mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
c27279dc26
Hardware: SoC: MediaTek MT7629 Cortex-A7 (ARMv7 1.25GHz, Dual-Core) RAM: DDR3 128MB Flash: Macronix MX35LF1GE4AB (SPI-NAND 128MB) WiFi: MediaTek MT7761N (2.4GHz) / MediaTek MT7762N (5GHz) - no driver Ethernet: SoC (WAN) / MediaTek MT7531 (LAN x4) UART: [GND, RX, TX, 3.3V] (115200) Installation: - Flash recovery image with TFTP recovery Revert to stock firmware: - Flash stock firmware with TFTP recovery TFTP Recovery method: 1. Unplug the router 2. Hold the reset button and plug in 3. Release when the power LED stops flashing and go off 4. Set your computer IP address manually to 192.168.0.x / 255.255.255.0 5. Flash image with TFTP client to 192.168.0.1 Signed-off-by: Yoonji Park <koreapyj@dcmys.kr>
18 lines
306 B
Bash
Executable File
18 lines
306 B
Bash
Executable File
#!/bin/sh /etc/rc.common
|
|
# SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
START=99
|
|
|
|
boot() {
|
|
case $(board_name) in
|
|
iptime,a6004mx)
|
|
if [ `fw_printenv boot_sector` = "boot_sector=B" ]; then
|
|
echo "bootcount: boot_sector must be A. Rebooting..."
|
|
fw_setenv boot_sector A
|
|
reboot
|
|
exit 1
|
|
fi
|
|
;;
|
|
esac
|
|
}
|