mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
c515cd7c34
ALFA Network R36M-E4G is a dual-SIM, N300 Wi-Fi, compact size platform
based on MediaTek MT7620A WiSoC. This product is designed for operation
with 4G modem (can be bought in bundle with Quectel EC25, EG25 or EP06)
but supports also Wi-Fi modules (miniPCIe slot has USB and PCIe buses).
Specification:
- MT7620A (580 MHz)
- 64/128/256 MB of RAM (DDR2)
- 16/32+ MB of FLASH (SPI NOR)
- 2x 10/100 Mbps Ethernet, with passive PoE support (24 V)
- 2T2R 2.4 GHz (MT7620A), with ext. LNA (RFFM4227)
- 1x miniPCIe slot (with PCIe and USB 2.0 buses and optional 5 V)
- 2x SIM slot (mini, micro) with detect and switch driven by GPIO
- 2x u.fl antenna connectors (for Wi-Fi)
- 8x LED (7 driven by GPIO)
- 2x button (reset, wifi)
- 2x UART (4-pin/2.54 mm pitch, 10-pin/1.27 mm pitch) headers on PCB
- 1x I2C (4-pin, 1.27 mm pitch) header on PCB
- 1x LED (8-pin, 1.27 mm pitch) header on PCB
- 1x DC jack with lock (12 V)
Other:
- there is a dedicated, 4-pin connector for optional RTC module (Holtek
HT138x) with 'enable' input, not available at the time of preparing
support for this board
- miniPCIe slot supports additional 5 V supply on pins 47 and 49 but a
jumper resistor (R174) is not installed by default
- U-Boot selects default SIM slot, based on value of 'default_sim' env
variable: '1' or unset -> SIM1 (mini), '2' -> SIM2 (micro). This will
work only if both slots are occupied, otherwise U-Boot will always
select slot with SIM card inside (user can override it later, in
user-space)
- U-Boot resets the modem, using PERSTn signal, before starting kernel
- this board supports 'dual image' feature (controlled by 'dual_image'
U-Boot environment variable)
Flash instruction:
You can use the 'sysupgrade' image directly in vendor firmware which is
based on OpenWrt (make sure to not preserve settings - use 'sysupgrade
-n -F ...' command). Alternatively, use web recovery mode in U-Boot:
1. Power the device with reset button pressed, the modem LED will start
blinking slowly and after ~3 seconds, when it starts blinking faster,
you can release the button.
2. Setup static IP 192.168.1.2/24 on your PC.
3. Go to 192.168.1.1 in browser and upload 'sysupgrade' image.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
(backported from commit dfecf94c20
)
463 lines
16 KiB
Bash
Executable File
463 lines
16 KiB
Bash
Executable File
#!/bin/sh
|
|
|
|
. /lib/functions/uci-defaults.sh
|
|
|
|
set_wifi_led() {
|
|
ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}"
|
|
}
|
|
|
|
|
|
board=$(board_name)
|
|
boardname="${board##*,}"
|
|
|
|
board_config_update
|
|
|
|
case $board in
|
|
3g-6200n|\
|
|
br-6475nd|\
|
|
mzk-w300nh2)
|
|
set_wifi_led "$boardname:amber:wlan"
|
|
;;
|
|
3g-6200nl|\
|
|
air3gii|\
|
|
hilink,hlk-7628n|\
|
|
mr-102n|\
|
|
skylab,skw92a|\
|
|
wnce2001|\
|
|
zbt-we2026)
|
|
set_wifi_led "$boardname:green:wlan"
|
|
;;
|
|
ai-br100)
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" "eth0.2"
|
|
set_wifi_led "$boardname:blue:wlan"
|
|
;;
|
|
alfa-network,ac1200rm)
|
|
set_wifi_led "$boardname:green:wlan2g" "wlan1"
|
|
;;
|
|
alfa-network,awusfree1|\
|
|
edimax,br-6478ac-v2)
|
|
set_wifi_led "$boardname:blue:wlan"
|
|
;;
|
|
alfa-network,r36m-e4g)
|
|
ucidef_set_led_netdev "4g" "4g" "$boardname:orange:4g" "wwan0"
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x8"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
|
|
;;
|
|
alfa-network,tube-e4g)
|
|
ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0"
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" "eth0"
|
|
;;
|
|
all0256n-4M|\
|
|
all0256n-8M)
|
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow" "RSSILOW" "all0256n:green:rssilow" "wlan0" "1" "40" "0" "6"
|
|
ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "all0256n:green:rssimed" "wlan0" "30" "80" "-29" "5"
|
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "all0256n:green:rssihigh" "wlan0" "70" "100" "-69" "8"
|
|
set_wifi_led "rt2800pci-phy0::radio"
|
|
;;
|
|
ar670w|\
|
|
ar725w|\
|
|
awapn2403)
|
|
set_wifi_led "rt2800soc-phy0::radio"
|
|
;;
|
|
asl26555-8M|\
|
|
asl26555-16M)
|
|
ucidef_set_led_netdev "eth" "ETH" "asl26555:green:eth" "eth0"
|
|
set_wifi_led "asl26555:green:wlan"
|
|
;;
|
|
bdcom,wap2100-sk|\
|
|
hiwifi,hc5861b)
|
|
set_wifi_led "$boardname:green:wlan2g"
|
|
;;
|
|
belkin,f9k1109v1)
|
|
set_usb_led "$boardname:green:usb1"
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0"
|
|
;;
|
|
broadway)
|
|
set_wifi_led "$boardname:red:wps_active"
|
|
;;
|
|
c108)
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
|
|
ucidef_set_led_netdev "modem" "modem" "$boardname:green:modem" "wwan0"
|
|
;;
|
|
c20i)
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
|
|
ucidef_set_led_wlan "wlan" "wlan" "$boardname:blue:wlan" "phy0radio"
|
|
;;
|
|
c50)
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
|
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" wlan1
|
|
set_wifi_led "$boardname:green:wlan5g"
|
|
;;
|
|
cf-wr800n)
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:white:ethernet" eth0.1
|
|
set_wifi_led "$boardname:white:wifi"
|
|
;;
|
|
cudy,wr1000)
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
|
|
ucidef_set_led_switch "lan1" "lan1" "$boardname:blue:lan1" "switch0" "0x08"
|
|
ucidef_set_led_switch "lan2" "lan2" "$boardname:blue:lan2" "switch0" "0x04"
|
|
;;
|
|
d240|\
|
|
mlw221|\
|
|
mlwg2|\
|
|
rakwireless,rak633|\
|
|
rt-ac51u)
|
|
set_wifi_led "$boardname:blue:wifi"
|
|
;;
|
|
dcs-930l-b1)
|
|
ucidef_set_led_netdev "wifi" "WiFi" "$boardname:blue:wps"
|
|
;;
|
|
dir-300-b1|\
|
|
dir-300-b7|\
|
|
dir-320-b1|\
|
|
dir-600-b1|\
|
|
dir-610-a1|\
|
|
dir-615-d|\
|
|
dir-615-h1|\
|
|
dir-620-a1|\
|
|
esr-9753|\
|
|
hlk-rm04|\
|
|
kn|\
|
|
nbg-419n2|\
|
|
sl-r7205|\
|
|
v11st-fe|\
|
|
w306r-v20|\
|
|
w502u|\
|
|
wt1520-4M|\
|
|
wt1520-8M|\
|
|
zyxel,keenetic-start)
|
|
set_wifi_led "rt2800pci-phy0::radio"
|
|
;;
|
|
dir-620-d1|\
|
|
dlink,dwr-116-a1|\
|
|
head-weblink,hdrm200|\
|
|
kn_rc|\
|
|
kn_rf|\
|
|
kng_rc|\
|
|
mzk-ex300np|\
|
|
oy-0001|\
|
|
tew-714tru|\
|
|
zbt-wr8305rt)
|
|
set_wifi_led "$boardname:green:wifi"
|
|
;;
|
|
dlink,dwr-118-a1)
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1f"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x20"
|
|
set_wifi_led "$boardname:green:wlan2g" "wlan1"
|
|
;;
|
|
dlink,dwr-118-a2)
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0e"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
|
set_wifi_led "$boardname:green:wlan2g" "wlan1"
|
|
;;
|
|
dlink,dwr-921-c1|\
|
|
dlink,dwr-922-e2)
|
|
set_wifi_led "$boardname:green:wifi"
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
|
|
ucidef_set_led_netdev "signalstrength" "signalstrength" "$boardname:green:sigstrength" "wwan0" "link"
|
|
ucidef_set_led_netdev "4g" "4g" "$boardname:green:4g" "wwan0" "tx rx"
|
|
;;
|
|
dir-860l-b1)
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:green:net" "eth0.2"
|
|
;;
|
|
ex2700|\
|
|
wn3000rpv3)
|
|
set_wifi_led "$boardname:green:router"
|
|
;;
|
|
ex3700)
|
|
ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
|
|
ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
|
|
;;
|
|
f5d8235-v1)
|
|
set_wifi_led "$boardname:blue:wireless"
|
|
;;
|
|
fonera20n|\
|
|
tiny-ac)
|
|
set_wifi_led "$boardname:orange:wifi"
|
|
;;
|
|
gnubee,gb-pc1|\
|
|
gnubee,gb-pc2)
|
|
ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x01"
|
|
ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x10"
|
|
;;
|
|
gl-mt300a|\
|
|
gl-mt300n|\
|
|
gl-mt750)
|
|
set_wifi_led "$boardname:wlan"
|
|
;;
|
|
gl-mt300n-v2)
|
|
set_wifi_led "$boardname:red:wlan"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x1"
|
|
;;
|
|
hc5661|\
|
|
hc5661a)
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
|
|
set_wifi_led "$boardname:blue:wlan2g"
|
|
;;
|
|
hc5761|\
|
|
hc5861)
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
|
|
ucidef_set_led_netdev "wifi5g" "wifi5g" "$boardname:blue:wlan5g" "wlan0"
|
|
ucidef_set_led_netdev "wifi2g" "wifi2g" "$boardname:blue:wlan2g" "wlan1"
|
|
;;
|
|
hg255d)
|
|
set_wifi_led "$boardname:green:wlan"
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:green:internet" "eth0.2"
|
|
;;
|
|
hpm)
|
|
ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
|
|
set_wifi_led "$boardname:green:wifi"
|
|
;;
|
|
ht-tm02)
|
|
ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
|
|
set_wifi_led "$boardname:blue:wlan"
|
|
;;
|
|
iodata,wn-ac1167gr|\
|
|
iodata,wn-ac733gr3)
|
|
ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio"
|
|
ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio"
|
|
;;
|
|
kimax,u35wf)
|
|
set_wifi_led "$boardname:blue:wifi"
|
|
ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
|
|
;;
|
|
lava,lr-25g001)
|
|
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "wlan1"
|
|
ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:green:wlan5g" "wlan0"
|
|
;;
|
|
linkits7688)
|
|
ucidef_set_led_wlan "wifi" "wifi" "linkit-smart-7688:orange:wifi" "phy0tpt"
|
|
;;
|
|
m2m)
|
|
set_wifi_led "$boardname:blue:wifi"
|
|
ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
|
|
;;
|
|
mikrotik,rbm11g)
|
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
|
ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
|
|
ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
|
|
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
|
|
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
|
|
ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
|
|
;;
|
|
miniembplug)
|
|
set_wifi_led "$boardname:red:wlan"
|
|
;;
|
|
mr200)
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:white:lan" "eth0.1"
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:white:wan" "usb0"
|
|
set_wifi_led "$boardname:white:wlan"
|
|
;;
|
|
mtc,wr1201)
|
|
ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x0f"
|
|
;;
|
|
mzk-ex750np|\
|
|
zbtlink,zbt-we826-e)
|
|
set_wifi_led "$boardname:red:wifi"
|
|
;;
|
|
netgear,r6120)
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x0f"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
|
|
ucidef_set_led_wlan "wlan2g" "WiFi 2.4GHz" "$boardname:green:wlan2g" "phy0tpt"
|
|
;;
|
|
gehua,ghl-r-001|\
|
|
pbr-m1)
|
|
ucidef_set_led_netdev "internet" "internet" "$boardname:blue:internet" "eth0.2"
|
|
;;
|
|
d-team,newifi-d2)
|
|
ucidef_set_led_switch "internet" "internet" "$boardname:amber:internet" "switch0" "0x10"
|
|
ucidef_set_led_netdev "wlan2g" "WiFi 2.4GHz" "$boardname:blue:wlan2g" "wlan0"
|
|
ucidef_set_led_netdev "wlan5g" "WiFi 5GHz" "$boardname:blue:wlan5g" "wlan1"
|
|
;;
|
|
psg1208)
|
|
set_wifi_led "$boardname:white:wlan2g"
|
|
;;
|
|
px-4885-4M|\
|
|
px-4885-8M)
|
|
set_wifi_led "px-4885:orange:wifi"
|
|
;;
|
|
r6220|\
|
|
netgear,r6350|\
|
|
wndr3700v5)
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
|
|
;;
|
|
re350-v1)
|
|
ucidef_set_led_netdev "wifi2g" "Wifi 2.4G" "$boardname:blue:wifi2G" "wlan0"
|
|
ucidef_set_led_netdev "wifi5g" "Wifi 5G" "$boardname:blue:wifi5G" "wlan1"
|
|
ucidef_set_led_netdev "eth_act" "LAN act" "$boardname:green:eth_act" "eth0" "tx rx"
|
|
ucidef_set_led_switch "eth_link" "LAN link" "$boardname:green:eth_link" "switch0" "0x01"
|
|
;;
|
|
rp-n53)
|
|
ucidef_set_led_netdev "eth" "Network" "$boardname:white:back" "eth0"
|
|
set_wifi_led "$boardname:blue:wifi"
|
|
;;
|
|
rt-n12p)
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0.1
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:green:wan" eth0.2
|
|
set_wifi_led "$boardname:green:air"
|
|
;;
|
|
rt-n14u)
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:blue:lan" eth0.1
|
|
ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
|
|
set_wifi_led "$boardname:blue:air"
|
|
;;
|
|
tama,w06)
|
|
ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
|
|
ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
|
|
;;
|
|
tl-wr840n-v4)
|
|
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
|
;;
|
|
tl-wr841n-v13)
|
|
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
|
|
ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x2"
|
|
ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x4"
|
|
ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x8"
|
|
ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
|
;;
|
|
tplink,c2-v1)
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
|
|
set_wifi_led "$boardname:green:wlan"
|
|
;;
|
|
tplink,c20-v1)
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"
|
|
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:blue:wlan2g" "wlan0"
|
|
;;
|
|
tplink,c20-v4)
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
|
ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan2g" "wlan0"
|
|
;;
|
|
tplink,c50-v3|\
|
|
tplink,c50-v4)
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
|
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt"
|
|
ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt"
|
|
;;
|
|
tplink,tl-wa801nd-v5)
|
|
ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt"
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0"
|
|
;;
|
|
tplink,tl-mr3020-v3)
|
|
set_wifi_led "$boardname:green:wlan"
|
|
ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0"
|
|
;;
|
|
tplink,tl-mr3420-v5|\
|
|
tplink,tl-wr842n-v5)
|
|
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
|
;;
|
|
tplink,tl-wr902ac-v3)
|
|
ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt"
|
|
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
|
|
;;
|
|
u25awf-h1)
|
|
set_wifi_led "u25awf:red:wifi"
|
|
ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
|
|
;;
|
|
u7628-01-128M-16M)
|
|
ucidef_set_led_switch "lan1" "lan1" "u7628-01:green:lan1" "switch0" "0x2"
|
|
ucidef_set_led_switch "lan2" "lan2" "u7628-01:green:lan2" "switch0" "0x4"
|
|
ucidef_set_led_switch "lan3" "lan3" "u7628-01:green:lan3" "switch0" "0x8"
|
|
ucidef_set_led_switch "lan4" "lan4" "u7628-01:green:lan4" "switch0" "0x10"
|
|
ucidef_set_led_switch "wan" "wan" "u7628-01:green:wan" "switch0" "0x01"
|
|
set_wifi_led "u7628-01:green:wlan"
|
|
;;
|
|
vocore-8M|\
|
|
vocore-16M)
|
|
ucidef_set_led_netdev "eth" "ETH" "vocore:orange:eth" "eth0"
|
|
;;
|
|
wavlink,wl-wn570ha1)
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
|
|
ucidef_set_rssimon "wlan0" "200000" "1"
|
|
ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan0" "1" "49"
|
|
ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan0" "50" "84"
|
|
ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan0" "85" "100"
|
|
set_wifi_led "$boardname:green:wifi"
|
|
;;
|
|
wavlink,wl-wn575a3)
|
|
ucidef_set_rssimon "wlan1" "200000" "1"
|
|
ucidef_set_led_rssi "wifi-low" "wifi-low" "$boardname:green:wifi-low" "wlan1" "1" "49"
|
|
ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84"
|
|
ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100"
|
|
;;
|
|
we1026-5g-16m)
|
|
ucidef_set_led_netdev "lan" "LAN" "we1026-5g:green:lan" "eth0"
|
|
set_wifi_led "we1026-5g:green:wifi"
|
|
;;
|
|
wrh-300cr)
|
|
set_wifi_led "$boardname:green:wlan"
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:green:ethernet" "eth0"
|
|
;;
|
|
xiaomi,mir3g)
|
|
ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x02" "0x08"
|
|
ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x08" "0x08"
|
|
ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
|
|
;;
|
|
xiaomi,mir3p)
|
|
ucidef_set_led_switch "wan-amber" "WAN (amber)" "$boardname:amber:wan" "switch0" "0x10" "0x08"
|
|
ucidef_set_led_switch "lan1-amber" "LAN1 (amber)" "$boardname:amber:lan1" "switch0" "0x02" "0x08"
|
|
ucidef_set_led_switch "lan2-amber" "LAN2 (amber)" "$boardname:amber:lan2" "switch0" "0x04" "0x08"
|
|
ucidef_set_led_switch "lan3-amber" "LAN3 (amber)" "$boardname:amber:lan3" "switch0" "0x08" "0x08"
|
|
;;
|
|
xzwifi,creativebox-v1)
|
|
ucidef_set_led_switch "internet" "internet" "$boardname:blue:internet" "switch0" "0x10"
|
|
;;
|
|
y1)
|
|
ucidef_set_led_netdev "wifi" "WIFI" "$boardname:blue:wifi" "wlan1"
|
|
ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi5g" "wlan0"
|
|
ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x03"
|
|
;;
|
|
y1s)
|
|
ucidef_set_led_netdev "wifi" "WIFI" "$boardname:yellow:wifi" "wlan1"
|
|
ucidef_set_led_netdev "wifi5g" "WIFI5G" "$boardname:blue:wifi" "wlan0"
|
|
ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:internet" "eth0.2" "tx rx"
|
|
;;
|
|
youhua,wr1200js)
|
|
ucidef_set_led_switch "internet" "INTERNET" "$boardname:green:wan" "switch0" "0x01"
|
|
;;
|
|
zbt-ape522ii)
|
|
ucidef_set_led_netdev "wlan2g4" "wlan1-link" "$boardname:green:wlan2g4" "wlan1"
|
|
ucidef_set_led_netdev "sys1" "wlan1" "$boardname:green:sys1" "wlan1" "tx rx"
|
|
ucidef_set_led_netdev "sys2" "wlan0" "$boardname:green:sys2" "wlan0" "tx rx"
|
|
;;
|
|
zbt-wa05)
|
|
set_wifi_led "$boardname:blue:air"
|
|
;;
|
|
zbt-we826-16M|\
|
|
zbt-we826-32M)
|
|
set_wifi_led "zbt-we826:green:wifi"
|
|
;;
|
|
zbtlink,zbt-we1226)
|
|
set_wifi_led "$boardname:green:wlan"
|
|
ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01"
|
|
ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02"
|
|
ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10"
|
|
;;
|
|
zorlik,zl5900v2)
|
|
ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" eth0
|
|
;;
|
|
zyxel,keenetic-extra-ii)
|
|
set_wifi_led "$boardname:green:wifi"
|
|
ucidef_set_led_switch "internet" "internet" "$boardname:green:internet" "switch0" "0x01"
|
|
;;
|
|
youku-yk1)
|
|
set_wifi_led "$boardname:blue:air"
|
|
ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x10"
|
|
;;
|
|
esac
|
|
|
|
board_config_flush
|
|
|
|
exit 0
|