openwrt/target/linux/bmips/image
Daniel González Cabanelas e1a55de7a7 bmips: add support for Actiontec R1000H
The  Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with
two external antennas. It comes with a coaxial HomePNA port.

Hardware:
 - SoC: Broadcom BCM6368
 - CPU: dual core BMIPS4350 V3.1 @400Mhz
 - RAM: 64 MB DDR
 - Flash: 32 MB parallel NOR
 - LAN switch: Broadcom BCM53115, 5x 1Gbit
 - LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213
 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn
 - USB: 1x 2.0
 - Buttons: 2x, 1 reset
 - LEDs: 7x
 - UART: yes

The HPNA hardware probably needs a firmware to make the coaxial port work.
In the OEM firmware, it's apparently sent with an utility (inhpna) through
the ethernet port.

Installation via CFE web UI:
  1. Connect the UART serial port.
  2. Power on the router and press enter at the console prompt to stop the
     bootloader.
  4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware
  5. Wait a few minutes for it to finish

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-15 17:58:58 +02:00
..
lzma-loader bmips: add new target 2021-02-22 18:29:44 +01:00
bcm6318.mk bmips: switch to generic bcma/ssb fallback SPROM 2023-04-23 12:18:35 +02:00
bcm6328.mk bmips: add support for Comtrend AR-5381u 2023-06-12 18:53:00 +02:00
bcm6358.mk bmips: add subtargets for each SoC 2023-04-10 10:04:08 +02:00
bcm6362.mk bmips: dgnd3700v2: add b43 wireless driver 2023-04-23 12:19:02 +02:00
bcm6368.mk bmips: add support for Actiontec R1000H 2023-06-15 17:58:58 +02:00
bcm63268.mk bmips: shg2500: add BCM4360 fallback SPROM 2023-04-23 12:19:02 +02:00
Makefile bmips: image: rename Device/bcm63xx_netgear 2023-06-11 10:17:50 +02:00