Roger Pueyo Centelles 701d25b551 ipq40xx: add support for MikroTik SXTsq 5 ac ... This commit adds support for the MikroTik SXTsq 5 ac (RBSXTsqG-5acD), an outdoor 802.11ac wireless CPE with one 10/100/1000 Mbps Ethernet port. Specifications: - SoC: Qualcomm Atheros IPQ4018 - RAM: 256 MB - Storage: 16 MB NOR - Wireless: IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 16 dBi antennae - Ethernet: IPQ4018 (SoC) 1x 10/100/1000 port, 10-28 Vdc PoE in - 1x Ethernet LED (green) - 7x user-controllable LEDs · 1x power (blue) · 1x user (green) · 5x rssi (green) Note: Serial UART is probably available on the board, but it has not been tested. Flashing: Boot via TFTP the initramfs image. Then, upload a sysupgrade image via SSH and flash it normally. More info at the "Common procedures for MikroTik products" page https://openwrt.org/toh/mikrotik/common. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> (cherry picked from commit d1f1e5269e) [Compile and Run Tested] Signed-off-by: Nick Hainke <vincent@systemli.org>		2021-05-03 14:57:29 +02:00
..
01_leds	ipq40xx: add support for MikroTik SXTsq 5 ac	2021-05-03 14:57:29 +02:00
02_network	ipq40xx: add support for MikroTik SXTsq 5 ac	2021-05-03 14:57:29 +02:00
03_gpio_switches	ipq40xx: add support for Cell C RTL30VW	2020-04-10 15:22:26 +02:00