ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-22 23:12:32 +00:00
Code Issues Actions 6 Packages Projects Releases Wiki Activity
710520d5c7
openwrt/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch
Jonas Gorski 7d6cff4882 kernel: update 3.18 to 3.18.21 
Changelog:
 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46768
2015-09-02 10:18:15 +00:00

5707 lines
212 KiB
Diff
Raw Blame History

--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -214,8 +214,13 @@ int usb_hcd_pci_probe(struct pci_dev *de
goto disable_pci;
}
+
+#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
+ hcd->amd_resume_bug = 0;
+#else
hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) &&
driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0;
+#endif
if (driver->flags & HCD_MEMORY) {
/* EHCI, OHCI */
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1286,7 +1286,7 @@ static void hub_quiesce(struct usb_hub *
if (type != HUB_SUSPEND) {
/* Disconnect all the children */
for (i = 0; i < hdev->maxchild; ++i) {
- if (hub->ports[i]->child)
+ if (hub->ports[i] && hub->ports[i]->child)
usb_disconnect(&hub->ports[i]->child);
}
}
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -480,8 +480,10 @@ void usb_hub_remove_port_device(struct u
struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_port *peer;
- peer = port_dev->peer;
- if (peer)
- unlink_peers(port_dev, peer);
- device_unregister(&port_dev->dev);
+ if(port_dev) {
+ peer = port_dev->peer;
+ if (peer)
+ unlink_peers(port_dev, peer);
+ device_unregister(&port_dev->dev);
+ }
}
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -41,6 +41,13 @@ config USB_XHCI_PLATFORM
If unsure, say N.
+config USB_MT7621_XHCI_PLATFORM
+ bool
+ depends on USB_XHCI_PLATFORM
+ depends on SOC_MT7621
+ select USB_PHY
+ default y
+
config USB_XHCI_MVEBU
tristate "xHCI support for Marvell Armada 375/38x"
select USB_XHCI_PLATFORM
@@ -596,7 +603,7 @@ endif # USB_OHCI_HCD
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
+ depends on BROKEN && (PCI || USB_UHCI_SUPPORT_NON_PCI_HC)
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -16,7 +16,12 @@ xhci-hcd-y := xhci.o xhci-mem.o
xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
xhci-hcd-y += xhci-trace.o
+ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
+xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o
+endif
+
xhci-plat-hcd-y := xhci-plat.o
+
ifneq ($(CONFIG_USB_XHCI_MVEBU), )
xhci-plat-hcd-y += xhci-mvebu.o
endif
@@ -26,9 +31,14 @@ endif
obj-$(CONFIG_USB_WHCI_HCD) += whci/
+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
obj-$(CONFIG_PCI) += pci-quirks.o
+endif
+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM
obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
+endif
+
obj-$(CONFIG_USB_XHCI_PLATFORM) += xhci-plat-hcd.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
--- /dev/null
+++ b/drivers/usb/host/mtk-phy-7621.c
@@ -0,0 +1,445 @@
+#include "mtk-phy.h"
+
+#ifdef CONFIG_PROJECT_7621
+#include "mtk-phy-7621.h"
+
+//not used on SoC
+PHY_INT32 phy_init(struct u3phy_info *info){
+ return PHY_TRUE;
+}
+
+//not used on SoC
+PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){
+ return PHY_TRUE;
+}
+
+//--------------------------------------------------------
+// Function : fgEyeScanHelper_CheckPtInRegion()
+// Description : Check if the test point is in a rectangle region.
+// If it is in the rectangle, also check if this point
+// is on the multiple of deltaX and deltaY.
+// Parameter : strucScanRegion * prEye - the region
+// BYTE bX
+// BYTE bY
+// Return : BYTE - TRUE : This point needs to be tested
+// FALSE: This point will be omitted
+// Note : First check within the rectangle.
+// Secondly, use modulous to check if the point will be tested.
+//--------------------------------------------------------
+static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY)
+{
+ PHY_INT8 fgValid = true;
+
+
+ /// Be careful, the axis origin is on the TOP-LEFT corner.
+ /// Therefore the top-left point has the minimum X and Y
+ /// Botton-right point is the maximum X and Y
+ if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br)
+ && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br))
+ {
+ // With the region, now check whether or not the input test point is
+ // on the multiples of X and Y
+ // Do not have to worry about negative value, because we have already
+ // check the input bX, and bY is within the region.
+ if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX))
+ || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) )
+ {
+ // if the division will have remainder, that means
+ // the input test point is on the multiples of X and Y
+ fgValid = false;
+ }
+ else
+ {
+ }
+ }
+ else
+ {
+
+ fgValid = false;
+ }
+ return fgValid;
+}
+
+//--------------------------------------------------------
+// Function : EyeScanHelper_RunTest()
+// Description : Enable the test, and wait til it is completed
+// Parameter : None
+// Return : None
+// Note : None
+//--------------------------------------------------------
+static void EyeScanHelper_RunTest(struct u3phy_info *info)
+{
+ DRV_UDELAY(100);
+ // Disable the test
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0
+ DRV_UDELAY(100);
+ // Run the test
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1
+ DRV_UDELAY(100);
+ // Wait til it's done
+ //RGS_SSUSB_RX_EYE_CNT_RDY
+ while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
+ , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY));
+}
+
+//--------------------------------------------------------
+// Function : fgEyeScanHelper_CalNextPoint()
+// Description : Calcualte the test point for the measurement
+// Parameter : None
+// Return : BOOL - TRUE : the next point is within the
+// boundaryof HW limit
+// FALSE: the next point is out of the HW limit
+// Note : The next point is obtained by calculating
+// from the bottom left of the region rectangle
+// and then scanning up until it reaches the upper
+// limit. At this time, the x will increment, and
+// start scanning downwards until the y hits the
+// zero.
+//--------------------------------------------------------
+static PHY_INT8 fgEyeScanHelper_CalNextPoint(void)
+{
+ if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN))
+ || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP))
+ )
+ {
+ /// Reaches the limit of Y axis
+ /// Increment X
+ _bXcurr++;
+ _fgXChged = true;
+ _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP;
+
+ if (_bXcurr > MAX_X)
+ {
+ return false;
+ }
+ }
+ else
+ {
+ _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1;
+ _fgXChged = false;
+ }
+ return PHY_TRUE;
+}
+
+PHY_INT32 eyescan_init(struct u3phy_info *info){
+ //initial PHY setting
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega)
+ , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1);
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3)
+ , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1);
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
+ return PHY_TRUE;
+}
+
+PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
+ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){
+ PHY_INT32 cOfst = 0;
+ PHY_UINT8 bIdxX = 0;
+ PHY_UINT8 bIdxY = 0;
+ //PHY_INT8 bCnt = 0;
+ PHY_UINT8 bIdxCycCnt = 0;
+ PHY_INT8 fgValid;
+ PHY_INT8 cX;
+ PHY_INT8 cY;
+ PHY_UINT8 bExtendCnt;
+ PHY_INT8 isContinue;
+ //PHY_INT8 isBreak;
+ PHY_UINT32 wErr0 = 0, wErr1 = 0;
+ //PHY_UINT32 temp;
+
+ PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
+ PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
+
+ _rEye1.bX_tl = x_t1;
+ _rEye1.bY_tl = y_t1;
+ _rEye1.bX_br = x_br;
+ _rEye1.bY_br = y_br;
+ _rEye1.bDeltaX = delta_x;
+ _rEye1.bDeltaY = delta_y;
+
+ _rEye2.bX_tl = x_t1;
+ _rEye2.bY_tl = y_t1;
+ _rEye2.bX_br = x_br;
+ _rEye2.bY_br = y_br;
+ _rEye2.bDeltaX = delta_x;
+ _rEye2.bDeltaY = delta_y;
+
+ _rTestCycle.wEyeCnt = eye_cnt;
+ _rTestCycle.bNumOfEyeCnt = num_cnt;
+ _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt;
+ _rTestCycle.bPICalEn = PI_cal_en;
+
+ _bXcurr = 0;
+ _bYcurr = 0;
+ _eScanDir = SCAN_DN;
+ _fgXChged = false;
+
+ printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \
+ eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \
+ x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt);
+
+ //force SIGDET to OFF
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+ , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+ , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
+ , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0
+
+ // RX_TRI_DET_EN to Disable
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3)
+ , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0
+
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0
+
+
+ if (PI_cal_en){
+ // PI Calibration
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1
+
+ DRV_UDELAY(20);
+
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0)
+ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0
+ _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5)
+ , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO
+
+ printk(KERN_ERR "PI result: %d\n", _bPIResult);
+ }
+ // Read Initial DAC
+ // Set CYCLE
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3)
+ ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT
+
+ // Eye Monitor Feature
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1)
+ , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1
+
+ // Move X,Y to the top-left corner
+ for (cOfst = 0; cOfst >= -64; cOfst--)
+ {
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
+ }
+ for (cOfst = 0; cOfst < 64; cOfst++)
+ {
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y
+ }
+ //ClearErrorResult
+ for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){
+ for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++)
+ {
+ for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){
+ pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0;
+ pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0;
+ }
+ }
+ }
+ isContinue = true;
+ while(isContinue){
+ //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr);
+ // The point is within the boundary, then let's check if it is within
+ // the testing region.
+ // The point is only test-able if one of the eye region
+ // includes this point.
+ fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr)
+ || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr);
+ // Translate bX and bY to 2's complement from where the origin was on the
+ // top left corner.
+ // 0x40 and 0x3F needs a bit of thinking!!!! >"<
+ cX = (_bXcurr ^ 0x40);
+ cY = (_bYcurr ^ 0x3F);
+
+ // Set X if necessary
+ if (_fgXChged == true)
+ {
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET
+ }
+ // Set Y
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y
+
+ /// Test this point!
+ if (fgValid){
+ for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++)
+ {
+ //run test
+ EyeScanHelper_RunTest(info);
+ }
+ for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++)
+ {
+ EyeScanHelper_RunTest(info);
+ wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3)
+ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0);
+ wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4)
+ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1);
+
+ pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0;
+ pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1;
+
+ //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]);
+// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n"
+// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]);
+ }
+ //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]);
+ }
+ else{
+
+ }
+ if (fgEyeScanHelper_CalNextPoint() == false){
+#if 0
+ printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr);
+ printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY);
+#endif
+ printk(KERN_ERR "end of eye scan\n");
+ isContinue = false;
+ }
+ }
+ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
+
+ // Move X,Y to the top-left corner
+ for (cOfst = 63; cOfst >= 0; cOfst--)
+ {
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET
+ }
+ for (cOfst = 63; cOfst >= 0; cOfst--)
+ {
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst);
+ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0)
+ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst);
+
+ }
+ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n"
+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET)
+ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y));
+
+ printk(KERN_ERR "PI result: %d\n", _bPIResult);
+ printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0);
+ printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1);
+
+ return PHY_TRUE;
+}
+
+//not used on SoC
+PHY_INT32 u2_save_cur_en(struct u3phy_info *info){
+ return PHY_TRUE;
+}
+
+//not used on SoC
+PHY_INT32 u2_save_cur_re(struct u3phy_info *info){
+ return PHY_TRUE;
+}
+
+PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){
+ PHY_INT32 i=0;
+ //PHY_INT32 j=0;
+ //PHY_INT8 u1SrCalVal = 0;
+ //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN;
+ PHY_INT32 fgRet = 0;
+ PHY_INT32 u4FmOut = 0;
+ PHY_INT32 u4Tmp = 0;
+ //PHY_INT32 temp;
+
+ // => RG_USB20_HSTX_SRCAL_EN = 1
+ // enable HS TX SR calibration
+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
+ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1);
+ DRV_MSLEEP(1);
+
+ // => RG_FRCK_EN = 1
+ // Enable free run clock
+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
+ , RG_FRCK_EN_OFST, RG_FRCK_EN, 1);
+
+ // MT6290 HS signal quality patch
+ // => RG_CYCLECNT = 400
+ // Setting cyclecnt =400
+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
+ , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400);
+
+ // => RG_FREQDET_EN = 1
+ // Enable frequency meter
+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
+ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1);
+
+ // wait for FM detection done, set 10ms timeout
+ for(i=0; i<10; i++){
+ // => u4FmOut = USB_FM_OUT
+ // read FM_OUT
+ u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0));
+ printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut);
+
+ // check if FM detection done
+ if (u4FmOut != 0)
+ {
+ fgRet = 0;
+ printk("FM detection done! loop = %d\n", i);
+
+ break;
+ }
+
+ fgRet = 1;
+ DRV_MSLEEP(1);
+ }
+ // => RG_FREQDET_EN = 0
+ // disable frequency meter
+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0)
+ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0);
+
+ // => RG_FRCK_EN = 0
+ // disable free run clock
+ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1)
+ , RG_FRCK_EN_OFST, RG_FRCK_EN, 0);
+
+ // => RG_USB20_HSTX_SRCAL_EN = 0
+ // disable HS TX SR calibration
+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
+ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0);
+ DRV_MSLEEP(1);
+
+ if(u4FmOut == 0){
+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
+ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4);
+
+ fgRet = 1;
+ }
+ else{
+ // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits)
+ u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000;
+ printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp);
+ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0)
+ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp);
+ }
+ return fgRet;
+}
+
+#endif
--- /dev/null
+++ b/drivers/usb/host/mtk-phy-7621.h
@@ -0,0 +1,2871 @@
+#ifdef CONFIG_PROJECT_7621
+#ifndef __MTK_PHY_7621_H
+#define __MTK_PHY_7621_H
+
+#define U2_SR_COEF_7621 28
+
+///////////////////////////////////////////////////////////////////////////////
+
+struct u2phy_reg {
+ //0x0
+ PHY_LE32 u2phyac0;
+ PHY_LE32 u2phyac1;
+ PHY_LE32 u2phyac2;
+ PHY_LE32 reserve0;
+ //0x10
+ PHY_LE32 u2phyacr0;
+ PHY_LE32 u2phyacr1;
+ PHY_LE32 u2phyacr2;
+ PHY_LE32 u2phyacr3;
+ //0x20
+ PHY_LE32 u2phyacr4;
+ PHY_LE32 u2phyamon0;
+ PHY_LE32 reserve1[2];
+ //0x30~0x50
+ PHY_LE32 reserve2[12];
+ //0x60
+ PHY_LE32 u2phydcr0;
+ PHY_LE32 u2phydcr1;
+ PHY_LE32 u2phydtm0;
+ PHY_LE32 u2phydtm1;
+ //0x70
+ PHY_LE32 u2phydmon0;
+ PHY_LE32 u2phydmon1;
+ PHY_LE32 u2phydmon2;
+ PHY_LE32 u2phydmon3;
+ //0x80
+ PHY_LE32 u2phybc12c;
+ PHY_LE32 u2phybc12c1;
+ PHY_LE32 reserve3[2];
+ //0x90~0xe0
+ PHY_LE32 reserve4[24];
+ //0xf0
+ PHY_LE32 reserve6[3];
+ PHY_LE32 regfcom;
+};
+
+//U3D_U2PHYAC0
+#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28
+#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26
+#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24
+#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23
+#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16
+#define RG_USB20_REF_EN (0x1<<15) //15:15
+#define RG_USB20_INTR_EN (0x1<<14) //14:14
+#define RG_USB20_BG_TRIM (0xf<<8) //11:8
+#define RG_USB20_BG_RBSEL (0x3<<6) //7:6
+#define RG_USB20_BG_RASEL (0x3<<4) //5:4
+#define RG_USB20_BGR_DIV (0x3<<2) //3:2
+#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1
+#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0
+
+//U3D_U2PHYAC1
+#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28
+#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24
+#define RG_USB20_MPX_SEL (0xff<<16) //23:16
+#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12
+#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8
+#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3
+#define RG_USB20_USBPLL_LF (0x1<<2) //2:2
+#define RG_USB20_USBPLL_BR (0x1<<1) //1:1
+#define RG_USB20_USBPLL_BP (0x1<<0) //0:0
+
+//U3D_U2PHYAC2
+#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17
+#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16
+#define RG_USB20_CLKREF_REV (0xff<<0) //7:0
+
+//U3D_U2PHYACR0
+#define RG_USB20_ICUSB_EN (0x1<<24) //24:24
+#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23
+#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16
+#define RG_USB20_LS_CR (0x7<<12) //14:12
+#define RG_USB20_FS_CR (0x7<<8) //10:8
+#define RG_USB20_LS_SR (0x7<<4) //6:4
+#define RG_USB20_FS_SR (0x7<<0) //2:0
+
+//U3D_U2PHYACR1
+#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28
+#define RG_USB20_SQD (0x3<<24) //25:24
+#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20
+#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19
+#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18
+#define RG_USB20_INLPBK_EN (0x1<<17) //17:17
+#define RG_USB20_CHIRP_EN (0x1<<16) //16:16
+#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15
+#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8
+#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7
+#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0
+
+//U3D_U2PHYACR2
+#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29
+#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28
+#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27
+#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24
+#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22
+#define RG_USB20_DISCD (0x3<<20) //21:20
+#define RG_USB20_DISCTH (0xf<<16) //19:16
+#define RG_USB20_SQCAL_EN (0x1<<15) //15:15
+#define RG_USB20_SQCAL (0xf<<8) //11:8
+#define RG_USB20_SQTH (0xf<<0) //3:0
+
+//U3D_U2PHYACR3
+#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28
+#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26
+#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24
+#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23
+#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20
+#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19
+#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18
+#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17
+#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16
+#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13
+#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12
+#define RG_USB20_EN_PU_DM (0x1<<11) //11:11
+#define RG_USB20_EN_PD_DM (0x1<<10) //10:10
+#define RG_USB20_EN_PU_DP (0x1<<9) //9:9
+#define RG_USB20_EN_PD_DP (0x1<<8) //8:8
+#define RG_USB20_PHY_REV (0xff<<0) //7:0
+
+//U3D_U2PHYACR4
+#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18
+#define RG_USB20_DM_100K_EN (0x1<<17) //17:17
+#define USB20_DP_100K_EN (0x1<<16) //16:16
+#define USB20_GPIO_DM_I (0x1<<15) //15:15
+#define USB20_GPIO_DP_I (0x1<<14) //14:14
+#define USB20_GPIO_DM_OE (0x1<<13) //13:13
+#define USB20_GPIO_DP_OE (0x1<<12) //12:12
+#define RG_USB20_GPIO_CTL (0x1<<9) //9:9
+#define USB20_GPIO_MODE (0x1<<8) //8:8
+#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5
+#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4
+#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2
+#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0
+
+//U3D_U2PHYAMON0
+#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1
+#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0
+
+//U3D_U2PHYDCR0
+#define RG_USB20_CDR_TST (0x3<<30) //31:30
+#define RG_USB20_GATED_ENB (0x1<<29) //29:29
+#define RG_USB20_TESTMODE (0x3<<26) //27:26
+#define RG_USB20_PLL_STABLE (0x1<<25) //25:25
+#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24
+#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8
+#define RG_USB20_EBTHRLD (0x1<<7) //7:7
+#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6
+#define RG_USB20_TX_TST (0x1<<5) //5:5
+#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4
+#define RG_USB20_CDR_FILT (0xf<<0) //3:0
+
+//U3D_U2PHYDCR1
+#define RG_USB20_PROBE_SEL (0xff<<24) //31:24
+#define RG_USB20_DRVVBUS (0x1<<23) //23:23
+#define RG_DEBUG_EN (0x1<<22) //22:22
+#define RG_USB20_OTG_PROBE (0x3<<20) //21:20
+#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18
+#define RG_USB20_BERTH (0x3<<16) //17:16
+#define RG_USB20_LBMODE (0x3<<13) //14:13
+#define RG_USB20_FORCE_TAP (0x1<<12) //12:12
+#define RG_USB20_TAPSEL (0xfff<<0) //11:0
+
+//U3D_U2PHYDTM0
+#define RG_UART_MODE (0x3<<30) //31:30
+#define FORCE_UART_I (0x1<<29) //29:29
+#define FORCE_UART_BIAS_EN (0x1<<28) //28:28
+#define FORCE_UART_TX_OE (0x1<<27) //27:27
+#define FORCE_UART_EN (0x1<<26) //26:26
+#define FORCE_USB_CLKEN (0x1<<25) //25:25
+#define FORCE_DRVVBUS (0x1<<24) //24:24
+#define FORCE_DATAIN (0x1<<23) //23:23
+#define FORCE_TXVALID (0x1<<22) //22:22
+#define FORCE_DM_PULLDOWN (0x1<<21) //21:21
+#define FORCE_DP_PULLDOWN (0x1<<20) //20:20
+#define FORCE_XCVRSEL (0x1<<19) //19:19
+#define FORCE_SUSPENDM (0x1<<18) //18:18
+#define FORCE_TERMSEL (0x1<<17) //17:17
+#define FORCE_OPMODE (0x1<<16) //16:16
+#define UTMI_MUXSEL (0x1<<15) //15:15
+#define RG_RESET (0x1<<14) //14:14
+#define RG_DATAIN (0xf<<10) //13:10
+#define RG_TXVALIDH (0x1<<9) //9:9
+#define RG_TXVALID (0x1<<8) //8:8
+#define RG_DMPULLDOWN (0x1<<7) //7:7
+#define RG_DPPULLDOWN (0x1<<6) //6:6
+#define RG_XCVRSEL (0x3<<4) //5:4
+#define RG_SUSPENDM (0x1<<3) //3:3
+#define RG_TERMSEL (0x1<<2) //2:2
+#define RG_OPMODE (0x3<<0) //1:0
+
+//U3D_U2PHYDTM1
+#define RG_USB20_PRBS7_EN (0x1<<31) //31:31
+#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24
+#define RG_USB20_CLK48M_EN (0x1<<23) //23:23
+#define RG_USB20_CLK60M_EN (0x1<<22) //22:22
+#define RG_UART_I (0x1<<19) //19:19
+#define RG_UART_BIAS_EN (0x1<<18) //18:18
+#define RG_UART_TX_OE (0x1<<17) //17:17
+#define RG_UART_EN (0x1<<16) //16:16
+#define FORCE_VBUSVALID (0x1<<13) //13:13
+#define FORCE_SESSEND (0x1<<12) //12:12
+#define FORCE_BVALID (0x1<<11) //11:11
+#define FORCE_AVALID (0x1<<10) //10:10
+#define FORCE_IDDIG (0x1<<9) //9:9
+#define FORCE_IDPULLUP (0x1<<8) //8:8
+#define RG_VBUSVALID (0x1<<5) //5:5
+#define RG_SESSEND (0x1<<4) //4:4
+#define RG_BVALID (0x1<<3) //3:3
+#define RG_AVALID (0x1<<2) //2:2
+#define RG_IDDIG (0x1<<1) //1:1
+#define RG_IDPULLUP (0x1<<0) //0:0
+
+//U3D_U2PHYDMON0
+#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0
+
+//U3D_U2PHYDMON1
+#define USB20_UART_O (0x1<<31) //31:31
+#define RGO_USB20_LB_PASS (0x1<<30) //30:30
+#define RGO_USB20_LB_DONE (0x1<<29) //29:29
+#define AD_USB20_BVALID (0x1<<28) //28:28
+#define USB20_IDDIG (0x1<<27) //27:27
+#define AD_USB20_VBUSVALID (0x1<<26) //26:26
+#define AD_USB20_SESSEND (0x1<<25) //25:25
+#define AD_USB20_AVALID (0x1<<24) //24:24
+#define USB20_LINE_STATE (0x3<<22) //23:22
+#define USB20_HST_DISCON (0x1<<21) //21:21
+#define USB20_TX_READY (0x1<<20) //20:20
+#define USB20_RX_ERROR (0x1<<19) //19:19
+#define USB20_RX_ACTIVE (0x1<<18) //18:18
+#define USB20_RX_VALIDH (0x1<<17) //17:17
+#define USB20_RX_VALID (0x1<<16) //16:16
+#define USB20_DATA_OUT (0xffff<<0) //15:0
+
+//U3D_U2PHYDMON2
+#define RGO_TXVALID_CNT (0xff<<24) //31:24
+#define RGO_RXACTIVE_CNT (0xff<<16) //23:16
+#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8
+#define USB20_PROBE_OUT (0xff<<0) //7:0
+
+//U3D_U2PHYDMON3
+#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16
+#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3
+#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2
+#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1
+#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0
+
+//U3D_U2PHYBC12C
+#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28
+#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24
+#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16
+#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14
+#define RG_CHGDT_VDATSRC (0x1<<13) //13:13
+#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10
+#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8
+#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7
+#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6
+#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5
+#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4
+#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3
+#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2
+#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1
+#define RG_CHGDT_EN (0x1<<0) //0:0
+
+//U3D_U2PHYBC12C1
+#define RG_CHGDT_REV (0xff<<0) //7:0
+
+//U3D_REGFCOM
+#define RG_PAGE (0xff<<24) //31:24
+#define I2C_MODE (0x1<<16) //16:16
+
+
+/* OFFSET */
+
+//U3D_U2PHYAC0
+#define RG_USB20_USBPLL_DIVEN_OFST (28)
+#define RG_USB20_USBPLL_CKCTRL_OFST (26)
+#define RG_USB20_USBPLL_PREDIV_OFST (24)
+#define RG_USB20_USBPLL_FORCE_ON_OFST (23)
+#define RG_USB20_USBPLL_FBDIV_OFST (16)
+#define RG_USB20_REF_EN_OFST (15)
+#define RG_USB20_INTR_EN_OFST (14)
+#define RG_USB20_BG_TRIM_OFST (8)
+#define RG_USB20_BG_RBSEL_OFST (6)
+#define RG_USB20_BG_RASEL_OFST (4)
+#define RG_USB20_BGR_DIV_OFST (2)
+#define RG_SIFSLV_CHP_EN_OFST (1)
+#define RG_SIFSLV_BGR_EN_OFST (0)
+
+//U3D_U2PHYAC1
+#define RG_USB20_VRT_VREF_SEL_OFST (28)
+#define RG_USB20_TERM_VREF_SEL_OFST (24)
+#define RG_USB20_MPX_SEL_OFST (16)
+#define RG_USB20_MPX_OUT_SEL_OFST (12)
+#define RG_USB20_TX_PH_ROT_SEL_OFST (8)
+#define RG_USB20_USBPLL_ACCEN_OFST (3)
+#define RG_USB20_USBPLL_LF_OFST (2)
+#define RG_USB20_USBPLL_BR_OFST (1)
+#define RG_USB20_USBPLL_BP_OFST (0)
+
+//U3D_U2PHYAC2
+#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17)
+#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16)
+#define RG_USB20_CLKREF_REV_OFST (0)
+
+//U3D_U2PHYACR0
+#define RG_USB20_ICUSB_EN_OFST (24)
+#define RG_USB20_HSTX_SRCAL_EN_OFST (23)
+#define RG_USB20_HSTX_SRCTRL_OFST (16)
+#define RG_USB20_LS_CR_OFST (12)
+#define RG_USB20_FS_CR_OFST (8)
+#define RG_USB20_LS_SR_OFST (4)
+#define RG_USB20_FS_SR_OFST (0)
+
+//U3D_U2PHYACR1
+#define RG_USB20_INIT_SQ_EN_DG_OFST (28)
+#define RG_USB20_SQD_OFST (24)
+#define RG_USB20_HSTX_TMODE_SEL_OFST (20)
+#define RG_USB20_HSTX_TMODE_EN_OFST (19)
+#define RG_USB20_PHYD_MONEN_OFST (18)
+#define RG_USB20_INLPBK_EN_OFST (17)
+#define RG_USB20_CHIRP_EN_OFST (16)
+#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15)
+#define RG_USB20_DM_ABIST_SELE_OFST (8)
+#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7)
+#define RG_USB20_DP_ABIST_SELE_OFST (0)
+
+//U3D_U2PHYACR2
+#define RG_USB20_OTG_ABIST_SELE_OFST (29)
+#define RG_USB20_OTG_ABIST_EN_OFST (28)
+#define RG_USB20_OTG_VBUSCMP_EN_OFST (27)
+#define RG_USB20_OTG_VBUSTH_OFST (24)
+#define RG_USB20_DISC_FIT_EN_OFST (22)
+#define RG_USB20_DISCD_OFST (20)
+#define RG_USB20_DISCTH_OFST (16)
+#define RG_USB20_SQCAL_EN_OFST (15)
+#define RG_USB20_SQCAL_OFST (8)
+#define RG_USB20_SQTH_OFST (0)
+
+//U3D_U2PHYACR3
+#define RG_USB20_HSTX_DBIST_OFST (28)
+#define RG_USB20_HSTX_BIST_EN_OFST (26)
+#define RG_USB20_HSTX_I_EN_MODE_OFST (24)
+#define RG_USB20_HSRX_TMODE_EN_OFST (23)
+#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20)
+#define RG_USB20_USB11_TMODE_EN_OFST (19)
+#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18)
+#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17)
+#define RG_USB20_TMODE_FS_LS_MODE_OFST (16)
+#define RG_USB20_HS_TERM_EN_MODE_OFST (13)
+#define RG_USB20_PUPD_BIST_EN_OFST (12)
+#define RG_USB20_EN_PU_DM_OFST (11)
+#define RG_USB20_EN_PD_DM_OFST (10)
+#define RG_USB20_EN_PU_DP_OFST (9)
+#define RG_USB20_EN_PD_DP_OFST (8)
+#define RG_USB20_PHY_REV_OFST (0)
+
+//U3D_U2PHYACR4
+#define RG_USB20_DP_100K_MODE_OFST (18)
+#define RG_USB20_DM_100K_EN_OFST (17)
+#define USB20_DP_100K_EN_OFST (16)
+#define USB20_GPIO_DM_I_OFST (15)
+#define USB20_GPIO_DP_I_OFST (14)
+#define USB20_GPIO_DM_OE_OFST (13)
+#define USB20_GPIO_DP_OE_OFST (12)
+#define RG_USB20_GPIO_CTL_OFST (9)
+#define USB20_GPIO_MODE_OFST (8)
+#define RG_USB20_TX_BIAS_EN_OFST (5)
+#define RG_USB20_TX_VCMPDN_EN_OFST (4)
+#define RG_USB20_HS_SQ_EN_MODE_OFST (2)
+#define RG_USB20_HS_RCV_EN_MODE_OFST (0)
+
+//U3D_U2PHYAMON0
+#define RGO_USB20_GPIO_DM_O_OFST (1)
+#define RGO_USB20_GPIO_DP_O_OFST (0)
+
+//U3D_U2PHYDCR0
+#define RG_USB20_CDR_TST_OFST (30)
+#define RG_USB20_GATED_ENB_OFST (29)
+#define RG_USB20_TESTMODE_OFST (26)
+#define RG_USB20_PLL_STABLE_OFST (25)
+#define RG_USB20_PLL_FORCE_ON_OFST (24)
+#define RG_USB20_PHYD_RESERVE_OFST (8)
+#define RG_USB20_EBTHRLD_OFST (7)
+#define RG_USB20_EARLY_HSTX_I_OFST (6)
+#define RG_USB20_TX_TST_OFST (5)
+#define RG_USB20_NEGEDGE_ENB_OFST (4)
+#define RG_USB20_CDR_FILT_OFST (0)
+
+//U3D_U2PHYDCR1
+#define RG_USB20_PROBE_SEL_OFST (24)
+#define RG_USB20_DRVVBUS_OFST (23)
+#define RG_DEBUG_EN_OFST (22)
+#define RG_USB20_OTG_PROBE_OFST (20)
+#define RG_USB20_SW_PLLMODE_OFST (18)
+#define RG_USB20_BERTH_OFST (16)
+#define RG_USB20_LBMODE_OFST (13)
+#define RG_USB20_FORCE_TAP_OFST (12)
+#define RG_USB20_TAPSEL_OFST (0)
+
+//U3D_U2PHYDTM0
+#define RG_UART_MODE_OFST (30)
+#define FORCE_UART_I_OFST (29)
+#define FORCE_UART_BIAS_EN_OFST (28)
+#define FORCE_UART_TX_OE_OFST (27)
+#define FORCE_UART_EN_OFST (26)
+#define FORCE_USB_CLKEN_OFST (25)
+#define FORCE_DRVVBUS_OFST (24)
+#define FORCE_DATAIN_OFST (23)
+#define FORCE_TXVALID_OFST (22)
+#define FORCE_DM_PULLDOWN_OFST (21)
+#define FORCE_DP_PULLDOWN_OFST (20)
+#define FORCE_XCVRSEL_OFST (19)
+#define FORCE_SUSPENDM_OFST (18)
+#define FORCE_TERMSEL_OFST (17)
+#define FORCE_OPMODE_OFST (16)
+#define UTMI_MUXSEL_OFST (15)
+#define RG_RESET_OFST (14)
+#define RG_DATAIN_OFST (10)
+#define RG_TXVALIDH_OFST (9)
+#define RG_TXVALID_OFST (8)
+#define RG_DMPULLDOWN_OFST (7)
+#define RG_DPPULLDOWN_OFST (6)
+#define RG_XCVRSEL_OFST (4)
+#define RG_SUSPENDM_OFST (3)
+#define RG_TERMSEL_OFST (2)
+#define RG_OPMODE_OFST (0)
+
+//U3D_U2PHYDTM1
+#define RG_USB20_PRBS7_EN_OFST (31)
+#define RG_USB20_PRBS7_BITCNT_OFST (24)
+#define RG_USB20_CLK48M_EN_OFST (23)
+#define RG_USB20_CLK60M_EN_OFST (22)
+#define RG_UART_I_OFST (19)
+#define RG_UART_BIAS_EN_OFST (18)
+#define RG_UART_TX_OE_OFST (17)
+#define RG_UART_EN_OFST (16)
+#define FORCE_VBUSVALID_OFST (13)
+#define FORCE_SESSEND_OFST (12)
+#define FORCE_BVALID_OFST (11)
+#define FORCE_AVALID_OFST (10)
+#define FORCE_IDDIG_OFST (9)
+#define FORCE_IDPULLUP_OFST (8)
+#define RG_VBUSVALID_OFST (5)
+#define RG_SESSEND_OFST (4)
+#define RG_BVALID_OFST (3)
+#define RG_AVALID_OFST (2)
+#define RG_IDDIG_OFST (1)
+#define RG_IDPULLUP_OFST (0)
+
+//U3D_U2PHYDMON0
+#define RG_USB20_PRBS7_BERTH_OFST (0)
+
+//U3D_U2PHYDMON1
+#define USB20_UART_O_OFST (31)
+#define RGO_USB20_LB_PASS_OFST (30)
+#define RGO_USB20_LB_DONE_OFST (29)
+#define AD_USB20_BVALID_OFST (28)
+#define USB20_IDDIG_OFST (27)
+#define AD_USB20_VBUSVALID_OFST (26)
+#define AD_USB20_SESSEND_OFST (25)
+#define AD_USB20_AVALID_OFST (24)
+#define USB20_LINE_STATE_OFST (22)
+#define USB20_HST_DISCON_OFST (21)
+#define USB20_TX_READY_OFST (20)
+#define USB20_RX_ERROR_OFST (19)
+#define USB20_RX_ACTIVE_OFST (18)
+#define USB20_RX_VALIDH_OFST (17)
+#define USB20_RX_VALID_OFST (16)
+#define USB20_DATA_OUT_OFST (0)
+
+//U3D_U2PHYDMON2
+#define RGO_TXVALID_CNT_OFST (24)
+#define RGO_RXACTIVE_CNT_OFST (16)
+#define RGO_USB20_LB_BERCNT_OFST (8)
+#define USB20_PROBE_OUT_OFST (0)
+
+//U3D_U2PHYDMON3
+#define RGO_USB20_PRBS7_ERRCNT_OFST (16)
+#define RGO_USB20_PRBS7_DONE_OFST (3)
+#define RGO_USB20_PRBS7_LOCK_OFST (2)
+#define RGO_USB20_PRBS7_PASS_OFST (1)
+#define RGO_USB20_PRBS7_PASSTH_OFST (0)
+
+//U3D_U2PHYBC12C
+#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28)
+#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24)
+#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16)
+#define RG_CHGDT_ISRC_LEV_OFST (14)
+#define RG_CHGDT_VDATSRC_OFST (13)
+#define RG_CHGDT_BGVREF_SEL_OFST (10)
+#define RG_CHGDT_RDVREF_SEL_OFST (8)
+#define RG_CHGDT_ISRC_DP_OFST (7)
+#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6)
+#define RG_CHGDT_VDAT_DM_OFST (5)
+#define RG_CHGDT_OPOUT_DP_OFST (4)
+#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3)
+#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2)
+#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1)
+#define RG_CHGDT_EN_OFST (0)
+
+//U3D_U2PHYBC12C1
+#define RG_CHGDT_REV_OFST (0)
+
+//U3D_REGFCOM
+#define RG_PAGE_OFST (24)
+#define I2C_MODE_OFST (16)
+
+
+///////////////////////////////////////////////////////////////////////////////
+
+struct u3phya_reg {
+ //0x0
+ PHY_LE32 reg0;
+ PHY_LE32 reg1;
+ PHY_LE32 reg2;
+ PHY_LE32 reg3;
+ //0x10
+ PHY_LE32 reg4;
+ PHY_LE32 reg5;
+ PHY_LE32 reg6;
+ PHY_LE32 reg7;
+ //0x20
+ PHY_LE32 reg8;
+ PHY_LE32 reg9;
+ PHY_LE32 rega;
+ PHY_LE32 regb;
+ //0x30
+ PHY_LE32 regc;
+ PHY_LE32 regd;
+ PHY_LE32 rege;
+};
+
+//U3D_reg0
+#define RG_SSUSB_BGR_EN (0x1<<31) //31:31
+#define RG_SSUSB_CHPEN (0x1<<30) //30:30
+#define RG_SSUSB_BG_DIV (0x3<<28) //29:28
+#define RG_SSUSB_INTR_EN (0x1<<26) //26:26
+#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24
+#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16
+#define RG_SSUSB_REF_EN (0x1<<15) //15:15
+#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11
+#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9
+#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7
+#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6
+#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0
+
+//U3D_reg1
+#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30
+#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27
+#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26
+#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25
+#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24
+#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8
+#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4
+#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2
+#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0
+
+//U3D_reg2
+#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31
+#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24
+#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22
+#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21
+#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20
+#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19
+#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18
+#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17
+#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14
+#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13
+#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12
+#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11
+#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10
+#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9
+#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8
+
+//U3D_reg3
+#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16
+
+//U3D_reg4
+#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1
+
+//U3D_reg5
+#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29
+#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28
+#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27
+#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26
+#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25
+#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24
+#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23
+#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22
+#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21
+#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20
+#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0
+
+//U3D_reg6
+#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31
+#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30
+#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24
+#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23
+#define RG_SSUSB_TX_SR (0x7<<20) //22:20
+#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16
+#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14
+#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12
+#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11
+#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8
+#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7
+#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6
+#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5
+#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4
+
+//U3D_reg7
+#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12
+#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10
+#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8
+#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7
+#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6
+#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5
+#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4
+#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3
+#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2
+#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1
+#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0
+
+//U3D_reg8
+#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0
+
+//U3D_reg9
+#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16
+#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0
+
+//U3D_regA
+#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31
+#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30
+#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29
+#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28
+#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21
+#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20
+#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17
+#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16
+#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15
+#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14
+#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13
+#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12
+#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11
+#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9
+#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8
+#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6
+#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4
+#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3
+#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2
+#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1
+#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0
+
+//U3D_regB
+#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31
+#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29
+#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26
+#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25
+#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24
+#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19
+#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18
+#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17
+#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14
+#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12
+#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7
+#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5
+#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3
+#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2
+
+//U3D_regC
+#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28
+#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16
+#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8
+#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0
+
+//U3D_redD
+#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8
+#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0
+
+//U3D_regE
+#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4
+#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3
+#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2
+#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1
+#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0
+
+
+/* OFFSET */
+
+//U3D_reg0
+#define RG_SSUSB_BGR_EN_OFST (31)
+#define RG_SSUSB_CHPEN_OFST (30)
+#define RG_SSUSB_BG_DIV_OFST (28)
+#define RG_SSUSB_INTR_EN_OFST (26)
+#define RG_SSUSB_MPX_OUT_SEL_OFST (24)
+#define RG_SSUSB_MPX_SEL_OFST (16)
+#define RG_SSUSB_REF_EN_OFST (15)
+#define RG_SSUSB_VRT_VREF_SEL_OFST (11)
+#define RG_SSUSB_BG_RASEL_OFST (9)
+#define RG_SSUSB_BG_RBSEL_OFST (7)
+#define RG_SSUSB_BG_MONEN_OFST (6)
+#define RG_PCIE_CLKDRV_OFFSET_OFST (0)
+
+//U3D_reg1
+#define RG_PCIE_CLKDRV_SLEW_OFST (30)
+#define RG_PCIE_CLKDRV_AMP_OFST (27)
+#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26)
+#define RG_SSUSB_XTAL_MON_EN_OFST (25)
+#define RG_SSUSB_XTAL_HYS_OFST (24)
+#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8)
+#define RG_SSUSB_SYSPLL_RESERVE_OFST (4)
+#define RG_SSUSB_SYSPLL_FBSEL_OFST (2)
+#define RG_SSUSB_SYSPLL_PREDIV_OFST (0)
+
+//U3D_reg2
+#define RG_SSUSB_SYSPLL_LF_OFST (31)
+#define RG_SSUSB_SYSPLL_FBDIV_OFST (24)
+#define RG_SSUSB_SYSPLL_POSDIV_OFST (22)
+#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21)
+#define RG_SSUSB_SYSPLL_BLP_OFST (20)
+#define RG_SSUSB_SYSPLL_BP_OFST (19)
+#define RG_SSUSB_SYSPLL_BR_OFST (18)
+#define RG_SSUSB_SYSPLL_BC_OFST (17)
+#define RG_SSUSB_SYSPLL_DIVEN_OFST (14)
+#define RG_SSUSB_SYSPLL_FPEN_OFST (13)
+#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12)
+#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11)
+#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10)
+#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9)
+#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8)
+
+//U3D_reg3
+#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16)
+
+//U3D_reg4
+#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1)
+
+//U3D_reg5
+#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29)
+#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28)
+#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27)
+#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26)
+#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25)
+#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24)
+#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23)
+#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22)
+#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21)
+#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20)
+#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0)
+
+//U3D_reg6
+#define RG_SSUSB_TX250MCK_INVB_OFST (31)
+#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30)
+#define RG_SSUSB_IDRV_CALIB_OFST (24)
+#define RG_SSUSB_TX_R50_FON_OFST (23)
+#define RG_SSUSB_TX_SR_OFST (20)
+#define RG_SSUSB_TX_EIDLE_CM_OFST (16)
+#define RG_SSUSB_RXDET_RSEL_OFST (14)
+#define RG_SSUSB_RXDET_VTHSEL_OFST (12)
+#define RG_SSUSB_CKMON_EN_OFST (11)
+#define RG_SSUSB_CKMON_SEL_OFST (8)
+#define RG_SSUSB_TX_VLMON_EN_OFST (7)
+#define RG_SSUSB_TX_VLMON_SEL_OFST (6)
+#define RG_SSUSB_RXLBTX_EN_OFST (5)
+#define RG_SSUSB_TXLBRX_EN_OFST (4)
+
+//U3D_reg7
+#define RG_SSUSB_RESERVE_OFST (12)
+#define RG_SSUSB_PLL_CKCTRL_OFST (10)
+#define RG_SSUSB_PLL_POSDIV_OFST (8)
+#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7)
+#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6)
+#define RG_SSUSB_PLL_EP_EN_OFST (5)
+#define RG_SSUSB_PLL_VOD_EN_OFST (4)
+#define RG_SSUSB_PLL_V11_EN_OFST (3)
+#define RG_SSUSB_PLL_MONREF_EN_OFST (2)
+#define RG_SSUSB_PLL_MONCK_EN_OFST (1)
+#define RG_SSUSB_PLL_MONVC_EN_OFST (0)
+
+//U3D_reg8
+#define RG_SSUSB_PLL_RESERVE_OFST (0)
+
+//U3D_reg9
+#define RG_SSUSB_PLL_DDS_DMY_OFST (16)
+#define RG_SSUSB_PLL_SSC_PRD_OFST (0)
+
+//U3D_regA
+#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31)
+#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30)
+#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29)
+#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28)
+#define RG_SSUSB_PLL_DDS_VADJ_OFST (21)
+#define RG_SSUSB_PLL_DDS_MONEN_OFST (20)
+#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17)
+#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16)
+#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15)
+#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14)
+#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13)
+#define RG_SSUSB_CDR_OSCDET_EN_OFST (12)
+#define RG_SSUSB_CDR_MONMUX_OFST (11)
+#define RG_SSUSB_CDR_CKCTRL_OFST (9)
+#define RG_SSUSB_CDR_ACCEN_OFST (8)
+#define RG_SSUSB_CDR_BYPASS_OFST (6)
+#define RG_SSUSB_CDR_PI_SLEW_OFST (4)
+#define RG_SSUSB_CDR_EPEN_OFST (3)
+#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2)
+#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1)
+#define RG_SSUSB_CDR_MONEN_OFST (0)
+
+//U3D_regB
+#define RG_SSUSB_CDR_MONEN_DIG_OFST (31)
+#define RG_SSUSB_CDR_REGOD_OFST (29)
+#define RG_SSUSB_RX_DAC_EN_OFST (26)
+#define RG_SSUSB_RX_DAC_PWD_OFST (25)
+#define RG_SSUSB_EQ_CURSEL_OFST (24)
+#define RG_SSUSB_RX_DAC_MUX_OFST (19)
+#define RG_SSUSB_RX_R2T_EN_OFST (18)
+#define RG_SSUSB_RX_T2R_EN_OFST (17)
+#define RG_SSUSB_RX_50_LOWER_OFST (14)
+#define RG_SSUSB_RX_50_TAR_OFST (12)
+#define RG_SSUSB_RX_SW_CTRL_OFST (7)
+#define RG_PCIE_SIGDET_VTH_OFST (5)
+#define RG_PCIE_SIGDET_LPF_OFST (3)
+#define RG_SSUSB_LFPS_MON_EN_OFST (2)
+
+//U3D_regC
+#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28)
+#define RG_SSUSB_CDR_RESERVE_OFST (16)
+#define RG_SSUSB_RXAFE_RESERVE_OFST (8)
+#define RG_PCIE_RX_RESERVE_OFST (0)
+
+//U3D_redD
+#define RGS_SSUSB_CDR_NO_OSC_OFST (8)
+#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0)
+
+//U3D_regE
+#define RG_SSUSB_INT_BIAS_SEL_OFST (4)
+#define RG_SSUSB_EXT_BIAS_SEL_OFST (3)
+#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2)
+#define RG_SSUSB_RX_PD_RST_OFST (1)
+#define RG_SSUSB_RX_PD_RST_PASS_OFST (0)
+
+///////////////////////////////////////////////////////////////////////////////
+
+struct u3phya_da_reg {
+ //0x0
+ PHY_LE32 reg0;
+ PHY_LE32 reg1;
+ PHY_LE32 reg4;
+ PHY_LE32 reg5;
+ //0x10
+ PHY_LE32 reg6;
+ PHY_LE32 reg7;
+ PHY_LE32 reg8;
+ PHY_LE32 reg9;
+ //0x20
+ PHY_LE32 reg10;
+ PHY_LE32 reg12;
+ PHY_LE32 reg13;
+ PHY_LE32 reg14;
+ //0x30
+ PHY_LE32 reg15;
+ PHY_LE32 reg16;
+ PHY_LE32 reg19;
+ PHY_LE32 reg20;
+ //0x40
+ PHY_LE32 reg21;
+ PHY_LE32 reg23;
+ PHY_LE32 reg25;
+ PHY_LE32 reg26;
+ //0x50
+ PHY_LE32 reg28;
+ PHY_LE32 reg29;
+ PHY_LE32 reg30;
+ PHY_LE32 reg31;
+ //0x60
+ PHY_LE32 reg32;
+ PHY_LE32 reg33;
+};
+
+//U3D_reg0
+#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24
+#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23
+#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22
+#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21
+#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20
+#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18
+#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16
+#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14
+#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12
+#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10
+#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8
+#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6
+#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4
+#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2
+#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0
+
+//U3D_reg1
+#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30
+#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29
+#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28
+#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27
+#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26
+#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25
+#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24
+#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18
+#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17
+#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16
+#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8
+#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3
+#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2
+#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1
+#define RG_PCIE_MODE_U3 (0x1<<0) //0:0
+
+//U3D_reg4
+#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22
+#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19
+#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16
+#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13
+#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10
+#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8
+#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6
+#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4
+#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2
+#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0
+
+//U3D_reg5
+#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27
+#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24
+#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21
+#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18
+#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15
+#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12
+#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9
+#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6
+#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3
+#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0
+
+//U3D_reg6
+#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24
+#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16
+#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8
+#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4
+#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0
+
+//U3D_reg7
+#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24
+#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16
+#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8
+#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4
+#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0
+
+//U3D_reg8
+#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24
+#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16
+#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8
+#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2
+#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0
+
+//U3D_reg9
+#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24
+#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16
+#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8
+#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0
+
+//U3D_reg10
+#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26
+#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24
+#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18
+#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16
+#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8
+#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0
+
+//U3D_reg12
+#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0
+
+//U3D_reg13
+#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0
+
+//U3D_reg14
+#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0
+
+//U3D_reg15
+#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0
+
+//U3D_reg16
+#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0
+
+//U3D_reg19
+#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16
+#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0
+
+//U3D_reg20
+#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16
+#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0
+
+//U3D_reg21
+#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16
+#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0
+
+//U3D_reg23
+#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16
+#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0
+
+//U3D_reg25
+#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16
+#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0
+
+//U3D_reg26
+#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25
+#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24
+#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16
+#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8
+#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0
+
+//U3D_reg28
+#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24
+#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16
+#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10
+#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8
+#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0
+
+//U3D_reg29
+#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24
+#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16
+#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6
+#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3
+#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0
+
+//U3D_reg30
+#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24
+#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16
+#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6
+#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3
+#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0
+
+//U3D_reg31
+#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24
+#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16
+#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8
+#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0
+
+//U3D_reg32
+#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30
+#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28
+#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26
+#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24
+#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22
+#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20
+#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18
+#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16
+#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14
+#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12
+#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11
+#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10
+#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9
+#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8
+#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7
+#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0
+
+//U3D_reg33
+#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26
+#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25
+#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24
+#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23
+#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16
+#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8
+#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6
+#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4
+#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2
+#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0
+
+
+/* OFFSET */
+
+//U3D_reg0
+#define RG_PCIE_SPEED_PE2D_OFST (24)
+#define RG_PCIE_SPEED_PE2H_OFST (23)
+#define RG_PCIE_SPEED_PE1D_OFST (22)
+#define RG_PCIE_SPEED_PE1H_OFST (21)
+#define RG_PCIE_SPEED_U3_OFST (20)
+#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18)
+#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16)
+#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14)
+#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12)
+#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10)
+#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8)
+#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6)
+#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4)
+#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2)
+#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0)
+
+//U3D_reg1
+#define RG_USB20_REFCK_SEL_PE2D_OFST (30)
+#define RG_USB20_REFCK_SEL_PE2H_OFST (29)
+#define RG_USB20_REFCK_SEL_PE1D_OFST (28)
+#define RG_USB20_REFCK_SEL_PE1H_OFST (27)
+#define RG_USB20_REFCK_SEL_U3_OFST (26)
+#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25)
+#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24)
+#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18)
+#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17)
+#define RG_PCIE_REFCK_DIV4_U3_OFST (16)
+#define RG_PCIE_MODE_PE2D_OFST (8)
+#define RG_PCIE_MODE_PE2H_OFST (3)
+#define RG_PCIE_MODE_PE1D_OFST (2)
+#define RG_PCIE_MODE_PE1H_OFST (1)
+#define RG_PCIE_MODE_U3_OFST (0)
+
+//U3D_reg4
+#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22)
+#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19)
+#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16)
+#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13)
+#define RG_SSUSB_PLL_DIVEN_U3_OFST (10)
+#define RG_SSUSB_PLL_BC_PE2D_OFST (8)
+#define RG_SSUSB_PLL_BC_PE2H_OFST (6)
+#define RG_SSUSB_PLL_BC_PE1D_OFST (4)
+#define RG_SSUSB_PLL_BC_PE1H_OFST (2)
+#define RG_SSUSB_PLL_BC_U3_OFST (0)
+
+//U3D_reg5
+#define RG_SSUSB_PLL_BR_PE2D_OFST (27)
+#define RG_SSUSB_PLL_BR_PE2H_OFST (24)
+#define RG_SSUSB_PLL_BR_PE1D_OFST (21)
+#define RG_SSUSB_PLL_BR_PE1H_OFST (18)
+#define RG_SSUSB_PLL_BR_U3_OFST (15)
+#define RG_SSUSB_PLL_IC_PE2D_OFST (12)
+#define RG_SSUSB_PLL_IC_PE2H_OFST (9)
+#define RG_SSUSB_PLL_IC_PE1D_OFST (6)
+#define RG_SSUSB_PLL_IC_PE1H_OFST (3)
+#define RG_SSUSB_PLL_IC_U3_OFST (0)
+
+//U3D_reg6
+#define RG_SSUSB_PLL_IR_PE2D_OFST (24)
+#define RG_SSUSB_PLL_IR_PE2H_OFST (16)
+#define RG_SSUSB_PLL_IR_PE1D_OFST (8)
+#define RG_SSUSB_PLL_IR_PE1H_OFST (4)
+#define RG_SSUSB_PLL_IR_U3_OFST (0)
+
+//U3D_reg7
+#define RG_SSUSB_PLL_BP_PE2D_OFST (24)
+#define RG_SSUSB_PLL_BP_PE2H_OFST (16)
+#define RG_SSUSB_PLL_BP_PE1D_OFST (8)
+#define RG_SSUSB_PLL_BP_PE1H_OFST (4)
+#define RG_SSUSB_PLL_BP_U3_OFST (0)
+
+//U3D_reg8
+#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24)
+#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16)
+#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8)
+#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2)
+#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0)
+
+//U3D_reg9
+#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24)
+#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16)
+#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8)
+#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0)
+
+//U3D_reg10
+#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26)
+#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24)
+#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18)
+#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16)
+#define RG_SSUSB_PLL_PREDIV_U3_OFST (8)
+#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0)
+
+//U3D_reg12
+#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0)
+
+//U3D_reg13
+#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0)
+
+//U3D_reg14
+#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0)
+
+//U3D_reg15
+#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0)
+
+//U3D_reg16
+#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0)
+
+//U3D_reg19
+#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16)
+#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0)
+
+//U3D_reg20
+#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16)
+#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0)
+
+//U3D_reg21
+#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16)
+#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0)
+
+//U3D_reg23
+#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16)
+#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0)
+
+//U3D_reg25
+#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16)
+#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0)
+
+//U3D_reg26
+#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25)
+#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24)
+#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16)
+#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8)
+#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0)
+
+//U3D_reg28
+#define RG_SSUSB_CDR_BPA_PE2D_OFST (24)
+#define RG_SSUSB_CDR_BPA_PE2H_OFST (16)
+#define RG_SSUSB_CDR_BPA_PE1D_OFST (10)
+#define RG_SSUSB_CDR_BPA_PE1H_OFST (8)
+#define RG_SSUSB_CDR_BPA_U3_OFST (0)
+
+//U3D_reg29
+#define RG_SSUSB_CDR_BPB_PE2D_OFST (24)
+#define RG_SSUSB_CDR_BPB_PE2H_OFST (16)
+#define RG_SSUSB_CDR_BPB_PE1D_OFST (6)
+#define RG_SSUSB_CDR_BPB_PE1H_OFST (3)
+#define RG_SSUSB_CDR_BPB_U3_OFST (0)
+
+//U3D_reg30
+#define RG_SSUSB_CDR_BR_PE2D_OFST (24)
+#define RG_SSUSB_CDR_BR_PE2H_OFST (16)
+#define RG_SSUSB_CDR_BR_PE1D_OFST (6)
+#define RG_SSUSB_CDR_BR_PE1H_OFST (3)
+#define RG_SSUSB_CDR_BR_U3_OFST (0)
+
+//U3D_reg31
+#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24)
+#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16)
+#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8)
+#define RG_SSUSB_CDR_FBDIV_U3_OFST (0)
+
+//U3D_reg32
+#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30)
+#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28)
+#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26)
+#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24)
+#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22)
+#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20)
+#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18)
+#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16)
+#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14)
+#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12)
+#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11)
+#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10)
+#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9)
+#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8)
+#define RG_SSUSB_CDR_KVSEL_U3_OFST (7)
+#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0)
+
+//U3D_reg33
+#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26)
+#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25)
+#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24)
+#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23)
+#define RG_SSUSB_RX_CMPWD_U3_OFST (16)
+#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8)
+#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6)
+#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4)
+#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2)
+#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0)
+
+
+///////////////////////////////////////////////////////////////////////////////
+
+struct u3phyd_reg {
+ //0x0
+ PHY_LE32 phyd_mix0;
+ PHY_LE32 phyd_mix1;
+ PHY_LE32 phyd_lfps0;
+ PHY_LE32 phyd_lfps1;
+ //0x10
+ PHY_LE32 phyd_impcal0;
+ PHY_LE32 phyd_impcal1;
+ PHY_LE32 phyd_txpll0;
+ PHY_LE32 phyd_txpll1;
+ //0x20
+ PHY_LE32 phyd_txpll2;
+ PHY_LE32 phyd_fl0;
+ PHY_LE32 phyd_mix2;
+ PHY_LE32 phyd_rx0;
+ //0x30
+ PHY_LE32 phyd_t2rlb;
+ PHY_LE32 phyd_cppat;
+ PHY_LE32 phyd_mix3;
+ PHY_LE32 phyd_ebufctl;
+ //0x40
+ PHY_LE32 phyd_pipe0;
+ PHY_LE32 phyd_pipe1;
+ PHY_LE32 phyd_mix4;
+ PHY_LE32 phyd_ckgen0;
+ //0x50
+ PHY_LE32 phyd_mix5;
+ PHY_LE32 phyd_reserved;
+ PHY_LE32 phyd_cdr0;
+ PHY_LE32 phyd_cdr1;
+ //0x60
+ PHY_LE32 phyd_pll_0;
+ PHY_LE32 phyd_pll_1;
+ PHY_LE32 phyd_bcn_det_1;
+ PHY_LE32 phyd_bcn_det_2;
+ //0x70
+ PHY_LE32 eq0;
+ PHY_LE32 eq1;
+ PHY_LE32 eq2;
+ PHY_LE32 eq3;
+ //0x80
+ PHY_LE32 eq_eye0;
+ PHY_LE32 eq_eye1;
+ PHY_LE32 eq_eye2;
+ PHY_LE32 eq_dfe0;
+ //0x90
+ PHY_LE32 eq_dfe1;
+ PHY_LE32 eq_dfe2;
+ PHY_LE32 eq_dfe3;
+ PHY_LE32 reserve0;
+ //0xa0
+ PHY_LE32 phyd_mon0;
+ PHY_LE32 phyd_mon1;
+ PHY_LE32 phyd_mon2;
+ PHY_LE32 phyd_mon3;
+ //0xb0
+ PHY_LE32 phyd_mon4;
+ PHY_LE32 phyd_mon5;
+ PHY_LE32 phyd_mon6;
+ PHY_LE32 phyd_mon7;
+ //0xc0
+ PHY_LE32 phya_rx_mon0;
+ PHY_LE32 phya_rx_mon1;
+ PHY_LE32 phya_rx_mon2;
+ PHY_LE32 phya_rx_mon3;
+ //0xd0
+ PHY_LE32 phya_rx_mon4;
+ PHY_LE32 phya_rx_mon5;
+ PHY_LE32 phyd_cppat2;
+ PHY_LE32 eq_eye3;
+ //0xe0
+ PHY_LE32 kband_out;
+ PHY_LE32 kband_out1;
+};
+
+//U3D_PHYD_MIX0
+#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31
+#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30
+#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29
+#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28
+#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27
+#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24
+#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16
+#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15
+#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14
+#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13
+#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12
+#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8
+#define RG_SSUSB_COMCNT (0xf<<4) //7:4
+#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0
+
+//U3D_PHYD_MIX1
+#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31
+#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28
+#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24
+#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23
+#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22
+#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16
+#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15
+#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14
+#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8
+#define RG_SSUSB_BERT_EN (0x1<<7) //7:7
+#define RG_SSUSB_SCP_TH (0x7<<4) //6:4
+#define RG_SSUSB_SCP_EN (0x1<<3) //3:3
+#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0
+
+//U3D_PHYD_LFPS0
+#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30
+#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29
+#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24
+#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23
+#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22
+#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20
+#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16
+#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15
+#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14
+#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13
+#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8
+#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7
+#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6
+#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5
+#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0
+
+//U3D_PHYD_LFPS1
+#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28
+#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24
+#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16
+#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8
+#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0
+
+//U3D_PHYD_IMPCAL0
+#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31
+#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30
+#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29
+#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24
+#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16
+#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10
+#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
+
+//U3D_PHYD_IMPCAL1
+#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31
+#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30
+#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29
+#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24
+#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16
+#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10
+#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0
+
+//U3D_PHYD_TXPLL0
+#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27
+#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26
+#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25
+#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16
+#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12
+#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10
+#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0
+
+//U3D_PHYD_TXPLL1
+#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31
+#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30
+#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28
+#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27
+#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26
+#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25
+#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24
+#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23
+#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22
+#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16
+#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15
+#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14
+#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13
+#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12
+#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11
+#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9
+#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8
+#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7
+#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6
+#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5
+#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4
+#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3
+#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2
+
+//U3D_PHYD_TXPLL2
+#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31
+#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30
+#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29
+#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28
+#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27
+#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26
+#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25
+#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24
+#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16
+#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11
+#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10
+#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9
+#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8
+#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7
+#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6
+#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0
+
+//U3D_PHYD_FL0
+#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16
+#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0
+
+//U3D_PHYD_MIX2
+#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31
+#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30
+#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29
+#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24
+#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18
+#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16
+#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8
+#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0
+
+//U3D_PHYD_RX0
+#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24
+#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16
+#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15
+#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14
+#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13
+#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11
+#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10
+#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9
+#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8
+#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7
+#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6
+#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5
+#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4
+#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3
+#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2
+#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1
+#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0
+
+//U3D_PHYD_T2RLB
+#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28
+#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27
+#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26
+#define RG_SSUSB_VALID_EN (0x1<<25) //25:25
+#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24
+#define RG_SSUSB_K_EMP (0xf<<20) //23:20
+#define RG_SSUSB_K_FUL (0xf<<16) //19:16
+#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12
+#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10
+#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8
+#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0
+
+//U3D_PHYD_CPPAT
+#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24
+#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21
+#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20
+#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16
+#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8
+#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0
+
+//U3D_PHYD_MIX3
+#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31
+#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30
+#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28
+#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24
+#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23
+#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20
+#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19
+#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16
+#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15
+#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14
+#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13
+#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12
+#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11
+#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0
+
+//U3D_PHYD_EBUFCTL
+#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0
+
+//U3D_PHYD_PIPE0
+#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30
+#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29
+#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28
+#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26
+#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24
+#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23
+#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22
+#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21
+#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20
+#define RG_SSUSB_TXDATAK (0xf<<16) //19:16
+#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15
+#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14
+#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13
+#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12
+#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4
+#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1
+#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0
+
+//U3D_PHYD_PIPE1
+#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0
+
+//U3D_PHYD_MIX4
+#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24
+#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16
+#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0
+
+//U3D_PHYD_CKGEN0
+#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27
+#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24
+#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8
+#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0
+
+//U3D_PHYD_MIX5
+#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16
+#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0
+
+//U3D_PHYD_RESERVED
+#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0
+//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11)
+//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12)
+//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9)
+//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10)
+
+//U3D_PHYD_CDR0
+#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28
+#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24
+#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16
+#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8
+#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0
+
+//U3D_PHYD_CDR1
+#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24
+#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16
+#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8
+#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6
+#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0
+
+//U3D_PHYD_PLL_0
+#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28
+#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27
+#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26
+#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25
+#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15
+#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5
+#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4
+#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3
+#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2
+#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1
+#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0
+
+//U3D_PHYD_PLL_1
+#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
+#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
+#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
+#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
+
+//U3D_PHYD_BCN_DET_1
+#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16
+#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0
+
+//U3D_PHYD_BCN_DET_2
+#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16
+#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12
+#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0
+
+//U3D_EQ0
+#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24
+#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16
+#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8
+#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0
+
+//U3D_EQ1
+#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24
+#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16
+#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8
+#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0
+
+//U3D_EQ2
+#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24
+#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16
+#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14
+#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11
+#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8
+#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6
+#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3
+#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0
+
+//U3D_EQ3
+#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28
+#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24
+#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16
+#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8
+#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7
+#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0
+
+//U3D_EQ_EYE0
+#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25
+#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24
+#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16
+#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8
+#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7
+#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4
+#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3
+
+//U3D_EQ_EYE1
+#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24
+#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7
+
+//U3D_EQ_EYE2
+#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31
+#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24
+#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22
+#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16
+
+//U3D_EQ_DFE0
+#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28
+#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27
+#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24
+#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23
+#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16
+#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8
+#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0
+
+//U3D_EQ_DFE1
+#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16
+#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12
+#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8
+#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7
+#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6
+#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4
+#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2
+#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1
+#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0
+
+//U3D_EQ_DFE2
+#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24
+#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16
+#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8
+#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0
+
+//U3D_EQ_DFE3
+#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0
+
+//U3D_PHYD_MON0
+#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16
+#define RGS_SSUSB_LFPS (0xf<<12) //15:12
+#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8
+#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0
+
+//U3D_PHYD_MON1
+#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0
+
+//U3D_PHYD_MON2
+#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16
+#define RGS_SSUSB_RETRACK (0xf<<12) //15:12
+#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10
+#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9
+#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8
+#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0
+
+//U3D_PHYD_MON3
+#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16
+#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0
+
+//U3D_PHYD_MON4
+#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24
+#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16
+#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0
+
+//U3D_PHYD_MON5
+#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16
+#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15
+#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14
+#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13
+#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12
+#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11
+#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10
+#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9
+#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8
+#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6
+#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5
+#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4
+#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3
+#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2
+#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1
+#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0
+
+//U3D_PHYD_MON6
+#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30
+#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29
+#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24
+#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16
+#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8
+#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4
+#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0
+
+//U3D_PHYD_MON7
+#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8
+#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0
+
+//U3D_PHYA_RX_MON0
+#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24
+#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16
+#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8
+#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0
+
+//U3D_PHYA_RX_MON1
+#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24
+#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16
+#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8
+#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0
+
+//U3D_PHYA_RX_MON2
+#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31
+#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24
+#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16
+#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8
+#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0
+
+//U3D_PHYA_RX_MON3
+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0
+
+//U3D_PHYA_RX_MON4
+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0
+
+//U3D_PHYA_RX_MON5
+#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8
+#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7
+#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0
+
+//U3D_PHYD_CPPAT2
+#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16
+#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8
+#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0
+
+//U3D_EQ_EYE3
+#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24
+#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0
+
+//U3D_KBAND_OUT
+#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24
+#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16
+#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8
+#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0
+
+//U3D_KBAND_OUT1
+#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24
+#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16
+#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8
+#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0
+
+
+/* OFFSET */
+
+//U3D_PHYD_MIX0
+#define RG_SSUSB_P_P3_TX_NG_OFST (31)
+#define RG_SSUSB_TSEQ_EN_OFST (30)
+#define RG_SSUSB_TSEQ_POLEN_OFST (29)
+#define RG_SSUSB_TSEQ_POL_OFST (28)
+#define RG_SSUSB_P_P3_PCLK_NG_OFST (27)
+#define RG_SSUSB_TSEQ_TH_OFST (24)
+#define RG_SSUSB_PRBS_BERTH_OFST (16)
+#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15)
+#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14)
+#define RG_SSUSB_PRBS_EN_OFST (13)
+#define RG_SSUSB_BPSLOCK_OFST (12)
+#define RG_SSUSB_RTCOMCNT_OFST (8)
+#define RG_SSUSB_COMCNT_OFST (4)
+#define RG_SSUSB_PRBSEL_CALIB_OFST (0)
+
+//U3D_PHYD_MIX1
+#define RG_SSUSB_SLEEP_EN_OFST (31)
+#define RG_SSUSB_PRBSEL_PCS_OFST (28)
+#define RG_SSUSB_TXLFPS_PRD_OFST (24)
+#define RG_SSUSB_P_RX_P0S_CK_OFST (23)
+#define RG_SSUSB_P_TX_P0S_CK_OFST (22)
+#define RG_SSUSB_PDNCTL_OFST (16)
+#define RG_SSUSB_TX_DRV_EN_OFST (15)
+#define RG_SSUSB_TX_DRV_SEL_OFST (14)
+#define RG_SSUSB_TX_DRV_DLY_OFST (8)
+#define RG_SSUSB_BERT_EN_OFST (7)
+#define RG_SSUSB_SCP_TH_OFST (4)
+#define RG_SSUSB_SCP_EN_OFST (3)
+#define RG_SSUSB_RXANSIDEC_TEST_OFST (0)
+
+//U3D_PHYD_LFPS0
+#define RG_SSUSB_LFPS_PWD_OFST (30)
+#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29)
+#define RG_SSUSB_RXLFPS_OVF_OFST (24)
+#define RG_SSUSB_P3_ENTRY_SEL_OFST (23)
+#define RG_SSUSB_P3_ENTRY_OFST (22)
+#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20)
+#define RG_SSUSB_RXLFPS_CDRTH_OFST (16)
+#define RG_SSUSB_LOCK5G_BLOCK_OFST (15)
+#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14)
+#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13)
+#define RG_SSUSB_RXLFPS_LOB_OFST (8)
+#define RG_SSUSB_TXLFPS_EN_OFST (7)
+#define RG_SSUSB_TXLFPS_SEL_OFST (6)
+#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5)
+#define RG_SSUSB_RXLFPS_UPB_OFST (0)
+
+//U3D_PHYD_LFPS1
+#define RG_SSUSB_RX_IMP_BIAS_OFST (28)
+#define RG_SSUSB_TX_IMP_BIAS_OFST (24)
+#define RG_SSUSB_FWAKE_TH_OFST (16)
+#define RG_SSUSB_RXLFPS_UDF_OFST (8)
+#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0)
+
+//U3D_PHYD_IMPCAL0
+#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31)
+#define RG_SSUSB_TX_IMPCAL_EN_OFST (30)
+#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29)
+#define RG_SSUSB_TX_IMPSEL_OFST (24)
+#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16)
+#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10)
+#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0)
+
+//U3D_PHYD_IMPCAL1
+#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31)
+#define RG_SSUSB_RX_IMPCAL_EN_OFST (30)
+#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29)
+#define RG_SSUSB_RX_IMPSEL_OFST (24)
+#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16)
+#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10)
+#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0)
+
+//U3D_PHYD_TXPLL0
+#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27)
+#define RG_SSUSB_TXPLL_ON_OFST (26)
+#define RG_SSUSB_FORCE_TXPLLON_OFST (25)
+#define RG_SSUSB_TXPLL_STBCYC_OFST (16)
+#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12)
+#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10)
+#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0)
+
+//U3D_PHYD_TXPLL1
+#define RG_SSUSB_PLL_NCPO_EN_OFST (31)
+#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30)
+#define RG_SSUSB_PLL_NCPO_CHG_OFST (28)
+#define RG_SSUSB_PLL_DDS_RSTB_OFST (27)
+#define RG_SSUSB_PLL_DDS_PWDB_OFST (26)
+#define RG_SSUSB_PLL_DDSEN_OFST (25)
+#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24)
+#define RG_SSUSB_PLL_PWD_OFST (23)
+#define RG_SSUSB_RX_AFE_PWD_OFST (22)
+#define RG_SSUSB_PLL_TCADJ_OFST (16)
+#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15)
+#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14)
+#define RG_SSUSB_FORCE_CDR_PWD_OFST (13)
+#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12)
+#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11)
+#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9)
+#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8)
+#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7)
+#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6)
+#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5)
+#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4)
+#define RG_SSUSB_FORCE_PLL_PWD_OFST (3)
+#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2)
+
+//U3D_PHYD_TXPLL2
+#define RG_SSUSB_TX_LFPS_EN_OFST (31)
+#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30)
+#define RG_SSUSB_TX_LFPS_OFST (29)
+#define RG_SSUSB_FORCE_TX_LFPS_OFST (28)
+#define RG_SSUSB_RXPLL_STB_OFST (27)
+#define RG_SSUSB_TXPLL_STB_OFST (26)
+#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25)
+#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24)
+#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16)
+#define RG_SSUSB_RXPLL_STBMODE_OFST (11)
+#define RG_SSUSB_RXPLL_ON_OFST (10)
+#define RG_SSUSB_FORCE_RXPLLON_OFST (9)
+#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8)
+#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7)
+#define RG_SSUSB_CDR_PWD_OFST (6)
+#define RG_SSUSB_CDR_TCADJ_OFST (0)
+
+//U3D_PHYD_FL0
+#define RG_SSUSB_RX_FL_TARGET_OFST (16)
+#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0)
+
+//U3D_PHYD_MIX2
+#define RG_SSUSB_RX_EQ_RST_OFST (31)
+#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30)
+#define RG_SSUSB_RXVAL_RST_OFST (29)
+#define RG_SSUSB_RXVAL_CNT_OFST (24)
+#define RG_SSUSB_CDROS_EN_OFST (18)
+#define RG_SSUSB_CDR_LCKOP_OFST (16)
+#define RG_SSUSB_RX_FL_LOCKTH_OFST (8)
+#define RG_SSUSB_RX_FL_OFFSET_OFST (0)
+
+//U3D_PHYD_RX0
+#define RG_SSUSB_T2RLB_BERTH_OFST (24)
+#define RG_SSUSB_T2RLB_PAT_OFST (16)
+#define RG_SSUSB_T2RLB_EN_OFST (15)
+#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14)
+#define RG_SSUSB_T2RLB_SERIAL_OFST (13)
+#define RG_SSUSB_T2RLB_MODE_OFST (11)
+#define RG_SSUSB_RX_SAOSC_EN_OFST (10)
+#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9)
+#define RG_SSUSB_RX_DFE_OPTION_OFST (8)
+#define RG_SSUSB_RX_DFE_EN_OFST (7)
+#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6)
+#define RG_SSUSB_RX_EQ_EN_OFST (5)
+#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4)
+#define RG_SSUSB_RX_SAOSC_RST_OFST (3)
+#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2)
+#define RG_SSUSB_RX_DFE_RST_OFST (1)
+#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0)
+
+//U3D_PHYD_T2RLB
+#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28)
+#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27)
+#define RG_SSUSB_BPANSIENC_OFST (26)
+#define RG_SSUSB_VALID_EN_OFST (25)
+#define RG_SSUSB_EBUF_SRST_OFST (24)
+#define RG_SSUSB_K_EMP_OFST (20)
+#define RG_SSUSB_K_FUL_OFST (16)
+#define RG_SSUSB_T2RLB_BDATRST_OFST (12)
+#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10)
+#define RG_SSUSB_T2RLB_PATMODE_OFST (8)
+#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0)
+
+//U3D_PHYD_CPPAT
+#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24)
+#define RG_SSUSB_CPPAT_TOZ_OFST (21)
+#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20)
+#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16)
+#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8)
+#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0)
+
+//U3D_PHYD_MIX3
+#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31)
+#define RG_SSUSB_P_CDROS_EN_OFST (30)
+#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28)
+#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24)
+#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23)
+#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20)
+#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19)
+#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16)
+#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15)
+#define RG_SSUSB_PLL_SSCEN_OFST (14)
+#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13)
+#define RG_SSUSB_CDR_PI_PWD_OFST (12)
+#define RG_SSUSB_CDR_PI_MODE_OFST (11)
+#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0)
+
+//U3D_PHYD_EBUFCTL
+#define RG_SSUSB_EBUFCTL_OFST (0)
+
+//U3D_PHYD_PIPE0
+#define RG_SSUSB_RXTERMINATION_OFST (30)
+#define RG_SSUSB_RXEQTRAINING_OFST (29)
+#define RG_SSUSB_RXPOLARITY_OFST (28)
+#define RG_SSUSB_TXDEEMPH_OFST (26)
+#define RG_SSUSB_POWERDOWN_OFST (24)
+#define RG_SSUSB_TXONESZEROS_OFST (23)
+#define RG_SSUSB_TXELECIDLE_OFST (22)
+#define RG_SSUSB_TXDETECTRX_OFST (21)
+#define RG_SSUSB_PIPE_SEL_OFST (20)
+#define RG_SSUSB_TXDATAK_OFST (16)
+#define RG_SSUSB_CDR_STABLE_SEL_OFST (15)
+#define RG_SSUSB_CDR_STABLE_OFST (14)
+#define RG_SSUSB_CDR_RSTB_SEL_OFST (13)
+#define RG_SSUSB_CDR_RSTB_OFST (12)
+#define RG_SSUSB_P_ERROR_SEL_OFST (4)
+#define RG_SSUSB_TXMARGIN_OFST (1)
+#define RG_SSUSB_TXCOMPLIANCE_OFST (0)
+
+//U3D_PHYD_PIPE1
+#define RG_SSUSB_TXDATA_OFST (0)
+
+//U3D_PHYD_MIX4
+#define RG_SSUSB_CDROS_CNT_OFST (24)
+#define RG_SSUSB_T2RLB_BER_EN_OFST (16)
+#define RG_SSUSB_T2RLB_BER_RATE_OFST (0)
+
+//U3D_PHYD_CKGEN0
+#define RG_SSUSB_RFIFO_IMPLAT_OFST (27)
+#define RG_SSUSB_TFIFO_PSEL_OFST (24)
+#define RG_SSUSB_CKGEN_PSEL_OFST (8)
+#define RG_SSUSB_RXCK_INV_OFST (0)
+
+//U3D_PHYD_MIX5
+#define RG_SSUSB_PRB_SEL_OFST (16)
+#define RG_SSUSB_RXPLL_STBCYC_OFST (0)
+
+//U3D_PHYD_RESERVED
+#define RG_SSUSB_PHYD_RESERVE_OFST (0)
+//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11)
+//#define RG_SSUSB_RX_SIGDET_EN_OFST (12)
+//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9)
+//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10)
+
+//U3D_PHYD_CDR0
+#define RG_SSUSB_CDR_BIC_LTR_OFST (28)
+#define RG_SSUSB_CDR_BIC_LTD0_OFST (24)
+#define RG_SSUSB_CDR_BC_LTD1_OFST (16)
+#define RG_SSUSB_CDR_BC_LTR_OFST (8)
+#define RG_SSUSB_CDR_BC_LTD0_OFST (0)
+
+//U3D_PHYD_CDR1
+#define RG_SSUSB_CDR_BIR_LTD1_OFST (24)
+#define RG_SSUSB_CDR_BIR_LTR_OFST (16)
+#define RG_SSUSB_CDR_BIR_LTD0_OFST (8)
+#define RG_SSUSB_CDR_BW_SEL_OFST (6)
+#define RG_SSUSB_CDR_BIC_LTD1_OFST (0)
+
+//U3D_PHYD_PLL_0
+#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28)
+#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27)
+#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26)
+#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25)
+#define RG_SSUSB_P_EQ_T_SEL_OFST (15)
+#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5)
+#define RG_SSUSB_PLLBAND_RECAL_OFST (4)
+#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3)
+#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2)
+#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1)
+#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0)
+
+//U3D_PHYD_PLL_1
+#define RG_SSUSB_CDR_BAND_5G_OFST (24)
+#define RG_SSUSB_CDR_BAND_2P5G_OFST (16)
+#define RG_SSUSB_PLL_BAND_5G_OFST (8)
+#define RG_SSUSB_PLL_BAND_2P5G_OFST (0)
+
+//U3D_PHYD_BCN_DET_1
+#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16)
+#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0)
+
+//U3D_PHYD_BCN_DET_2
+#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16)
+#define RG_SSUSB_BCN_DET_DIS_OFST (12)
+#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0)
+
+//U3D_EQ0
+#define RG_SSUSB_EQ_DLHL_LFI_OFST (24)
+#define RG_SSUSB_EQ_DHHL_LFI_OFST (16)
+#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8)
+#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0)
+
+//U3D_EQ1
+#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24)
+#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16)
+#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8)
+#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0)
+
+//U3D_EQ2
+#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24)
+#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16)
+#define RG_SSUSB_EQ_STOPTIME_OFST (14)
+#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11)
+#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8)
+#define RG_SSUSB_EQ_STARTTIME_OFST (6)
+#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3)
+#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0)
+
+//U3D_EQ3
+#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28)
+#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24)
+#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16)
+#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8)
+#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7)
+#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0)
+
+//U3D_EQ_EYE0
+#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25)
+#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24)
+#define RG_SSUSB_EQ_EYE0_Y_OFST (16)
+#define RG_SSUSB_EQ_EYE1_Y_OFST (8)
+#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7)
+#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4)
+#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3)
+
+//U3D_EQ_EYE1
+#define RG_SSUSB_EQ_SIGDET_OFST (24)
+#define RG_SSUSB_EQ_EYE_MASK_OFST (7)
+
+//U3D_EQ_EYE2
+#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31)
+#define RG_SSUSB_EQ_SD_CNT1_OFST (24)
+#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22)
+#define RG_SSUSB_EQ_SD_CNT0_OFST (16)
+
+//U3D_EQ_DFE0
+#define RG_SSUSB_EQ_LEQMAX_OFST (28)
+#define RG_SSUSB_EQ_DFEX_EN_OFST (27)
+#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24)
+#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23)
+#define RG_SSUSB_EQ_PIEYE_INI_OFST (16)
+#define RG_SSUSB_EQ_PI90_INI_OFST (8)
+#define RG_SSUSB_EQ_PI0_INI_OFST (0)
+
+//U3D_EQ_DFE1
+#define RG_SSUSB_EQ_REV_OFST (16)
+#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12)
+#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8)
+#define RG_SSUSB_EQ_DFEX_RST_OFST (7)
+#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6)
+#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4)
+#define RG_SSUSB_EQ_DFEX_DIS_OFST (2)
+#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1)
+#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0)
+
+//U3D_EQ_DFE2
+#define RG_SSUSB_EQ_MON_SEL_OFST (24)
+#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16)
+#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8)
+#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0)
+
+//U3D_EQ_DFE3
+#define RG_SSUSB_EQ_RESERVED_OFST (0)
+
+//U3D_PHYD_MON0
+#define RGS_SSUSB_BERT_BERC_OFST (16)
+#define RGS_SSUSB_LFPS_OFST (12)
+#define RGS_SSUSB_TRAINDEC_OFST (8)
+#define RGS_SSUSB_SCP_PAT_OFST (0)
+
+//U3D_PHYD_MON1
+#define RGS_SSUSB_RX_FL_OUT_OFST (0)
+
+//U3D_PHYD_MON2
+#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16)
+#define RGS_SSUSB_RETRACK_OFST (12)
+#define RGS_SSUSB_RXPLL_LOCK_OFST (10)
+#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9)
+#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8)
+#define RGS_SSUSB_PDNCTL_OFST (0)
+
+//U3D_PHYD_MON3
+#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16)
+#define RGS_SSUSB_PRBS_ERRCNT_OFST (0)
+
+//U3D_PHYD_MON4
+#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24)
+#define RGS_SSUSB_SCP_DETCNT_OFST (16)
+#define RGS_SSUSB_TSEQ_DETCNT_OFST (0)
+
+//U3D_PHYD_MON5
+#define RGS_SSUSB_EBUFMSG_OFST (16)
+#define RGS_SSUSB_BERT_LOCK_OFST (15)
+#define RGS_SSUSB_SCP_DET_OFST (14)
+#define RGS_SSUSB_TSEQ_DET_OFST (13)
+#define RGS_SSUSB_EBUF_UDF_OFST (12)
+#define RGS_SSUSB_EBUF_OVF_OFST (11)
+#define RGS_SSUSB_PRBS_PASSTH_OFST (10)
+#define RGS_SSUSB_PRBS_PASS_OFST (9)
+#define RGS_SSUSB_PRBS_LOCK_OFST (8)
+#define RGS_SSUSB_T2RLB_ERR_OFST (6)
+#define RGS_SSUSB_T2RLB_PASSTH_OFST (5)
+#define RGS_SSUSB_T2RLB_PASS_OFST (4)
+#define RGS_SSUSB_T2RLB_LOCK_OFST (3)
+#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2)
+#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1)
+#define RGS_SSUSB_RXDETECTED_OFST (0)
+
+//U3D_PHYD_MON6
+#define RGS_SSUSB_SIGCAL_DONE_OFST (30)
+#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29)
+#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24)
+#define RGS_SSUSB_RX_IMP_SEL_OFST (16)
+#define RGS_SSUSB_TX_IMP_SEL_OFST (8)
+#define RGS_SSUSB_TFIFO_MSG_OFST (4)
+#define RGS_SSUSB_RFIFO_MSG_OFST (0)
+
+//U3D_PHYD_MON7
+#define RGS_SSUSB_FT_OUT_OFST (8)
+#define RGS_SSUSB_PRB_OUT_OFST (0)
+
+//U3D_PHYA_RX_MON0
+#define RGS_SSUSB_EQ_DCLEQ_OFST (24)
+#define RGS_SSUSB_EQ_DCD0H_OFST (16)
+#define RGS_SSUSB_EQ_DCD0L_OFST (8)
+#define RGS_SSUSB_EQ_DCD1H_OFST (0)
+
+//U3D_PHYA_RX_MON1
+#define RGS_SSUSB_EQ_DCD1L_OFST (24)
+#define RGS_SSUSB_EQ_DCE0_OFST (16)
+#define RGS_SSUSB_EQ_DCE1_OFST (8)
+#define RGS_SSUSB_EQ_DCHHL_OFST (0)
+
+//U3D_PHYA_RX_MON2
+#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31)
+#define RGS_SSUSB_EQ_DCLHL_OFST (24)
+#define RGS_SSUSB_EQ_STATUS_OFST (16)
+#define RGS_SSUSB_EQ_DCEYE0_OFST (8)
+#define RGS_SSUSB_EQ_DCEYE1_OFST (0)
+
+//U3D_PHYA_RX_MON3
+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0)
+
+//U3D_PHYA_RX_MON4
+#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0)
+
+//U3D_PHYA_RX_MON5
+#define RGS_SSUSB_EQ_DCLEQOS_OFST (8)
+#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7)
+#define RGS_SSUSB_EQ_PILPO_OFST (0)
+
+//U3D_PHYD_CPPAT2
+#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16)
+#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8)
+#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0)
+
+//U3D_EQ_EYE3
+#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24)
+#define RG_SSUSB_EQ_EYE_CNT_OFST (0)
+
+//U3D_KBAND_OUT
+#define RGS_SSUSB_CDR_BAND_5G_OFST (24)
+#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16)
+#define RGS_SSUSB_PLL_BAND_5G_OFST (8)
+#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0)
+
+//U3D_KBAND_OUT1
+#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24)
+#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16)
+#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8)
+#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0)
+
+
+///////////////////////////////////////////////////////////////////////////////
+
+struct u3phyd_bank2_reg {
+ //0x0
+ PHY_LE32 b2_phyd_top1;
+ PHY_LE32 b2_phyd_top2;
+ PHY_LE32 b2_phyd_top3;
+ PHY_LE32 b2_phyd_top4;
+ //0x10
+ PHY_LE32 b2_phyd_top5;
+ PHY_LE32 b2_phyd_top6;
+ PHY_LE32 b2_phyd_top7;
+ PHY_LE32 b2_phyd_p_sigdet1;
+ //0x20
+ PHY_LE32 b2_phyd_p_sigdet2;
+ PHY_LE32 b2_phyd_p_sigdet_cal1;
+ PHY_LE32 b2_phyd_rxdet1;
+ PHY_LE32 b2_phyd_rxdet2;
+ //0x30
+ PHY_LE32 b2_phyd_misc0;
+ PHY_LE32 b2_phyd_misc2;
+ PHY_LE32 b2_phyd_misc3;
+ PHY_LE32 reserve0;
+ //0x40
+ PHY_LE32 b2_rosc_0;
+ PHY_LE32 b2_rosc_1;
+ PHY_LE32 b2_rosc_2;
+ PHY_LE32 b2_rosc_3;
+ //0x50
+ PHY_LE32 b2_rosc_4;
+ PHY_LE32 b2_rosc_5;
+ PHY_LE32 b2_rosc_6;
+ PHY_LE32 b2_rosc_7;
+ //0x60
+ PHY_LE32 b2_rosc_8;
+ PHY_LE32 b2_rosc_9;
+ PHY_LE32 b2_rosc_a;
+ PHY_LE32 reserve1;
+ //0x70~0xd0
+ PHY_LE32 reserve2[28];
+ //0xe0
+ PHY_LE32 phyd_version;
+ PHY_LE32 phyd_model;
+};
+
+//U3D_B2_PHYD_TOP1
+#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28
+#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24
+#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17
+#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16
+#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15
+#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14
+#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13
+#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12
+#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11
+#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10
+#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9
+#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8
+#define RG_SSUSB_RATE (0x1<<6) //6:6
+#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5
+#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4
+#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3
+#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1
+#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0
+
+//U3D_B2_PHYD_TOP2
+#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30
+#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24
+#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22
+#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16
+#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14
+#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8
+#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6
+#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0
+
+//U3D_B2_PHYD_TOP3
+#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25
+#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24
+#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16
+#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13
+#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8
+#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0
+
+//U3D_B2_PHYD_TOP4
+#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28
+#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24
+#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16
+#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8
+#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0
+
+//U3D_B2_PHYD_TOP5
+#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24
+#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16
+#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8
+#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0
+
+//U3D_B2_PHYD_TOP6
+#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28
+#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24
+#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16
+#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8
+#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0
+
+//U3D_B2_PHYD_TOP7
+#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24
+#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16
+#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8
+#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0
+
+//U3D_B2_PHYD_P_SIGDET1
+#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31
+#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24
+#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16
+#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8
+#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0
+
+//U3D_B2_PHYD_P_SIGDET2
+#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29
+#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28
+#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27
+#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25
+#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24
+#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16
+#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10
+#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8
+#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6
+#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5
+#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4
+#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2
+#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0
+
+//U3D_B2_PHYD_P_SIGDET_CAL1
+#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24
+#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16
+#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8
+#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3
+#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2
+#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1
+#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0
+
+//U3D_B2_PHYD_RXDET1
+#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31
+#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30
+#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29
+#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28
+#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27
+#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18
+#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9
+#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0
+
+//U3D_B2_PHYD_RXDET2
+#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31
+#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30
+#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29
+#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18
+#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9
+#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0
+
+//U3D_B2_PHYD_MISC0
+#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22
+#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21
+#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20
+#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16
+#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15
+#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14
+#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13
+#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12
+#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11
+#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10
+#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8
+#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5
+#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4
+#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2
+#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1
+#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0
+
+//U3D_B2_PHYD_MISC2
+#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31
+#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27
+#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26
+#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25
+#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24
+#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23
+#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22
+#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13
+#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7
+#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1
+#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0
+
+//U3D_B2_PHYD_MISC3
+#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16
+#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0
+
+//U3D_B2_ROSC_0
+#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23
+#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16
+#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3
+#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2
+#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1
+#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0
+
+//U3D_B2_ROSC_1
+#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20
+#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19
+#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17
+#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16
+#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8
+#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0
+
+//U3D_B2_ROSC_2
+#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16
+#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0
+
+//U3D_B2_ROSC_3
+#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16
+#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0
+
+//U3D_B2_ROSC_4
+#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16
+#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0
+
+//U3D_B2_ROSC_5
+#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16
+#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0
+
+//U3D_B2_ROSC_6
+#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16
+#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0
+
+//U3D_B2_ROSC_7
+#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16
+#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0
+
+//U3D_B2_ROSC_8
+#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16
+#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2
+#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1
+#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0
+
+//U3D_B2_ROSC_9
+#define RGS_FM_RING_CNT (0xffff<<16) //31:16
+#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10
+#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9
+#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8
+#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0
+
+//U3D_B2_ROSC_A
+#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0
+
+//U3D_PHYD_VERSION
+#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0
+
+//U3D_PHYD_MODEL
+#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0
+
+
+/* OFFSET */
+
+//U3D_B2_PHYD_TOP1
+#define RG_SSUSB_PCIE2_K_EMP_OFST (28)
+#define RG_SSUSB_PCIE2_K_FUL_OFST (24)
+#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17)
+#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16)
+#define RG_SSUSB_SIGDET_EN_OFST (15)
+#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14)
+#define RG_SSUSB_CLKRX_EN_OFST (13)
+#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12)
+#define RG_SSUSB_CLKTX_EN_OFST (11)
+#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10)
+#define RG_SSUSB_CLK_REQ_N_I_OFST (9)
+#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8)
+#define RG_SSUSB_RATE_OFST (6)
+#define RG_SSUSB_FORCE_RATE_OFST (5)
+#define RG_SSUSB_PCIE_MODE_SEL_OFST (4)
+#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3)
+#define RG_SSUSB_PHY_MODE_OFST (1)
+#define RG_SSUSB_FORCE_PHY_MODE_OFST (0)
+
+//U3D_B2_PHYD_TOP2
+#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30)
+#define RG_SSUSB_IDRV_6DB_OFST (24)
+#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22)
+#define RG_SSUSB_IDEM_3P5DB_OFST (16)
+#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14)
+#define RG_SSUSB_IDRV_3P5DB_OFST (8)
+#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6)
+#define RG_SSUSB_IDRV_0DB_OFST (0)
+
+//U3D_B2_PHYD_TOP3
+#define RG_SSUSB_TX_BIASI_OFST (25)
+#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24)
+#define RG_SSUSB_TX_BIASI_EN_OFST (16)
+#define RG_SSUSB_FORCE_TX_BIASI_OFST (13)
+#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8)
+#define RG_SSUSB_IDEM_6DB_OFST (0)
+
+//U3D_B2_PHYD_TOP4
+#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28)
+#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24)
+#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16)
+#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8)
+#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0)
+
+//U3D_B2_PHYD_TOP5
+#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24)
+#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16)
+#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8)
+#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0)
+
+//U3D_B2_PHYD_TOP6
+#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28)
+#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24)
+#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16)
+#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8)
+#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0)
+
+//U3D_B2_PHYD_TOP7
+#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24)
+#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16)
+#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8)
+#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0)
+
+//U3D_B2_PHYD_P_SIGDET1
+#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31)
+#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24)
+#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16)
+#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8)
+#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0)
+
+//U3D_B2_PHYD_P_SIGDET2
+#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29)
+#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28)
+#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27)
+#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25)
+#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24)
+#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16)
+#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10)
+#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8)
+#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6)
+#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5)
+#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4)
+#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2)
+#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0)
+
+//U3D_B2_PHYD_P_SIGDET_CAL1
+#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24)
+#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16)
+#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8)
+#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3)
+#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2)
+#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1)
+#define RG_SSUSB_P_SIGDET_REK_OFST (0)
+
+//U3D_B2_PHYD_RXDET1
+#define RG_SSUSB_RXDET_PRB_SEL_OFST (31)
+#define RG_SSUSB_FORCE_CMDET_OFST (30)
+#define RG_SSUSB_RXDET_EN_OFST (29)
+#define RG_SSUSB_FORCE_RXDET_EN_OFST (28)
+#define RG_SSUSB_RXDET_K_TWICE_OFST (27)
+#define RG_SSUSB_RXDET_STB3_SET_OFST (18)
+#define RG_SSUSB_RXDET_STB2_SET_OFST (9)
+#define RG_SSUSB_RXDET_STB1_SET_OFST (0)
+
+//U3D_B2_PHYD_RXDET2
+#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31)
+#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30)
+#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29)
+#define RG_SSUSB_PDN_T_SEL_OFST (18)
+#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9)
+#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0)
+
+//U3D_B2_PHYD_MISC0
+#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22)
+#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21)
+#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20)
+#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16)
+#define RG_SSUSB_LFPS_PSEL_OFST (15)
+#define RG_SSUSB_RX_SIGDET_EN_OFST (14)
+#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13)
+#define RG_SSUSB_RX_PI_CAL_EN_OFST (12)
+#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11)
+#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10)
+#define RG_SSUSB_T2RLB_PSEL_OFST (8)
+#define RG_SSUSB_PPCTL_PSEL_OFST (5)
+#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4)
+#define RG_SSUSB_BERTLB_PSEL_OFST (2)
+#define RG_SSUSB_RETRACK_DIS_OFST (1)
+#define RG_SSUSB_PPERRCNT_CLR_OFST (0)
+
+//U3D_B2_PHYD_MISC2
+#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31)
+#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27)
+#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26)
+#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25)
+#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24)
+#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23)
+#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22)
+#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13)
+#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7)
+#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1)
+#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0)
+
+//U3D_B2_PHYD_MISC3
+#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16)
+#define RGS_SSUSB_PPERRCNT_OFST (0)
+
+//U3D_B2_ROSC_0
+#define RG_SSUSB_RING_OSC_CNTEND_OFST (23)
+#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16)
+#define RG_SSUSB_RING_OSC_EN_OFST (3)
+#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2)
+#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1)
+#define RG_SSUSB_RING_BYPASS_DET_OFST (0)
+
+//U3D_B2_ROSC_1
+#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20)
+#define RG_SSUSB_RING_OSC_P3_OFST (19)
+#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17)
+#define RG_SSUSB_RING_OSC_RECAL_OFST (16)
+#define RG_SSUSB_RING_OSC_SEL_OFST (8)
+#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0)
+
+//U3D_B2_ROSC_2
+#define RG_SSUSB_RING_DET_STRCYC2_OFST (16)
+#define RG_SSUSB_RING_DET_STRCYC1_OFST (0)
+
+//U3D_B2_ROSC_3
+#define RG_SSUSB_RING_DET_DETWIN1_OFST (16)
+#define RG_SSUSB_RING_DET_STRCYC3_OFST (0)
+
+//U3D_B2_ROSC_4
+#define RG_SSUSB_RING_DET_DETWIN3_OFST (16)
+#define RG_SSUSB_RING_DET_DETWIN2_OFST (0)
+
+//U3D_B2_ROSC_5
+#define RG_SSUSB_RING_DET_LBOND1_OFST (16)
+#define RG_SSUSB_RING_DET_UBOND1_OFST (0)
+
+//U3D_B2_ROSC_6
+#define RG_SSUSB_RING_DET_LBOND2_OFST (16)
+#define RG_SSUSB_RING_DET_UBOND2_OFST (0)
+
+//U3D_B2_ROSC_7
+#define RG_SSUSB_RING_DET_LBOND3_OFST (16)
+#define RG_SSUSB_RING_DET_UBOND3_OFST (0)
+
+//U3D_B2_ROSC_8
+#define RG_SSUSB_RING_RESERVE_OFST (16)
+#define RG_SSUSB_ROSC_PROB_SEL_OFST (2)
+#define RG_SSUSB_RING_FREQMETER_EN_OFST (1)
+#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0)
+
+//U3D_B2_ROSC_9
+#define RGS_FM_RING_CNT_OFST (16)
+#define RGS_SSUSB_RING_OSC_STATE_OFST (10)
+#define RGS_SSUSB_RING_OSC_STABLE_OFST (9)
+#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8)
+#define RGS_SSUSB_RING_OSC_CAL_OFST (0)
+
+//U3D_B2_ROSC_A
+#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0)
+
+//U3D_PHYD_VERSION
+#define RGS_SSUSB_PHYD_VERSION_OFST (0)
+
+//U3D_PHYD_MODEL
+#define RGS_SSUSB_PHYD_MODEL_OFST (0)
+
+
+///////////////////////////////////////////////////////////////////////////////
+
+struct sifslv_chip_reg {
+ PHY_LE32 xtalbias;
+ PHY_LE32 syspll1;
+ PHY_LE32 gpio_ctla;
+ PHY_LE32 gpio_ctlb;
+ PHY_LE32 gpio_ctlc;
+};
+
+//U3D_GPIO_CTLA
+#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0
+
+//U3D_GPIO_CTLB
+#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0
+
+//U3D_GPIO_CTLC
+#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0
+
+/* OFFSET */
+
+//U3D_GPIO_CTLA
+#define RG_C60802_GPIO_CTLA_OFST (0)
+
+//U3D_GPIO_CTLB
+#define RG_C60802_GPIO_CTLB_OFST (0)
+
+//U3D_GPIO_CTLC
+#define RG_C60802_GPIO_CTLC_OFST (0)
+
+///////////////////////////////////////////////////////////////////////////////
+
+struct sifslv_fm_feg {
+ //0x0
+ PHY_LE32 fmcr0;
+ PHY_LE32 fmcr1;
+ PHY_LE32 fmcr2;
+ PHY_LE32 fmmonr0;
+ //0x10
+ PHY_LE32 fmmonr1;
+};
+
+//U3D_FMCR0
+#define RG_LOCKTH (0xf<<28) //31:28
+#define RG_MONCLK_SEL (0x3<<26) //27:26
+#define RG_FM_MODE (0x1<<25) //25:25
+#define RG_FREQDET_EN (0x1<<24) //24:24
+#define RG_CYCLECNT (0xffffff<<0) //23:0
+
+//U3D_FMCR1
+#define RG_TARGET (0xffffffff<<0) //31:0
+
+//U3D_FMCR2
+#define RG_OFFSET (0xffffffff<<0) //31:0
+
+//U3D_FMMONR0
+#define USB_FM_OUT (0xffffffff<<0) //31:0
+
+//U3D_FMMONR1
+#define RG_MONCLK_SEL_3 (0x1<<9) //9:9
+#define RG_FRCK_EN (0x1<<8) //8:8
+#define USBPLL_LOCK (0x1<<1) //1:1
+#define USB_FM_VLD (0x1<<0) //0:0
+
+
+/* OFFSET */
+
+//U3D_FMCR0
+#define RG_LOCKTH_OFST (28)
+#define RG_MONCLK_SEL_OFST (26)
+#define RG_FM_MODE_OFST (25)
+#define RG_FREQDET_EN_OFST (24)
+#define RG_CYCLECNT_OFST (0)
+
+//U3D_FMCR1
+#define RG_TARGET_OFST (0)
+
+//U3D_FMCR2
+#define RG_OFFSET_OFST (0)
+
+//U3D_FMMONR0
+#define USB_FM_OUT_OFST (0)
+
+//U3D_FMMONR1
+#define RG_MONCLK_SEL_3_OFST (9)
+#define RG_FRCK_EN_OFST (8)
+#define USBPLL_LOCK_OFST (1)
+#define USB_FM_VLD_OFST (0)
+
+
+///////////////////////////////////////////////////////////////////////////////
+
+PHY_INT32 phy_init(struct u3phy_info *info);
+PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
+PHY_INT32 eyescan_init(struct u3phy_info *info);
+PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y
+ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
+PHY_INT32 u2_save_cur_en(struct u3phy_info *info);
+PHY_INT32 u2_save_cur_re(struct u3phy_info *info);
+PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info);
+
+#endif
+#endif
--- /dev/null
+++ b/drivers/usb/host/mtk-phy-ahb.c
@@ -0,0 +1,58 @@
+#include "mtk-phy.h"
+#ifdef CONFIG_U3D_HAL_SUPPORT
+#include "mu3d_hal_osal.h"
+#endif
+
+#ifdef CONFIG_U3_PHY_AHB_SUPPORT
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#ifndef CONFIG_U3D_HAL_SUPPORT
+#define os_writel(addr,data) {\
+ (*((volatile PHY_UINT32*)(addr)) = data);\
+ }
+#define os_readl(addr) *((volatile PHY_UINT32*)(addr))
+#define os_writelmsk(addr, data, msk) \
+ { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \
+ }
+#define os_setmsk(addr, msk) \
+ { os_writel(addr, os_readl(addr) | msk); \
+ }
+#define os_clrmsk(addr, msk) \
+ { os_writel(addr, os_readl(addr) &~ msk); \
+ }
+/*msk the data first, then umsk with the umsk.*/
+#define os_writelmskumsk(addr, data, msk, umsk) \
+{\
+ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\
+}
+
+#endif
+
+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data)
+{
+ os_writel(addr, data);
+
+ return 0;
+}
+
+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr)
+{
+ return os_readl(addr);
+}
+
+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data)
+{
+ os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8));
+
+ return 0;
+}
+
+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr)
+{
+ return ((os_readl(addr)>>((addr%4)*8))&0xff);
+}
+
+#endif
+
--- /dev/null
+++ b/drivers/usb/host/mtk-phy.c
@@ -0,0 +1,102 @@
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#define U3_PHY_LIB
+#include "mtk-phy.h"
+#ifdef CONFIG_PROJECT_7621
+#include "mtk-phy-7621.h"
+#endif
+#ifdef CONFIG_PROJECT_PHY
+static struct u3phy_operator project_operators = {
+ .init = phy_init,
+ .change_pipe_phase = phy_change_pipe_phase,
+ .eyescan_init = eyescan_init,
+ .eyescan = phy_eyescan,
+ .u2_slew_rate_calibration = u2_slew_rate_calibration,
+};
+#endif
+
+
+PHY_INT32 u3phy_init(){
+#ifndef CONFIG_PROJECT_PHY
+ PHY_INT32 u3phy_version;
+#endif
+
+ if(u3phy != NULL){
+ return PHY_TRUE;
+ }
+
+ u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO);
+#endif
+#ifdef CONFIG_U3_PHY_GPIO_SUPPORT
+ u3phy->phyd_version_addr = 0x2000e4;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ u3phy_p1->phyd_version_addr = 0x2000e4;
+#endif
+#else
+ u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4;
+#endif
+#endif
+
+#ifdef CONFIG_PROJECT_PHY
+
+ u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE;
+ u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE;
+ u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE;
+ u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE;
+ u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE;
+ u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
+ u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
+ u3phy_ops = &project_operators;
+
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1;
+ u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1;
+ u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1;
+ u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1;
+ u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1;
+ u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE;
+ u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE;
+#endif
+#endif
+
+ return PHY_TRUE;
+}
+
+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
+ PHY_INT8 cur_value;
+ PHY_INT8 new_value;
+
+ cur_value = U3PhyReadReg8(addr);
+ new_value = (cur_value & (~mask)) | (value << offset);
+ //udelay(i2cdelayus);
+ U3PhyWriteReg8(addr, new_value);
+ return PHY_TRUE;
+}
+
+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){
+ PHY_INT32 cur_value;
+ PHY_INT32 new_value;
+
+ cur_value = U3PhyReadReg32(addr);
+ new_value = (cur_value & (~mask)) | ((value << offset) & mask);
+ U3PhyWriteReg32(addr, new_value);
+ //DRV_MDELAY(100);
+
+ return PHY_TRUE;
+}
+
+PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){
+
+ return ((U3PhyReadReg8(addr) & mask) >> offset);
+}
+
+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){
+
+ return ((U3PhyReadReg32(addr) & mask) >> offset);
+}
+
--- /dev/null
+++ b/drivers/usb/host/mtk-phy.h
@@ -0,0 +1,179 @@
+#ifndef __MTK_PHY_NEW_H
+#define __MTK_PHY_NEW_H
+
+//#define CONFIG_U3D_HAL_SUPPORT
+
+/* include system library */
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+/* Choose PHY R/W implementation */
+//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO
+#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC
+
+/* Choose PHY version */
+//Select your project by defining one of the followings
+#define CONFIG_PROJECT_7621 //7621
+#define CONFIG_PROJECT_PHY
+
+/* BASE ADDRESS DEFINE, should define this on ASIC */
+#define PHY_BASE 0xBE1D0000
+#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100)
+#define SIFSLV_CHIP_BASE (PHY_BASE+0x700)
+#define U2_PHY_BASE (PHY_BASE+0x800)
+#define U3_PHYD_BASE (PHY_BASE+0x900)
+#define U3_PHYD_B2_BASE (PHY_BASE+0xa00)
+#define U3_PHYA_BASE (PHY_BASE+0xb00)
+#define U3_PHYA_DA_BASE (PHY_BASE+0xc00)
+
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100)
+#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700)
+#define U2_PHY_BASE_P1 (PHY_BASE+0x1000)
+#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100)
+#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200)
+#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300)
+#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400)
+#endif
+
+/*
+
+0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg
+0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc
+0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28
+0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28
+0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28
+0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28
+0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28
+*/
+
+
+/* TYPE DEFINE */
+typedef unsigned int PHY_UINT32;
+typedef int PHY_INT32;
+typedef unsigned short PHY_UINT16;
+typedef short PHY_INT16;
+typedef unsigned char PHY_UINT8;
+typedef char PHY_INT8;
+
+typedef PHY_UINT32 __bitwise PHY_LE32;
+
+/* CONSTANT DEFINE */
+#define PHY_FALSE 0
+#define PHY_TRUE 1
+
+/* MACRO DEFINE */
+#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data))
+#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr))
+
+#define DRV_MDELAY mdelay
+#define DRV_MSLEEP msleep
+#define DRV_UDELAY udelay
+#define DRV_USLEEP usleep
+
+/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */
+PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data);
+PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr);
+PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data);
+PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr);
+
+/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */
+PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
+PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value);
+PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
+PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask);
+
+struct u3phy_info {
+ PHY_INT32 phy_version;
+ PHY_INT32 phyd_version_addr;
+
+#ifdef CONFIG_PROJECT_PHY
+ struct u2phy_reg *u2phy_regs;
+ struct u3phya_reg *u3phya_regs;
+ struct u3phya_da_reg *u3phya_da_regs;
+ struct u3phyd_reg *u3phyd_regs;
+ struct u3phyd_bank2_reg *u3phyd_bank2_regs;
+ struct sifslv_chip_reg *sifslv_chip_regs;
+ struct sifslv_fm_feg *sifslv_fm_regs;
+#endif
+};
+
+struct u3phy_operator {
+ PHY_INT32 (*init) (struct u3phy_info *info);
+ PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase);
+ PHY_INT32 (*eyescan_init) (struct u3phy_info *info);
+ PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt);
+ PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info);
+ PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info);
+ PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info);
+};
+
+#ifdef U3_PHY_LIB
+#define AUTOEXT
+#else
+#define AUTOEXT extern
+#endif
+
+AUTOEXT struct u3phy_info *u3phy;
+AUTOEXT struct u3phy_info *u3phy_p1;
+AUTOEXT struct u3phy_operator *u3phy_ops;
+
+/*********eye scan required*********/
+
+#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF))
+#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8))
+
+typedef enum
+{
+ SCAN_UP,
+ SCAN_DN
+} enumScanDir;
+
+struct strucScanRegion
+{
+ PHY_INT8 bX_tl;
+ PHY_INT8 bY_tl;
+ PHY_INT8 bX_br;
+ PHY_INT8 bY_br;
+ PHY_INT8 bDeltaX;
+ PHY_INT8 bDeltaY;
+};
+
+struct strucTestCycle
+{
+ PHY_UINT16 wEyeCnt;
+ PHY_INT8 bNumOfEyeCnt;
+ PHY_INT8 bPICalEn;
+ PHY_INT8 bNumOfIgnoreCnt;
+};
+
+#define ERRCNT_MAX 128
+#define CYCLE_COUNT_MAX 15
+
+/// the map resolution is 128 x 128 pts
+#define MAX_X 127
+#define MAX_Y 127
+#define MIN_X 0
+#define MIN_Y 0
+
+PHY_INT32 u3phy_init(void);
+
+AUTOEXT struct strucScanRegion _rEye1;
+AUTOEXT struct strucScanRegion _rEye2;
+AUTOEXT struct strucTestCycle _rTestCycle;
+AUTOEXT PHY_UINT8 _bXcurr;
+AUTOEXT PHY_UINT8 _bYcurr;
+AUTOEXT enumScanDir _eScanDir;
+AUTOEXT PHY_INT8 _fgXChged;
+AUTOEXT PHY_INT8 _bPIResult;
+/* use local variable instead to save memory use */
+#if 0
+AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
+AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX];
+#endif
+
+/***********************************/
+#endif
+
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -1,7 +1,7 @@
#ifndef __LINUX_USB_PCI_QUIRKS_H
#define __LINUX_USB_PCI_QUIRKS_H
-#ifdef CONFIG_PCI
+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
#endif /* CONFIG_PCI */
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -21,6 +21,9 @@
*/
#include "xhci.h"
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#include "xhci-mtk.h"
+#endif
#define XHCI_INIT_VALUE 0x0
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment
static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
{
+ if (!seg)
+ return;
+
if (seg->trbs) {
dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
seg->trbs = NULL;
@@ -1475,9 +1478,17 @@ int xhci_endpoint_init(struct xhci_hcd *
max_burst = (usb_endpoint_maxp(&ep->desc)
& 0x1800) >> 11;
}
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
+ max_packet += 2;
+#endif
break;
case USB_SPEED_FULL:
case USB_SPEED_LOW:
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc))
+ max_packet += 2;
+#endif
break;
default:
BUG();
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-power.c
@@ -0,0 +1,115 @@
+#include "xhci-mtk.h"
+#include "xhci-mtk-power.h"
+#include "xhci.h"
+#include <linux/kernel.h> /* printk() */
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+static int g_num_u3_port;
+static int g_num_u2_port;
+
+
+void enableXhciAllPortPower(struct xhci_hcd *xhci){
+ int i;
+ u32 port_id, temp;
+ u32 __iomem *addr;
+
+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
+
+ for(i=1; i<=g_num_u3_port; i++){
+ port_id=i;
+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
+ temp = readl(addr);
+ temp = xhci_port_state_to_neutral(temp);
+ temp |= PORT_POWER;
+ writel(temp, addr);
+ }
+ for(i=1; i<=g_num_u2_port; i++){
+ port_id=i+g_num_u3_port;
+ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff);
+ temp = readl(addr);
+ temp = xhci_port_state_to_neutral(temp);
+ temp |= PORT_POWER;
+ writel(temp, addr);
+ }
+}
+
+void enableAllClockPower(){
+
+ int i;
+ u32 temp;
+
+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
+
+ //2. Enable xHC
+ writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
+ writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL);
+ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
+
+ //1. Enable target ports
+ for(i=0; i<g_num_u3_port; i++){
+ temp = readl(SSUSB_U3_CTRL(i));
+ temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS);
+ writel(temp, SSUSB_U3_CTRL(i));
+ }
+ for(i=0; i<g_num_u2_port; i++){
+ temp = readl(SSUSB_U2_CTRL(i));
+ temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS);
+ writel(temp, SSUSB_U2_CTRL(i));
+ }
+ msleep(100);
+}
+
+
+//(X)disable clock/power of a port
+//(X)if all ports are disabled, disable IP ctrl power
+//disable all ports and IP clock/power, this is just mention HW that the power/clock of port
+//and IP could be disable if suspended.
+//If doesn't not disable all ports at first, the IP clock/power will never be disabled
+//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time
+//port_index: port number
+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
+void disablePortClockPower(void){
+ int i;
+ u32 temp;
+
+ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP));
+ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP));
+
+ for(i=0; i<g_num_u3_port; i++){
+ temp = readl(SSUSB_U3_CTRL(i));
+ temp = temp | (SSUSB_U3_PORT_PDN);
+ writel(temp, SSUSB_U3_CTRL(i));
+ }
+ for(i=0; i<g_num_u2_port; i++){
+ temp = readl(SSUSB_U2_CTRL(i));
+ temp = temp | (SSUSB_U2_PORT_PDN);
+ writel(temp, SSUSB_U2_CTRL(i));
+ }
+ writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
+}
+
+//if IP ctrl power is disabled, enable it
+//enable clock/power of a port
+//port_index: port number
+//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed)
+void enablePortClockPower(int port_index, int port_rev){
+ int i;
+ u32 temp;
+
+ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1);
+
+ if(port_rev == 0x3){
+ temp = readl(SSUSB_U3_CTRL(port_index));
+ temp = temp & (~SSUSB_U3_PORT_PDN);
+ writel(temp, SSUSB_U3_CTRL(port_index));
+ }
+ else if(port_rev == 0x2){
+ temp = readl(SSUSB_U2_CTRL(port_index));
+ temp = temp & (~SSUSB_U2_PORT_PDN);
+ writel(temp, SSUSB_U2_CTRL(port_index));
+ }
+}
+
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-power.h
@@ -0,0 +1,13 @@
+#ifndef _XHCI_MTK_POWER_H
+#define _XHCI_MTK_POWER_H
+
+#include <linux/usb.h>
+#include "xhci.h"
+#include "xhci-mtk.h"
+
+void enableXhciAllPortPower(struct xhci_hcd *xhci);
+void enableAllClockPower(void);
+void disablePortClockPower(void);
+void enablePortClockPower(int port_index, int port_rev);
+
+#endif
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-scheduler.c
@@ -0,0 +1,608 @@
+#include "xhci-mtk-scheduler.h"
+#include <linux/kernel.h> /* printk() */
+
+static struct sch_ep **ss_out_eps[MAX_EP_NUM];
+static struct sch_ep **ss_in_eps[MAX_EP_NUM];
+static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc
+static struct sch_ep **tt_intr_eps[MAX_EP_NUM];
+
+
+int mtk_xhci_scheduler_init(void){
+ int i;
+
+ for(i=0; i<MAX_EP_NUM; i++){
+ ss_out_eps[i] = NULL;
+ }
+ for(i=0; i<MAX_EP_NUM; i++){
+ ss_in_eps[i] = NULL;
+ }
+ for(i=0; i<MAX_EP_NUM; i++){
+ hs_eps[i] = NULL;
+ }
+ for(i=0; i<MAX_EP_NUM; i++){
+ tt_intr_eps[i] = NULL;
+ }
+ return 0;
+}
+
+int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
+ , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode
+ , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){
+
+ struct sch_ep **ep_array;
+ int i;
+
+ if(is_in && dev_speed == USB_SPEED_SUPER ){
+ ep_array = (struct sch_ep **)ss_in_eps;
+ }
+ else if(dev_speed == USB_SPEED_SUPER){
+ ep_array = (struct sch_ep **)ss_out_eps;
+ }
+ else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){
+ ep_array = (struct sch_ep **)hs_eps;
+ }
+ else{
+ ep_array = (struct sch_ep **)tt_intr_eps;
+ }
+ for(i=0; i<MAX_EP_NUM; i++){
+ if(ep_array[i] == NULL){
+ tmp_ep->dev_speed = dev_speed;
+ tmp_ep->isTT = isTT;
+ tmp_ep->is_in = is_in;
+ tmp_ep->ep_type = ep_type;
+ tmp_ep->maxp = maxp;
+ tmp_ep->interval = interval;
+ tmp_ep->burst = burst;
+ tmp_ep->mult = mult;
+ tmp_ep->offset = offset;
+ tmp_ep->repeat = repeat;
+ tmp_ep->pkts = pkts;
+ tmp_ep->cs_count = cs_count;
+ tmp_ep->burst_mode = burst_mode;
+ tmp_ep->bw_cost = bw_cost;
+ tmp_ep->ep = ep;
+ ep_array[i] = tmp_ep;
+ return SCH_SUCCESS;
+ }
+ }
+ return SCH_FAIL;
+}
+
+int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat
+ , int td_size){
+ int i, j, k;
+ int bw_required[3];
+ int final_bw_required;
+ int bw_required_per_repeat;
+ int tmp_bw_required;
+ struct sch_ep *cur_sch_ep;
+ struct sch_ep **ep_array;
+ int cur_offset;
+ int cur_ep_offset;
+ int tmp_offset;
+ int tmp_interval;
+ int ep_offset;
+ int ep_interval;
+ int ep_repeat;
+ int ep_mult;
+
+ if(is_in){
+ ep_array = (struct sch_ep **)ss_in_eps;
+ }
+ else{
+ ep_array = (struct sch_ep **)ss_out_eps;
+ }
+
+ bw_required[0] = 0;
+ bw_required[1] = 0;
+ bw_required[2] = 0;
+
+ if(repeat == 0){
+ final_bw_required = 0;
+ for(i=0; i<MAX_EP_NUM; i++){
+ cur_sch_ep = ep_array[i];
+ if(cur_sch_ep == NULL){
+ continue;
+ }
+ ep_interval = cur_sch_ep->interval;
+ ep_offset = cur_sch_ep->offset;
+ if(cur_sch_ep->repeat == 0){
+ if(ep_interval >= interval){
+ tmp_offset = ep_offset + ep_interval - offset;
+ tmp_interval = interval;
+ }
+ else{
+ tmp_offset = offset + interval - ep_offset;
+ tmp_interval = ep_interval;
+ }
+ if(tmp_offset % tmp_interval == 0){
+ final_bw_required += cur_sch_ep->bw_cost;
+ }
+ }
+ else{
+ ep_repeat = cur_sch_ep->repeat;
+ ep_mult = cur_sch_ep->mult;
+ for(k=0; k<=ep_mult; k++){
+ cur_ep_offset = ep_offset+(k*ep_mult);
+ if(ep_interval >= interval){
+ tmp_offset = cur_ep_offset + ep_interval - offset;
+ tmp_interval = interval;
+ }
+ else{
+ tmp_offset = offset + interval - cur_ep_offset;
+ tmp_interval = ep_interval;
+ }
+ if(tmp_offset % tmp_interval == 0){
+ final_bw_required += cur_sch_ep->bw_cost;
+ break;
+ }
+ }
+ }
+ }
+ final_bw_required += td_size;
+ }
+ else{
+ bw_required_per_repeat = maxp * (burst+1);
+ for(j=0; j<=mult; j++){
+ tmp_bw_required = 0;
+ cur_offset = offset+(j*repeat);
+ for(i=0; i<MAX_EP_NUM; i++){
+ cur_sch_ep = ep_array[i];
+ if(cur_sch_ep == NULL){
+ continue;
+ }
+ ep_interval = cur_sch_ep->interval;
+ ep_offset = cur_sch_ep->offset;
+ if(cur_sch_ep->repeat == 0){
+ if(ep_interval >= interval){
+ tmp_offset = ep_offset + ep_interval - cur_offset;
+ tmp_interval = interval;
+ }
+ else{
+ tmp_offset = cur_offset + interval - ep_offset;
+ tmp_interval = ep_interval;
+ }
+ if(tmp_offset % tmp_interval == 0){
+ tmp_bw_required += cur_sch_ep->bw_cost;
+ }
+ }
+ else{
+ ep_repeat = cur_sch_ep->repeat;
+ ep_mult = cur_sch_ep->mult;
+ for(k=0; k<=ep_mult; k++){
+ cur_ep_offset = ep_offset+(k*ep_repeat);
+ if(ep_interval >= interval){
+ tmp_offset = cur_ep_offset + ep_interval - cur_offset;
+ tmp_interval = interval;
+ }
+ else{
+ tmp_offset = cur_offset + interval - cur_ep_offset;
+ tmp_interval = ep_interval;
+ }
+ if(tmp_offset % tmp_interval == 0){
+ tmp_bw_required += cur_sch_ep->bw_cost;
+ break;
+ }
+ }
+ }
+ }
+ bw_required[j] = tmp_bw_required;
+ }
+ final_bw_required = SS_BW_BOUND;
+ for(j=0; j<=mult; j++){
+ if(bw_required[j] < final_bw_required){
+ final_bw_required = bw_required[j];
+ }
+ }
+ final_bw_required += bw_required_per_repeat;
+ }
+ return final_bw_required;
+}
+
+int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){
+ int i;
+ int bw_required;
+ struct sch_ep *cur_sch_ep;
+ int tmp_offset;
+ int tmp_interval;
+ int ep_offset;
+ int ep_interval;
+ int cur_tt_isoc_interval; //for isoc tt check
+
+ bw_required = 0;
+ for(i=0; i<MAX_EP_NUM; i++){
+
+ cur_sch_ep = (struct sch_ep *)hs_eps[i];
+ if(cur_sch_ep == NULL){
+ continue;
+ }
+ ep_offset = cur_sch_ep->offset;
+ ep_interval = cur_sch_ep->interval;
+
+ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
+ cur_tt_isoc_interval = ep_interval<<3;
+ if(ep_interval >= interval){
+ tmp_offset = ep_offset + cur_tt_isoc_interval - offset;
+ tmp_interval = interval;
+ }
+ else{
+ tmp_offset = offset + interval - ep_offset;
+ tmp_interval = cur_tt_isoc_interval;
+ }
+ if(cur_sch_ep->is_in){
+ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
+ bw_required += 188;
+ }
+ }
+ else{
+ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
+ bw_required += 188;
+ }
+ }
+ }
+ else{
+ if(ep_interval >= interval){
+ tmp_offset = ep_offset + ep_interval - offset;
+ tmp_interval = interval;
+ }
+ else{
+ tmp_offset = offset + interval - ep_offset;
+ tmp_interval = ep_interval;
+ }
+ if(tmp_offset%tmp_interval == 0){
+ bw_required += cur_sch_ep->bw_cost;
+ }
+ }
+ }
+ bw_required += td_size;
+ return bw_required;
+}
+
+int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){
+ char is_cs;
+ int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe;
+ int bw_required, max_bw;
+ int ss_cs_count;
+ int cs_mframe;
+ int max_frame;
+ int i,j;
+ struct sch_ep *cur_sch_ep;
+ int ep_offset;
+ int ep_interval;
+ int ep_cs_count;
+ int tt_isoc_interval; //for isoc tt check
+ int cur_tt_isoc_interval; //for isoc tt check
+ int tmp_offset;
+ int tmp_interval;
+
+ is_cs = 0;
+
+ tt_isoc_interval = interval<<3; //frame to mframe
+ if(is_in){
+ is_cs = 1;
+ }
+ s_frame = offset/8;
+ s_mframe = offset%8;
+ ss_cs_count = (maxp + (188 - 1))/188;
+ if(is_cs){
+ cs_mframe = offset%8 + 2 + ss_cs_count;
+ if (cs_mframe <= 6)
+ ss_cs_count += 2;
+ else if (cs_mframe == 7)
+ ss_cs_count++;
+ else if (cs_mframe > 8)
+ return -1;
+ }
+ max_bw = 0;
+ if(is_in){
+ i=2;
+ }
+ for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){
+ bw_required = 0;
+ for(j=0; j<MAX_EP_NUM; j++){
+ cur_sch_ep = (struct sch_ep *)hs_eps[j];
+ if(cur_sch_ep == NULL){
+ continue;
+ }
+ ep_offset = cur_sch_ep->offset;
+ ep_interval = cur_sch_ep->interval;
+ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){
+ //isoc tt
+ //check if mframe offset overlap
+ //if overlap, add 188 to the bw
+ cur_tt_isoc_interval = ep_interval<<3;
+ if(cur_tt_isoc_interval >= tt_isoc_interval){
+ tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe;
+ tmp_interval = tt_isoc_interval;
+ }
+ else{
+ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
+ tmp_interval = cur_tt_isoc_interval;
+ }
+ if(cur_sch_ep->is_in){
+ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){
+ bw_required += 188;
+ }
+ }
+ else{
+ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){
+ bw_required += 188;
+ }
+ }
+
+ }
+ else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){
+ //check if mframe
+ if(ep_interval >= tt_isoc_interval){
+ tmp_offset = (ep_offset+ep_interval) - cur_mframe;
+ tmp_interval = tt_isoc_interval;
+ }
+ else{
+ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset;
+ tmp_interval = ep_interval;
+ }
+ if(tmp_offset%tmp_interval == 0){
+ bw_required += cur_sch_ep->bw_cost;
+ }
+ }
+ }
+ bw_required += 188;
+ if(bw_required > max_bw){
+ max_bw = bw_required;
+ }
+ }
+ return max_bw;
+}
+
+int count_tt_intr_bw(int interval, int frame_offset){
+ //check all eps in tt_intr_eps
+ int ret;
+ int i,j;
+ int ep_offset;
+ int ep_interval;
+ int tmp_offset;
+ int tmp_interval;
+ ret = SCH_SUCCESS;
+ struct sch_ep *cur_sch_ep;
+
+ for(i=0; i<MAX_EP_NUM; i++){
+ cur_sch_ep = (struct sch_ep *)tt_intr_eps[i];
+ if(cur_sch_ep == NULL){
+ continue;
+ }
+ ep_offset = cur_sch_ep->offset;
+ ep_interval = cur_sch_ep->interval;
+ if(ep_interval >= interval){
+ tmp_offset = ep_offset + ep_interval - frame_offset;
+ tmp_interval = interval;
+ }
+ else{
+ tmp_offset = frame_offset + interval - ep_offset;
+ tmp_interval = ep_interval;
+ }
+
+ if(tmp_offset%tmp_interval==0){
+ return SCH_FAIL;
+ }
+ }
+ return SCH_SUCCESS;
+}
+
+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){
+ int i;
+ struct sch_ep **ep_array;
+ struct sch_ep *cur_ep;
+
+ if (is_in && dev_speed == USB_SPEED_SUPER) {
+ ep_array = (struct sch_ep **)ss_in_eps;
+ }
+ else if (dev_speed == USB_SPEED_SUPER) {
+ ep_array = (struct sch_ep **)ss_out_eps;
+ }
+ else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) {
+ ep_array = (struct sch_ep **)hs_eps;
+ }
+ else {
+ ep_array = (struct sch_ep **)tt_intr_eps;
+ }
+ for (i = 0; i < MAX_EP_NUM; i++) {
+ cur_ep = (struct sch_ep *)ep_array[i];
+ if(cur_ep != NULL && cur_ep->ep == ep){
+ ep_array[i] = NULL;
+ return cur_ep;
+ }
+ }
+ return NULL;
+}
+
+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
+ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){
+ mtk_u32 bPkts = 0;
+ mtk_u32 bCsCount = 0;
+ mtk_u32 bBm = 1;
+ mtk_u32 bOffset = 0;
+ mtk_u32 bRepeat = 0;
+ int ret;
+ struct mtk_xhci_ep_ctx *temp_ep_ctx;
+ int td_size;
+ int mframe_idx, frame_idx;
+ int bw_cost;
+ int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat;
+ int cur_offset, cs_mframe;
+ int break_out;
+ int frame_interval;
+
+ printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp
+ , interval, burst, mult, ep, ep_ctx, sch_ep);
+ if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){
+ frame_interval = interval >> 3;
+ for(frame_idx=0; frame_idx<frame_interval; frame_idx++){
+ printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx);
+ if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){
+ printk(KERN_ERR "check OK............\n");
+ bOffset = frame_idx<<3;
+ bPkts = 1;
+ bCsCount = 3;
+ bw_cost = maxp;
+ bRepeat = 0;
+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult
+ , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){
+ return SCH_FAIL;
+ }
+ ret = SCH_SUCCESS;
+ break;
+ }
+ }
+ }
+ else if(isTT && ep_type == USB_EP_ISOC){
+ best_bw = HS_BW_BOUND;
+ best_bw_idx = -1;
+ cur_bw = 0;
+ td_size = maxp;
+ break_out = 0;
+ frame_interval = interval>>3;
+ for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){
+ for(mframe_idx=0; mframe_idx<8; mframe_idx++){
+ cur_offset = (frame_idx*8) + mframe_idx;
+ cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size);
+ if(cur_bw > 0 && cur_bw < best_bw){
+ best_bw_idx = cur_offset;
+ best_bw = cur_bw;
+ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
+ break_out = 1;
+ break;
+ }
+ }
+ }
+ }
+ if(best_bw_idx == -1){
+ return SCH_FAIL;
+ }
+ else{
+ bOffset = best_bw_idx;
+ bPkts = 1;
+ bCsCount = (maxp + (188 - 1)) / 188;
+ if(is_in){
+ cs_mframe = bOffset%8 + 2 + bCsCount;
+ if (cs_mframe <= 6)
+ bCsCount += 2;
+ else if (cs_mframe == 7)
+ bCsCount++;
+ }
+ bw_cost = 188;
+ bRepeat = 0;
+ if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
+ return SCH_FAIL;
+ }
+ ret = SCH_SUCCESS;
+ }
+ }
+ else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){
+ bPkts = 1;
+ ret = SCH_SUCCESS;
+ }
+ else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){
+ bPkts = 1;
+ ret = SCH_SUCCESS;
+ }
+ else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
+ best_bw = HS_BW_BOUND;
+ best_bw_idx = -1;
+ cur_bw = 0;
+ td_size = maxp*(burst+1);
+ for(cur_offset = 0; cur_offset<interval; cur_offset++){
+ cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size);
+ if(cur_bw > 0 && cur_bw < best_bw){
+ best_bw_idx = cur_offset;
+ best_bw = cur_bw;
+ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){
+ break;
+ }
+ }
+ }
+ if(best_bw_idx == -1){
+ return SCH_FAIL;
+ }
+ else{
+ bOffset = best_bw_idx;
+ bPkts = burst + 1;
+ bCsCount = 0;
+ bw_cost = td_size;
+ bRepeat = 0;
+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
+ return SCH_FAIL;
+ }
+ ret = SCH_SUCCESS;
+ }
+ }
+ else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){
+ best_bw = SS_BW_BOUND;
+ best_bw_idx = -1;
+ cur_bw = 0;
+ td_size = maxp * (mult+1) * (burst+1);
+ if(mult == 0){
+ max_repeat = 0;
+ }
+ else{
+ max_repeat = (interval-1)/(mult+1);
+ }
+ break_out = 0;
+ for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){
+ for(repeat = max_repeat; repeat >= 0; repeat--){
+ cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx
+ , repeat, td_size);
+ printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n"
+ , frame_idx, repeat, td_size, cur_bw);
+ if(cur_bw > 0 && cur_bw < best_bw){
+ best_bw_idx = frame_idx;
+ best_bw_repeat = repeat;
+ best_bw = cur_bw;
+ if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){
+ break_out = 1;
+ break;
+ }
+ }
+ }
+ }
+ printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat);
+ if(best_bw_idx == -1){
+ return SCH_FAIL;
+ }
+ else{
+ bOffset = best_bw_idx;
+ bCsCount = 0;
+ bRepeat = best_bw_repeat;
+ if(bRepeat == 0){
+ bw_cost = (burst+1)*(mult+1)*maxp;
+ bPkts = (burst+1)*(mult+1);
+ }
+ else{
+ bw_cost = (burst+1)*maxp;
+ bPkts = (burst+1);
+ }
+ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult
+ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){
+ return SCH_FAIL;
+ }
+ ret = SCH_SUCCESS;
+ }
+ }
+ else{
+ bPkts = 1;
+ ret = SCH_SUCCESS;
+ }
+ if(ret == SCH_SUCCESS){
+ temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx;
+ temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm));
+ temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat));
+
+ printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm);
+ printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat);
+ return SCH_SUCCESS;
+ }
+ else{
+ return SCH_FAIL;
+ }
+}
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-scheduler.h
@@ -0,0 +1,77 @@
+#ifndef _XHCI_MTK_SCHEDULER_H
+#define _XHCI_MTK_SCHEDULER_H
+
+#define MTK_SCH_NEW 1
+
+#define SCH_SUCCESS 1
+#define SCH_FAIL 0
+
+#define MAX_EP_NUM 64
+#define SS_BW_BOUND 51000
+#define HS_BW_BOUND 6144
+
+#define USB_EP_CONTROL 0
+#define USB_EP_ISOC 1
+#define USB_EP_BULK 2
+#define USB_EP_INT 3
+
+#define USB_SPEED_LOW 1
+#define USB_SPEED_FULL 2
+#define USB_SPEED_HIGH 3
+#define USB_SPEED_SUPER 5
+
+/* mtk scheduler bitmasks */
+#define BPKTS(p) ((p) & 0x3f)
+#define BCSCOUNT(p) (((p) & 0x7) << 8)
+#define BBM(p) ((p) << 11)
+#define BOFFSET(p) ((p) & 0x3fff)
+#define BREPEAT(p) (((p) & 0x7fff) << 16)
+
+
+#if 1
+typedef unsigned int mtk_u32;
+typedef unsigned long long mtk_u64;
+#endif
+
+#define NULL ((void *)0)
+
+struct mtk_xhci_ep_ctx {
+ mtk_u32 ep_info;
+ mtk_u32 ep_info2;
+ mtk_u64 deq;
+ mtk_u32 tx_info;
+ /* offset 0x14 - 0x1f reserved for HC internal use */
+ mtk_u32 reserved[3];
+};
+
+
+struct sch_ep
+{
+ //device info
+ int dev_speed;
+ int isTT;
+ //ep info
+ int is_in;
+ int ep_type;
+ int maxp;
+ int interval;
+ int burst;
+ int mult;
+ //scheduling info
+ int offset;
+ int repeat;
+ int pkts;
+ int cs_count;
+ int burst_mode;
+ //other
+ int bw_cost; //bandwidth cost in each repeat; including overhead
+ mtk_u32 *ep; //address of usb_endpoint pointer
+};
+
+int mtk_xhci_scheduler_init(void);
+int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst
+ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep);
+struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep);
+
+
+#endif
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk.c
@@ -0,0 +1,265 @@
+#include "xhci-mtk.h"
+#include "xhci-mtk-power.h"
+#include "xhci.h"
+#include "mtk-phy.h"
+#ifdef CONFIG_C60802_SUPPORT
+#include "mtk-phy-c60802.h"
+#endif
+#include "xhci-mtk-scheduler.h"
+#include <linux/kernel.h> /* printk() */
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+void setInitialReg(void )
+{
+ __u32 __iomem *addr;
+ u32 temp;
+
+ /* set SSUSB DMA burst size to 128B */
+ addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG;
+ temp = SSUSB_HDMA_CFG_MT7621_VALUE;
+ writel(temp, addr);
+
+ /* extend U3 LTSSM Polling.LFPS timeout value */
+ addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3;
+ temp = U3_LTSSM_TIMING_PARAMETER3_VALUE;
+ writel(temp, addr);
+
+ /* EOF */
+ addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF;
+ temp = SYNC_HS_EOF_VALUE;
+ writel(temp, addr);
+
+#if defined (CONFIG_PERIODIC_ENP)
+ /* HSCH_CFG1: SCH2_FIFO_DEPTH */
+ addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1;
+ temp = readl(addr);
+ temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET);
+ writel(temp, addr);
+#endif
+
+ /* Doorbell handling */
+ addr = SIFSLV_IPPC + SSUSB_IP_SPAR0;
+ temp = 0x1;
+ writel(temp, addr);
+
+ /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */
+ /* Port 0 */
+ addr = U2_PHY_BASE + U2_PHYD_CR1;
+ temp = readl(addr);
+ temp &= ~(0x3 << 18);
+ temp |= (1 << 18);
+ writel(temp, addr);
+
+ /* Port 1 */
+ addr = U2_PHY_BASE_P1 + U2_PHYD_CR1;
+ temp = readl(addr);
+ temp &= ~(0x3 << 18);
+ temp |= (1 << 18);
+ writel(temp, addr);
+}
+
+
+void setLatchSel(void){
+ __u32 __iomem *latch_sel_addr;
+ u32 latch_sel_value;
+ latch_sel_addr = U3_PIPE_LATCH_SEL_ADD;
+ latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX);
+ writel(latch_sel_value, latch_sel_addr);
+}
+
+void reinitIP(void){
+ __u32 __iomem *ip_reset_addr;
+ u32 ip_reset_value;
+
+ enableAllClockPower();
+ mtk_xhci_scheduler_init();
+}
+
+void dbg_prb_out(void){
+ mtk_probe_init(0x0f0f0f0f);
+ mtk_probe_out(0xffffffff);
+ mtk_probe_out(0x01010101);
+ mtk_probe_out(0x02020202);
+ mtk_probe_out(0x04040404);
+ mtk_probe_out(0x08080808);
+ mtk_probe_out(0x10101010);
+ mtk_probe_out(0x20202020);
+ mtk_probe_out(0x40404040);
+ mtk_probe_out(0x80808080);
+ mtk_probe_out(0x55555555);
+ mtk_probe_out(0xaaaaaaaa);
+}
+
+
+
+///////////////////////////////////////////////////////////////////////////////
+
+#define RET_SUCCESS 0
+#define RET_FAIL 1
+
+static int dbg_u3w(int argc, char**argv)
+{
+ int u4TimingValue;
+ char u1TimingValue;
+ int u4TimingAddress;
+
+ if (argc<3)
+ {
+ printk(KERN_ERR "Arg: address value\n");
+ return RET_FAIL;
+ }
+ u3phy_init();
+
+ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
+ u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16);
+ u1TimingValue = u4TimingValue & 0xff;
+ /* access MMIO directly */
+ writel(u1TimingValue, u4TimingAddress);
+ printk(KERN_ERR "Write done\n");
+ return RET_SUCCESS;
+
+}
+
+static int dbg_u3r(int argc, char**argv)
+{
+ char u1ReadTimingValue;
+ int u4TimingAddress;
+ if (argc<2)
+ {
+ printk(KERN_ERR "Arg: address\n");
+ return 0;
+ }
+ u3phy_init();
+ mdelay(500);
+ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16);
+ /* access MMIO directly */
+ u1ReadTimingValue = readl(u4TimingAddress);
+ printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue);
+ return 0;
+}
+
+static int dbg_u3init(int argc, char**argv)
+{
+ int ret;
+ ret = u3phy_init();
+ printk(KERN_ERR "phy registers and operations initial done\n");
+ if(u3phy_ops->u2_slew_rate_calibration){
+ u3phy_ops->u2_slew_rate_calibration(u3phy);
+ }
+ else{
+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
+ }
+ if(u3phy_ops->init(u3phy) == PHY_TRUE)
+ return RET_SUCCESS;
+ return RET_FAIL;
+}
+
+void dbg_setU1U2(int argc, char**argv){
+ struct xhci_hcd *xhci;
+ int u1_value;
+ int u2_value;
+ u32 port_id, temp;
+ u32 __iomem *addr;
+
+ if (argc<3)
+ {
+ printk(KERN_ERR "Arg: u1value u2value\n");
+ return RET_FAIL;
+ }
+
+ u1_value = (int)simple_strtol(argv[1], &argv[1], 10);
+ u2_value = (int)simple_strtol(argv[2], &argv[2], 10);
+ addr = (SSUSB_U3_XHCI_BASE + 0x424);
+ temp = readl(addr);
+ temp = temp & (~(0x0000ffff));
+ temp = temp | u1_value | (u2_value<<8);
+ writel(temp, addr);
+}
+///////////////////////////////////////////////////////////////////////////////
+
+int call_function(char *buf)
+{
+ int i;
+ int argc;
+ char *argv[80];
+
+ argc = 0;
+ do
+ {
+ argv[argc] = strsep(&buf, " ");
+ printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]);
+ argc++;
+ } while (buf);
+ if (!strcmp("dbg.r", argv[0]))
+ dbg_prb_out();
+ else if (!strcmp("dbg.u3w", argv[0]))
+ dbg_u3w(argc, argv);
+ else if (!strcmp("dbg.u3r", argv[0]))
+ dbg_u3r(argc, argv);
+ else if (!strcmp("dbg.u3i", argv[0]))
+ dbg_u3init(argc, argv);
+ else if (!strcmp("pw.u1u2", argv[0]))
+ dbg_setU1U2(argc, argv);
+ return 0;
+}
+
+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ char w_buf[200];
+ char r_buf[200] = "this is a test";
+ int len = 200;
+
+ switch (cmd) {
+ case IOCTL_READ:
+ copy_to_user((char *) arg, r_buf, len);
+ printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf);
+ break;
+ case IOCTL_WRITE:
+ copy_from_user(w_buf, (char *) arg, len);
+ printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf);
+
+ //invoke function
+ return call_function(w_buf);
+ break;
+ default:
+ return -ENOTTY;
+ }
+
+ return len;
+}
+
+int xhci_mtk_test_open(struct inode *inode, struct file *file)
+{
+
+ printk(KERN_DEBUG "xhci_mtk_test open: successful\n");
+ return 0;
+}
+
+int xhci_mtk_test_release(struct inode *inode, struct file *file)
+{
+
+ printk(KERN_DEBUG "xhci_mtk_test release: successful\n");
+ return 0;
+}
+
+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr)
+{
+
+ printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n");
+ return 0;
+}
+
+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos)
+{
+
+ printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n");
+ return 0;
+}
+
+
+
+
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk.h
@@ -0,0 +1,120 @@
+#ifndef _XHCI_MTK_H
+#define _XHCI_MTK_H
+
+#include <linux/usb.h>
+#include "xhci.h"
+
+#define SSUSB_U3_XHCI_BASE 0xBE1C0000
+#define SSUSB_U3_MAC_BASE 0xBE1C2400
+#define SSUSB_U3_SYS_BASE 0xBE1C2600
+#define SSUSB_U2_SYS_BASE 0xBE1C3400
+#define SSUB_SIF_SLV_TOP 0xBE1D0000
+#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700)
+
+#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130
+#define U3_PIPE_LATCH_TX 0
+#define U3_PIPE_LATCH_RX 0
+
+#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0
+#define U3_REF_CK_PAR 0xb0
+#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8
+#define U3_RX_UX_EXIT_LFPS_REF 3
+#define U3_REF_CK_VAL 10
+
+#define U3_TIMING_PULSE_CTRL 0xb4
+#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125
+
+#define USB20_TIMING_PARAMETER 0x40
+#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125
+
+#define LINK_PM_TIMER 0x8
+#define PM_LC_TIMEOUT_VALUE 3
+
+#define XHCI_IMOD 0x624
+#define XHCI_IMOD_MT7621_VALUE 0x10
+
+#define SSUSB_HDMA_CFG 0x950
+#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C
+
+#define U3_LTSSM_TIMING_PARAMETER3 0x2514
+#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C
+
+#define U2_PHYD_CR1 0x64
+
+#define SSUSB_IP_SPAR0 0xC8
+
+#define SYNC_HS_EOF 0x938
+#define SYNC_HS_EOF_VALUE 0x201F3
+
+#define HSCH_CFG1 0x960
+#define SCH2_FIFO_DEPTH_OFFSET 16
+
+
+#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0)
+#define SSUSB_IP_SW_RST (1<<0)
+#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4)
+#define SSUSB_IP_PDN (1<<0)
+#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08))
+#define SSUSB_U3_PORT_DIS (1<<0)
+#define SSUSB_U3_PORT_PDN (1<<1)
+#define SSUSB_U3_PORT_HOST_SEL (1<<2)
+#define SSUSB_U3_PORT_CKBG_EN (1<<3)
+#define SSUSB_U3_PORT_MAC_RST (1<<4)
+#define SSUSB_U3_PORT_PHYD_RST (1<<5)
+#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08))
+#define SSUSB_U2_PORT_DIS (1<<0)
+#define SSUSB_U2_PORT_PDN (1<<1)
+#define SSUSB_U2_PORT_HOST_SEL (1<<2)
+#define SSUSB_U2_PORT_CKBG_EN (1<<3)
+#define SSUSB_U2_PORT_MAC_RST (1<<4)
+#define SSUSB_U2_PORT_PHYD_RST (1<<5)
+#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024)
+
+#define SSUSB_U3_PORT_NUM(p) (p & 0xff)
+#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff)
+
+
+#define XHCI_MTK_TEST_MAJOR 234
+#define DEVICE_NAME "xhci_mtk_test"
+
+#define CLI_MAGIC 'CLI'
+#define IOCTL_READ _IOR(CLI_MAGIC, 0, int)
+#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int)
+
+void reinitIP(void);
+void setInitialReg(void);
+void dbg_prb_out(void);
+int call_function(char *buf);
+
+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+int xhci_mtk_test_open(struct inode *inode, struct file *file);
+int xhci_mtk_test_release(struct inode *inode, struct file *file);
+ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr);
+ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos);
+
+/*
+ mediatek probe out
+*/
+/************************************************************************************/
+
+#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0)
+#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc)
+
+static inline void mtk_probe_init(const u32 byte){
+ __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR;
+ writel(byte, ptr);
+}
+
+static inline void mtk_probe_out(const u32 value){
+ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
+ writel(value, ptr);
+}
+
+static inline u32 mtk_probe_value(void){
+ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR;
+
+ return readl(ptr);
+}
+
+
+#endif
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -33,6 +33,13 @@ static void xhci_plat_quirks(struct devi
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ /* MTK host controller gives a spurious successful event after a
+ * short transfer. Ignore it.
+ */
+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
+ xhci->quirks |= XHCI_LPM_SUPPORT;
+#endif
}
/* called during probe() after chip reset completes */
@@ -79,7 +86,11 @@ static int xhci_plat_probe(struct platfo
driver = &xhci_plat_hc_driver;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ irq = XHC_IRQ;
+#else
irq = platform_get_irq(pdev, 0);
+#endif
if (irq < 0)
return -ENODEV;
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -254,16 +254,20 @@ static void inc_enq(struct xhci_hcd *xhc
static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs)
{
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
int num_trbs_in_deq_seg;
+#endif
if (ring->num_trbs_free < num_trbs)
return 0;
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
return 0;
}
+#endif
return 1;
}
@@ -2810,6 +2814,7 @@ static int prepare_ring(struct xhci_hcd
next = ring->enqueue;
while (last_trb(xhci, ring, ring->enq_seg, next)) {
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
/* If we're not dealing with 0.95 hardware or isoc rings
* on AMD 0.96 host, clear the chain bit.
*/
@@ -2819,6 +2824,9 @@ static int prepare_ring(struct xhci_hcd
next->link.control &= cpu_to_le32(~TRB_CHAIN);
else
next->link.control |= cpu_to_le32(TRB_CHAIN);
+#else
+ next->link.control &= cpu_to_le32(~TRB_CHAIN);
+#endif
wmb();
next->link.control ^= cpu_to_le32(TRB_CYCLE);
@@ -2949,6 +2957,9 @@ static void giveback_first_trb(struct xh
start_trb->field[3] |= cpu_to_le32(start_cycle);
else
start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ wmb();
+#endif
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
}
@@ -3004,6 +3015,29 @@ static u32 xhci_td_remainder(unsigned in
return (remainder >> 10) << 17;
}
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length)
+{
+ u32 max = 31;
+ int remainder, td_packet_count, packet_transferred;
+
+ //0 for the last TRB
+ //FIXME: need to workaround if there is ZLP in this TD
+ if (td_running_total + trb_buffer_length == td_transfer_size)
+ return 0;
+
+ //FIXME: need to take care of high-bandwidth (MAX_ESIT)
+ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp;
+ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp);
+ remainder = td_packet_count - packet_transferred;
+
+ if (remainder > max)
+ return max << 17;
+ else
+ return remainder << 17;
+}
+#endif
+
/*
* For xHCI 1.0 host controllers, TD size is the number of max packet sized
* packets remaining in the TD (*not* including this TRB).
@@ -3141,6 +3175,7 @@ static int queue_bulk_sg_tx(struct xhci_
}
/* Set the TRB length, TD size, and interrupter fields. */
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
urb->transfer_buffer_length -
@@ -3150,6 +3185,12 @@ static int queue_bulk_sg_tx(struct xhci_
trb_buff_len, total_packet_count, urb,
num_trbs - 1);
}
+#else
+ if (num_trbs > 1)
+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length,
+ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len);
+#endif
+
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
@@ -3212,6 +3253,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
int running_total, trb_buff_len, ret;
unsigned int total_packet_count;
u64 addr;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ int max_packet;
+#endif
if (urb->num_sgs)
return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
@@ -3237,6 +3281,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
running_total += TRB_MAX_BUFF_SIZE;
}
/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ switch(urb->dev->speed){
+ case USB_SPEED_SUPER:
+ max_packet = urb->ep->desc.wMaxPacketSize;
+ break;
+ case USB_SPEED_HIGH:
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
+ case USB_SPEED_WIRELESS:
+ case USB_SPEED_UNKNOWN:
+ default:
+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
+ break;
+ }
+ if((urb->transfer_flags & URB_ZERO_PACKET)
+ && ((urb->transfer_buffer_length % max_packet) == 0)){
+ num_trbs++;
+ }
+#endif
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
@@ -3296,6 +3359,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
field |= TRB_ISP;
/* Set the TRB length, TD size, and interrupter fields. */
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
urb->transfer_buffer_length -
@@ -3305,6 +3369,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
trb_buff_len, total_packet_count, urb,
num_trbs - 1);
}
+#else
+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
+#endif
+
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
@@ -3394,7 +3462,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
field |= 0x1;
/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (1) {
+#else
if (xhci->hci_version == 0x100) {
+#endif
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_TX_TYPE(TRB_DATA_IN);
@@ -3418,7 +3490,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
field = TRB_TYPE(TRB_DATA);
length_field = TRB_LEN(urb->transfer_buffer_length) |
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
xhci_td_remainder(urb->transfer_buffer_length) |
+#else
+ //CC: MTK style, no scatter-gather for control transfer
+ 0 |
+#endif
TRB_INTR_TARGET(0);
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
@@ -3541,6 +3618,9 @@ static int xhci_queue_isoc_tx(struct xhc
u64 start_addr, addr;
int i, j;
bool more_trbs_coming;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ int max_packet;
+#endif
ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
@@ -3554,6 +3634,21 @@ static int xhci_queue_isoc_tx(struct xhc
start_trb = &ep_ring->enqueue->generic;
start_cycle = ep_ring->cycle_state;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ switch(urb->dev->speed){
+ case USB_SPEED_SUPER:
+ max_packet = urb->ep->desc.wMaxPacketSize;
+ break;
+ case USB_SPEED_HIGH:
+ case USB_SPEED_FULL:
+ case USB_SPEED_LOW:
+ case USB_SPEED_WIRELESS:
+ case USB_SPEED_UNKNOWN:
+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff;
+ break;
+ }
+#endif
+
urb_priv = urb->hcpriv;
/* Queue the first TRB, even if it's zero-length */
for (i = 0; i < num_tds; i++) {
@@ -3625,9 +3720,13 @@ static int xhci_queue_isoc_tx(struct xhc
} else {
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (!(xhci->quirks & XHCI_AVOID_BEI)) {
+#else
if (xhci->hci_version == 0x100 &&
!(xhci->quirks &
XHCI_AVOID_BEI)) {
+#endif
/* Set BEI bit except for the last td */
if (i < num_tds - 1)
field |= TRB_BEI;
@@ -3642,6 +3741,7 @@ static int xhci_queue_isoc_tx(struct xhc
trb_buff_len = td_remain_len;
/* Set the TRB length, TD size, & interrupter fields. */
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
td_len - running_total);
@@ -3651,6 +3751,10 @@ static int xhci_queue_isoc_tx(struct xhc
total_packet_count, urb,
(trbs_per_td - j - 1));
}
+#else
+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len);
+#endif
+
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -32,6 +32,16 @@
#include "xhci.h"
#include "xhci-trace.h"
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#include <asm/uaccess.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include "mtk-phy.h"
+#include "xhci-mtk-scheduler.h"
+#include "xhci-mtk-power.h"
+#include "xhci-mtk.h"
+#endif
+
#define DRIVER_AUTHOR "Sarah Sharp"
#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
@@ -46,6 +56,18 @@ static unsigned int quirks;
module_param(quirks, uint, S_IRUGO);
MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
+static struct file_operations xhci_mtk_test_fops = {
+ .owner = THIS_MODULE,
+ .read = xhci_mtk_test_read,
+ .write = xhci_mtk_test_write,
+ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl,
+ .open = xhci_mtk_test_open,
+ .release = xhci_mtk_test_release,
+};
+#endif
+
/* TODO: copied from ehci-hcd.c - can this be refactored? */
/*
* xhci_handshake - spin reading hc until handshake completes or fails
@@ -198,7 +220,7 @@ int xhci_reset(struct xhci_hcd *xhci)
return ret;
}
-#ifdef CONFIG_PCI
+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
static int xhci_free_msi(struct xhci_hcd *xhci)
{
int i;
@@ -448,6 +470,11 @@ static void compliance_mode_recovery(uns
"Attempting compliance mode recovery");
hcd = xhci->shared_hcd;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ temp |= (1 << 31);
+ writel(temp, xhci->usb3_ports[i]);
+#endif
+
if (hcd->state == HC_STATE_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
@@ -497,6 +524,9 @@ static bool xhci_compliance_mode_recover
{
const char *dmi_product_name, *dmi_sys_vendor;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ return true;
+#endif
dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
if (!dmi_product_name || !dmi_sys_vendor)
@@ -542,6 +572,10 @@ int xhci_init(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xHCI doesn't need link TRB QUIRK");
}
+
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ mtk_xhci_scheduler_init();
+#endif
retval = xhci_mem_init(xhci, GFP_KERNEL);
xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init");
@@ -626,7 +660,11 @@ int xhci_run(struct usb_hcd *hcd)
"// Set the interrupt modulation register");
temp = readl(&xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ temp |= (u32) 16;
+#else
temp |= (u32) 160;
+#endif
writel(temp, &xhci->ir_set->irq_control);
/* Set the HCD state before we enable the irqs */
@@ -651,6 +689,9 @@ int xhci_run(struct usb_hcd *hcd)
xhci_queue_vendor_command(xhci, command, 0, 0, 0,
TRB_TYPE(TRB_NEC_GET_FW));
}
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ enableXhciAllPortPower(xhci);
+#endif
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Finished xhci_run for USB2 roothub");
return 0;
@@ -1642,6 +1683,14 @@ int xhci_drop_endpoint(struct usb_hcd *h
u32 drop_flag;
u32 new_add_flags, new_drop_flags;
int ret;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#if MTK_SCH_NEW
+ struct xhci_slot_ctx *slot_ctx;
+ struct sch_ep *sch_ep = NULL;
+ int isTT;
+ int ep_type;
+#endif
+#endif
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
if (ret <= 0)
@@ -1689,6 +1738,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#if MTK_SCH_NEW
+ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx);
+ if ((slot_ctx->tt_info & 0xff) > 0) {
+ isTT = 1;
+ }
+ else {
+ isTT = 0;
+ }
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ ep_type = USB_EP_INT;
+ }
+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
+ ep_type = USB_EP_ISOC;
+ }
+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
+ ep_type = USB_EP_BULK;
+ }
+ else
+ ep_type = USB_EP_CONTROL;
+
+ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc)
+ , isTT, ep_type, (mtk_u32 *)ep);
+ if (sch_ep != NULL) {
+ kfree(sch_ep);
+ }
+ else {
+ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n");
+ }
+#else
+ mtk_xhci_scheduler_remove_ep(xhci, udev, ep);
+#endif
+#endif
+
xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
udev->slot_id,
@@ -1721,6 +1804,19 @@ int xhci_add_endpoint(struct usb_hcd *hc
u32 new_add_flags, new_drop_flags;
struct xhci_virt_device *virt_dev;
int ret = 0;
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ struct xhci_ep_ctx *in_ep_ctx;
+#if MTK_SCH_NEW
+ struct xhci_slot_ctx *slot_ctx;
+ struct sch_ep *sch_ep;
+ int isTT;
+ int ep_type;
+ int maxp = 0;
+ int burst = 0;
+ int mult = 0;
+ int interval;
+#endif
+#endif
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
if (ret <= 0) {
@@ -1787,6 +1883,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
return -ENOMEM;
}
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index);
+#if MTK_SCH_NEW
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ if ((slot_ctx->tt_info & 0xff) > 0) {
+ isTT = 1;
+ }
+ else {
+ isTT = 0;
+ }
+ if (usb_endpoint_xfer_int(&ep->desc)) {
+ ep_type = USB_EP_INT;
+ }
+ else if (usb_endpoint_xfer_isoc(&ep->desc)) {
+ ep_type = USB_EP_ISOC;
+ }
+ else if (usb_endpoint_xfer_bulk(&ep->desc)) {
+ ep_type = USB_EP_BULK;
+ }
+ else
+ ep_type = USB_EP_CONTROL;
+
+ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH
+ || udev->speed == USB_SPEED_LOW) {
+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
+ burst = ep->desc.wMaxPacketSize >> 11;
+ mult = 0;
+ }
+ else if (udev->speed == USB_SPEED_SUPER) {
+ maxp = ep->desc.wMaxPacketSize & 0x7FF;
+ burst = ep->ss_ep_comp.bMaxBurst;
+ mult = ep->ss_ep_comp.bmAttributes & 0x3;
+ }
+ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff));
+ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL);
+ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc),
+ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep
+ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) {
+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
+
+ return -ENOSPC;
+ }
+#else
+ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) {
+ xhci_err(xhci, "[MTK] not enough bandwidth\n");
+
+ return -ENOSPC;
+ }
+#endif
+#endif
ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
@@ -4454,8 +4600,14 @@ static u16 xhci_call_host_update_timeout
u16 *timeout)
{
if (state == USB3_LPM_U1)
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->quirks & XHCI_INTEL_HOST)
+#endif
return xhci_calculate_u1_timeout(xhci, udev, desc);
else if (state == USB3_LPM_U2)
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ if (xhci->quirks & XHCI_INTEL_HOST)
+#endif
return xhci_calculate_u2_timeout(xhci, udev, desc);
return USB3_LPM_DISABLED;
@@ -4840,7 +4992,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
hcd->self.no_sg_constraint = 1;
/* XHCI controllers don't stop the ep queue on short packets :| */
+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
hcd->self.no_stop_on_short = 1;
+#endif
if (usb_hcd_is_primary_hcd(hcd)) {
xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
@@ -4903,6 +5057,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
goto error;
xhci_dbg(xhci, "Reset complete\n");
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ setInitialReg();
+#endif
+
/* Set dma_mask and coherent_dma_mask to 64-bits,
* if xHC supports 64-bit addressing */
if (HCC_64BIT_ADDR(xhci->hcc_params) &&
@@ -4997,8 +5155,57 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+static struct resource xhci_resouce[] = {
+ {
+ .name = "xhci-hcd",
+ .start = XHC_IO_START,
+ .end = XHC_IO_START + XHC_IO_LENGTH -1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device xhci_platform_dev = {
+ .name = "xhci-hcd",
+ .id = -1,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .resource = xhci_resouce,
+};
+#endif
+
static int __init xhci_hcd_init(void)
{
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+ struct platform_device *pPlatformDev;
+
+ register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops);
+
+ u3phy_init();
+ if (u3phy_ops->u2_slew_rate_calibration) {
+ u3phy_ops->u2_slew_rate_calibration(u3phy);
+ u3phy_ops->u2_slew_rate_calibration(u3phy_p1);
+ }
+ else{
+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n");
+ }
+ u3phy_ops->init(u3phy);
+ reinitIP();
+
+ pPlatformDev = &xhci_platform_dev;
+ memset(pPlatformDev, 0, sizeof(struct platform_device));
+ pPlatformDev->name = "xhci-hcd";
+ pPlatformDev->id = -1;
+ pPlatformDev->dev.coherent_dma_mask = 0xffffffff;
+ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask;
+ pPlatformDev->resource = xhci_resouce;
+ pPlatformDev->num_resources = ARRAY_SIZE(xhci_resouce);
+
+ platform_device_register(&xhci_platform_dev);
+
+#endif
+
/*
* Check the compiler generated sizes of structures that must be laid
* out in specific ways for hardware access.
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -33,6 +33,21 @@
#include "xhci-ext-caps.h"
#include "pci-quirks.h"
+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+#define XHC_IRQ (22 + 8)
+#define XHC_IO_START 0x1E1C0000
+#define XHC_IO_LENGTH 0x10000
+/* mtk scheduler bitmasks */
+#define BPKTS(p) ((p) & 0x3f)
+#define BCSCOUNT(p) (((p) & 0x7) << 8)
+#define BBM(p) ((p) << 11)
+#define BOFFSET(p) ((p) & 0x3fff)
+#define BREPEAT(p) (((p) & 0x7fff) << 16)
+#endif
+
+
+
+
/* xHCI PCI Configuration Registers */
#define XHCI_SBRN_OFFSET (0x60)
@@ -1587,8 +1602,12 @@ struct xhci_hcd {
/* Compliance Mode Recovery Data */
struct timer_list comp_mode_recovery_timer;
u32 port_status_u0;
+#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM
+#define COMP_MODE_RCVRY_MSECS 5000
+#else
/* Compliance Mode Timer Triggered every 2 seconds */
#define COMP_MODE_RCVRY_MSECS 2000
+#endif
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
@@ -1736,6 +1755,26 @@ void xhci_urb_free_priv(struct xhci_hcd
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command);
+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
+/* xHCI PCI glue */
+int xhci_register_pci(void);
+void xhci_unregister_pci(void);
+#else
+static inline int xhci_register_pci(void) { return 0; }
+static inline void xhci_unregister_pci(void) {}
+#endif
+
+#if defined(CONFIG_USB_XHCI_PLATFORM) \
+ || defined(CONFIG_USB_XHCI_PLATFORM_MODULE)
+int xhci_register_plat(void);
+void xhci_unregister_plat(void);
+#else
+static inline int xhci_register_plat(void)
+{ return 0; }
+static inline void xhci_unregister_plat(void)
+{ }
+#endif
+
/* xHCI host controller glue */
typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
Reference in New Issue View Git Blame Copy Permalink