mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
2cc9ee8000
Specification:
- QCA9533 (650 MHz), 64 or 128MB RAM, 16MB SPI NOR
- 2x 10/100 Mbps Ethernet, with 802.3at PoE support (WAN)
- 2T2R 802.11b/g/n 2.4GHz
Flash instructions:
If your device comes with generic QSDK based firmware, you can login
over telnet (login: root, empty password, default IP: 192.168.188.253),
issue first (important!) 'fw_setenv' command and then perform regular
upgrade, using 'sysupgrade -n -F ...' (you can use 'wget' to download
image to the device, SSH server is not available):
fw_setenv bootcmd "bootm 0x9f050000 || bootm 0x9fe80000"
sysupgrade -n -F openwrt-...-yuncore_...-squashfs-sysupgrade.bin
In case your device runs firmware with YunCore custom GUI, you can use
U-Boot recovery mode:
1. Set a static IP 192.168.0.141/24 on PC and start TFTP server with
'tftp' image renamed to 'upgrade.bin'
2. Power the device with reset button pressed and release it after 5-7
seconds, recovery mode should start downloading image from server
(unfortunately, there is no visible indication that recovery got
enabled - in case of problems check TFTP server logs)
Signed-off-by: Clemens Hopfer <openwrt@wireloss.net>
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
(cherry-picked from commit
|
||
---|---|---|
.. | ||
arm-trusted-firmware-bcm63xx | ||
arm-trusted-firmware-mediatek | ||
arm-trusted-firmware-mvebu | ||
arm-trusted-firmware-rockchip | ||
arm-trusted-firmware-sunxi | ||
arm-trusted-firmware-tools | ||
at91bootstrap | ||
fconfig | ||
grub2 | ||
imx-bootlets | ||
kexec-tools | ||
kobs-ng | ||
mt7623n-preloader | ||
tfa-layerscape | ||
uboot-at91 | ||
uboot-bcm4908 | ||
uboot-envtools | ||
uboot-fritz4040 | ||
uboot-imx6 | ||
uboot-kirkwood | ||
uboot-lantiq | ||
uboot-layerscape | ||
uboot-mediatek | ||
uboot-mvebu | ||
uboot-mxs | ||
uboot-omap | ||
uboot-oxnas | ||
uboot-ramips | ||
uboot-rockchip | ||
uboot-sunxi | ||
uboot-tegra | ||
uboot-zynq |