mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
2a20dc717a
Driver for both soc (2.4GHz Wifi) and pci (5 GHz) now pull the calibration data from the nvmem subsystem. This allows us to move the userspace caldata extraction for the pci-e ath9k supported wifi into the device-tree definition of the device. Currently, "mac-address-ascii" cells only works for ethernet and wmac devices, so PCI ath9k device uses the old method to calibrate. Signed-off-by: Edward Chow <equu@openmail.cc>
166 lines
2.9 KiB
Plaintext
166 lines
2.9 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "ar9344.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <60>;
|
|
};
|
|
|
|
wps {
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
|
|
debounce-interval = <60>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ð0 {
|
|
status = "okay";
|
|
|
|
/* default for ar934x, except for 1000M */
|
|
pll-data = <0x06000000 0x00000101 0x00001616>;
|
|
|
|
nvmem-cells = <&macaddr_lan>;
|
|
nvmem-cell-names = "mac-address-ascii";
|
|
|
|
phy-mode = "rgmii";
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
&mdio0 {
|
|
status = "okay";
|
|
|
|
phy0: ethernet-phy@0 {
|
|
reg = <0>;
|
|
qca,ar8327-initvals = <
|
|
/* GPL code drop (bsp.h & athrs17_phy.c) */
|
|
0x10 0xc1000000 /* PWS_REG_VALUE */
|
|
0x04 0x07600000 /* PORT0 PAD Mode */
|
|
0x0c 0x01000000 /* PORT6 PAD Mode */
|
|
0x7c 0x0000007e /* PORT0_STATUS */
|
|
0x94 0x0000007e /* PORT6_STATUS */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
|
|
ath9k: wifi@0,0 {
|
|
compatible = "pci168c,0030";
|
|
reg = <0x0000 0 0 0 0>;
|
|
/* "mac-address-ascii" currently does not work for
|
|
ath9k pci devices. these below are retained for future
|
|
improvements. */
|
|
/* nvmem-cells = <&macaddr_wan>, <&cal_art_5000>;
|
|
nvmem-cell-names = "mac-address-ascii", "calibration";
|
|
mac-address-increment = <1>; */
|
|
qca,no-eeprom; /* remove this when "mac-address-ascii" works */
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&ref {
|
|
clock-frequency = <40000000>;
|
|
};
|
|
|
|
&spi {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <25000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "uboot";
|
|
reg = <0x000000 0x010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@10000 {
|
|
label = "nvram";
|
|
reg = <0x010000 0x010000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@20000 {
|
|
label = "firmware";
|
|
reg = <0x020000 0xF90000>;
|
|
compatible = "denx,uimage";
|
|
};
|
|
|
|
partition@fb0000 {
|
|
label = "lang";
|
|
reg = <0xfb0000 0x030000>;
|
|
read-only;
|
|
};
|
|
|
|
mac: partition@fe0000 {
|
|
label = "mac";
|
|
reg = <0xfe0000 0x010000>;
|
|
read-only;
|
|
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
macaddr_lan: macaddr@4 {
|
|
reg = <0x4 0x11>;
|
|
};
|
|
|
|
macaddr_wan: macaddr@18 {
|
|
reg = <0x18 0x11>;
|
|
};
|
|
};
|
|
|
|
art: partition@ff0000 {
|
|
label = "art";
|
|
reg = <0xff0000 0x010000>;
|
|
read-only;
|
|
|
|
compatible = "nvmem-cells";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cal_art_1000: cal@1000 {
|
|
reg = <0x1000 0x440>;
|
|
};
|
|
|
|
cal_art_5000: cal@5000 {
|
|
reg = <0x5000 0x440>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&usb {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&wmac {
|
|
status = "okay";
|
|
nvmem-cells = <&macaddr_lan>, <&cal_art_1000>;
|
|
nvmem-cell-names = "mac-address-ascii", "calibration";
|
|
};
|