openwrt/target/linux/ramips/dts/mt7621_openfi_5pro.dts
Sven Huang 5560791bbd ramips: add support for OpenFi 5Pro Travel Router
OpenFi 5Pro is a DualBand Travel Router, based on MT7621A.

Specification:
- Type             : Travel Wi-Fi Router(built-in Type-C Power Cable)
- Size             : 63 x 93 x 24mm
- Power            : Internal Type-C Cable PD/DC 5V@2A
- SoC              : MediaTek MT7621A
- RAM              : DDR3 512 MB
- Flash            : SPI-NOR 64MB (W25Q512)
- WLAN             : 2.4/5GHz 2T2R (MediaTek MT7603e/MT7613)
- Ethernet         : 2x 10/100/1000Mbps
- USB              : 1 x USB 2.0
- SDHCI            : 1 x TF Slot (Max 512GB)
- LEDs             : 3 x LEDs  (GPIO#16 gpio#17 gpio#14)
- Button           : 1 x Reset (GPIO#18),  1 x WPS (GPIO#13)
- UART             : 1 x UART for Debug, 115200 8N1 (Pinout: GND TX RX 3.3V)
- UART 2           : 1xUART2  (Pinout: GND TX2 RX2 3.3V )

How to upgrade image in uboot

1. press reset button when boot for 5sec.
2. access 192.168.21.1 in web ui.
3. select image and upload

Signed-off-by: Sven Huang <1036456939@qq.com>
2024-06-17 00:01:51 +02:00

189 lines
3.3 KiB
Plaintext
Executable File

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>
/ {
compatible = "openfi,5pro", "mediatek,mt7621-soc";
model = "OpenFi 5Pro";
aliases {
led-boot = &led_system_blue;
led-failsafe = &led_system_blue;
led-running = &led_system_blue;
led-upgrade = &led_system_blue;
label-mac-device = &gmac0;
};
chosen {
bootargs = "console=ttyS0,115200";
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
led_system_blue: led-0 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led-1 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WAN_ONLINE;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
led-2 {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_WLAN;
linux,default-trigger = "phy0tpt";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
broken-flash-reset;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
eeprom_factory_0: eeprom@0 {
reg = <0x0 0x400>;
};
eeprom_factory_8000: eeprom@8000 {
reg = <0x8000 0x4da8>;
};
macaddr_factory_e000: macaddr@e000 {
reg = <0xe000 0x6>;
};
macaddr_factory_e006: macaddr@e006 {
reg = <0xe006 0x6>;
};
};
};
partition@50000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x50000 0x3fb0000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <2400000 2500000>;
nvmem-cells = <&eeprom_factory_0>;
nvmem-cell-names = "eeprom";
};
};
&pcie1 {
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
ieee80211-freq-limit = <5000000 6000000>;
nvmem-cells = <&eeprom_factory_8000>;
nvmem-cell-names = "eeprom";
};
};
&gmac0 {
nvmem-cells = <&macaddr_factory_e000>;
nvmem-cell-names = "mac-address";
};
&gmac1 {
status = "okay";
label = "wan";
phy-handle = <&ethphy0>;
nvmem-cells = <&macaddr_factory_e006>;
nvmem-cell-names = "mac-address";
};
&ethphy0 {
/delete-property/ interrupts;
};
&switch0 {
ports {
port@1 {
status = "okay";
label = "lan";
};
};
};
&sdhci {
status = "okay";
};
&state_default {
gpio {
groups = "jtag", "wdt";
function = "gpio";
};
};