prepare_recovery;
|
|
+ bri->unprepare_recovery = i2c_pxa_unprepare_recovery;
|
|
+ bri->recover_bus = i2c_generic_scl_recovery;
|
|
+
|
|
+ i2c->adap.bus_recovery_info = bri;
|
|
+
|
|
+ /*
|
|
+ * Claiming GPIOs can change the pinmux state, which confuses the
|
|
+ * pinctrl since pinctrl's idea of the current setting is unaffected
|
|
+ * by the pinmux change caused by claiming the GPIO. Work around that
|
|
+ * by switching pinctrl to the GPIO state here. We do it this way to
|
|
+ * avoid glitching the I2C bus.
|
|
+ */
|
|
+ pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_recovery);
|
|
+
|
|
+ return pinctrl_select_state(i2c->pinctrl, i2c->pinctrl_default);
|
|
+}
|
|
+
|
|
static int i2c_pxa_probe(struct platform_device *dev)
|
|
{
|
|
struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev);
|
|
@@ -1240,6 +1380,16 @@ static int i2c_pxa_probe(struct platform
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
+ /* Default adapter num to device id; i2c_pxa_probe_dt can override. */
|
|
+ i2c->adap.nr = dev->id;
|
|
+ i2c->adap.owner = THIS_MODULE;
|
|
+ i2c->adap.retries = 5;
|
|
+ i2c->adap.algo_data = i2c;
|
|
+ i2c->adap.dev.parent = &dev->dev;
|
|
+#ifdef CONFIG_OF
|
|
+ i2c->adap.dev.of_node = dev->dev.of_node;
|
|
+#endif
|
|
+
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
i2c->reg_base = devm_ioremap_resource(&dev->dev, res);
|
|
if (IS_ERR(i2c->reg_base))
|
|
@@ -1251,8 +1401,9 @@ static int i2c_pxa_probe(struct platform
|
|
return irq;
|
|
}
|
|
|
|
- /* Default adapter num to device id; i2c_pxa_probe_dt can override. */
|
|
- i2c->adap.nr = dev->id;
|
|
+ ret = i2c_pxa_init_recovery(i2c);
|
|
+ if (ret)
|
|
+ return ret;
|
|
|
|
ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type);
|
|
if (ret > 0)
|
|
@@ -1260,9 +1411,6 @@ static int i2c_pxa_probe(struct platform
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
- i2c->adap.owner = THIS_MODULE;
|
|
- i2c->adap.retries = 5;
|
|
-
|
|
spin_lock_init(&i2c->lock);
|
|
init_waitqueue_head(&i2c->wait);
|
|
|
|
@@ -1332,12 +1480,6 @@ static int i2c_pxa_probe(struct platform
|
|
|
|
i2c_pxa_reset(i2c);
|
|
|
|
- i2c->adap.algo_data = i2c;
|
|
- i2c->adap.dev.parent = &dev->dev;
|
|
-#ifdef CONFIG_OF
|
|
- i2c->adap.dev.of_node = dev->dev.of_node;
|
|
-#endif
|
|
-
|
|
ret = i2c_add_numbered_adapter(&i2c->adap);
|
|
if (ret < 0)
|
|
goto ereqirq;
|