openwrt/target/linux/ath79/dts/qca9563_asus_rp-ac66.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include "qca956x.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

/ {
	model = "ASUS RP-AC66";
	compatible = "asus,rp-ac66", "qca,qca9563";

	aliases {
		led-boot = &led_orange;
		led-failsafe = &led_orange;
		led-running = &led_power;
		led-upgrade = &led_orange;
		label-mac-device = &eth0;
	};

	leds {
		compatible = "gpio-leds";

		led_power: power {
			label = "green:power";
			gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
		};

		led_orange: wps {
			label = "orange:wps";
			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
		};

		rssilow-wlan0 {
			label = "blue:rssilow-wlan0";
			gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
		};

		rssimedium-wlan0 {
			label = "red:rssimedium-wlan0";
			gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
		};

		rssihigh-wlan0 {
			label = "green:rssihigh-wlan0";
			gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
		};

		rssilow-wlan1 {
			label = "blue:rssilow-wlan1";
			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
		};

		rssimedium-wlan1 {
			label = "red:rssimedium-wlan1";
			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
		};

		rssihigh-wlan1 {
			label = "green:rssihigh-wlan1";
			gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
		};
	};

	keys {
		compatible = "gpio-keys";

		wps {
			linux,code = <KEY_WPS_BUTTON>;
			gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};

		reset {
			linux,code = <KEY_RESTART>;
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
			debounce-interval = <60>;
		};
	};
};

&pcie {
	status = "okay";
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <50000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x40000>;
				read-only;
			};

			partition@40000 {
				label = "u-boot-env";
				reg = <0x040000 0x10000>;
				read-only;
			};

			art: partition@50000 {
				label = "art";
				reg = <0x050000 0x10000>;
				read-only;

				compatible = "nvmem-cells";
				#address-cells = <1>;
				#size-cells = <1>;

				macaddr_art_1002: macaddr@1002 {
					reg = <0x1002 0x6>;
				};
			};

			partition@60000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x060000 0xfa0000>;
			};
		};
	};
};

&mdio0 {
	status = "okay";

	phy0: ethernet-phy@3 {
		reg = <0x3>;
		phy-mode = "sgmii";
		qca,mib-poll-interval = <500>;
	};
};

&eth0 {
	status = "okay";

	phy-mode = "sgmii";
	nvmem-cells = <&macaddr_art_1002>;
	nvmem-cell-names = "mac-address";
	phy-handle = <&phy0>;
};

&wmac {
	status = "okay";

	qca,no-eeprom;
};