mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
9a1d7ff187
Refreshed all patches. Remove upstreamed: - 950-0434-mmc-bcm2835-Recover-from-MMC_SEND_EXT_CSD.patch Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
83 lines
1.8 KiB
Diff
83 lines
1.8 KiB
Diff
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
|
|
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
|
|
@@ -87,6 +87,12 @@
|
|
};
|
|
};
|
|
|
|
+ rtl8366rb {
|
|
+ compatible = "realtek,rtl8366rb";
|
|
+ gpio-sda = <&gpio0 22 GPIO_ACTIVE_HIGH>;
|
|
+ gpio-sck = <&gpio0 21 GPIO_ACTIVE_HIGH>;
|
|
+ };
|
|
+
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
led-wps {
|
|
@@ -245,6 +251,47 @@
|
|
groups = "gpio1bgrp";
|
|
};
|
|
};
|
|
+ pinctrl-gmii {
|
|
+ mux {
|
|
+ function = "gmii";
|
|
+ groups = "gmii_gmac0_grp";
|
|
+ };
|
|
+ conf0 {
|
|
+ pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
|
|
+ skew-delay = <0>;
|
|
+ };
|
|
+ conf1 {
|
|
+ pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
|
|
+ skew-delay = <15>;
|
|
+ };
|
|
+ conf2 {
|
|
+ pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
|
|
+ skew-delay = <7>;
|
|
+ };
|
|
+ conf3 {
|
|
+ pins = "U8 GMAC0 TXC";
|
|
+ skew-delay = <11>;
|
|
+ };
|
|
+ conf4 {
|
|
+ pins = "V11 GMAC1 TXC";
|
|
+ skew-delay = <10>;
|
|
+ };
|
|
+ conf5 {
|
|
+ pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
|
|
+ "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
|
|
+ "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
|
|
+ "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
|
|
+ "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
|
|
+ "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
|
|
+ "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
|
|
+ "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
|
|
+ skew-delay = <7>;
|
|
+ };
|
|
+ conf6 {
|
|
+ groups = "gmii_gmac0_grp";
|
|
+ drive-strength = <16>;
|
|
+ };
|
|
+ };
|
|
};
|
|
};
|
|
|
|
@@ -286,6 +333,18 @@
|
|
<0x6000 0 0 4 &pci_intc 2>;
|
|
};
|
|
|
|
+ ethernet@60000000 {
|
|
+ status = "okay";
|
|
+
|
|
+ ethernet-port@0 {
|
|
+ phy-mode = "rgmii";
|
|
+ // phy-handle = <&phy0>;
|
|
+ };
|
|
+ ethernet-port@1 {
|
|
+ /* Not used in this platform */
|
|
+ };
|
|
+ };
|
|
+
|
|
ata@63000000 {
|
|
status = "okay";
|
|
};
|