David Bauer d7fd690b8c ath79: force SGMII SerDes mode to MAC operation ... The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default. This only allows for 1000 Mbit/s links, however when used with an SGMII PHY in 100 Mbit/s link mode, the link remains dead. This strictly has nothing to do with the SerDes calibration, however it is done at the same point in the QCA reference U-Boot which is the blueprint for everything happening here. As the current state is more or less a hack, this should be fine. This fixes the issues outlined above on a TP-Link EAP-225 Outdoor. Reported-by: Tom Herbers <freifunk@tomherbers.de> Tested-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit fbbad9a9a6)		2021-05-03 01:39:10 +02:00
..
base-files/etc/hotplug.d/ieee80211	ath79: add WiFi migration for AR913x	2020-09-28 16:23:03 +02:00
dts	ath79: fix USB power on TP-Link TL-WR810N v1	2021-05-02 14:32:52 +02:00
files	ath79: force SGMII SerDes mode to MAC operation	2021-05-03 01:39:10 +02:00
generic	ath79: fix label_mac for NEC Aterm WG1200CR	2021-04-02 16:04:47 +02:00
image	ath79: mikrotik: enable SFP on RB922UAGS-5HPaCD	2021-04-30 10:26:34 +02:00
mikrotik	ath79: mikrotik: swap RB922UAGS-5HPaCD eth0/1 MACs	2021-04-30 10:26:34 +02:00
nand	ath79: remove generic profiles	2021-01-27 21:31:20 +01:00
patches-5.4	ath79: force SGMII SerDes mode to MAC operation	2021-05-03 01:39:10 +02:00
tiny	ath79: make all eth ports LAN for Engenius APs	2021-02-08 16:34:18 +01:00
config-5.4	ath79: enable elf mtd splitter	2020-09-09 20:41:50 +03:00
Makefile	ath79: move the squashfs feature to the parent target	2020-11-23 13:20:53 +01:00
modules.mk	ath79: add new OF only target for QCA MIPS silicon	2018-05-07 08:06:51 +02:00