mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-03 12:34:19 +00:00
626344c992
Hardware specification:
SoC: MediaTek MT7981B 2x A53
Flash: Winbond 128MB
RAM: DDR3 256MB
Ethernet: 4x 10/100/1000 Mbps
Switch: MediaTek MT7531AE
WiFi: MediaTek MT7976C
Button: Reset
Power: DC 12V 1A
Flash instructions:
1. Connect to your PC via the Gigabit port of the router,
set a static ip on the ethernet interface of your PC.
(ip 192.168.1.254, gateway 192.168.1.1)
2. Attach UART, pause at u-boot menu.
3. Select "Upgrade ATF BL2", then use preloader.bin
4. Select "Upgrade ATF FIP", then use bl31-uboot.fip
5. Download the initramfs image, and type "reset",
waiting for tftp recovery to complete.
6. After openwrt boots up, perform sysupgrade.
Note:
1. Since NMBM is disabled, we must back up all partitions.
2. Although we can upgrade new firmware in the stock firmware,
we need the special fit image signature of MediaTek and
dual boot (hack kernel) to make u-boot boot it. So just
abandon these hacks and flash it via the serial port.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
784 lines
29 KiB
Makefile
784 lines
29 KiB
Makefile
DTS_DIR := $(DTS_DIR)/mediatek
|
|
|
|
define Image/Prepare
|
|
# For UBI we want only one extra block
|
|
rm -f $(KDIR)/ubi_mark
|
|
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
|
|
endef
|
|
|
|
define Build/mt7981-bl2
|
|
cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
|
|
endef
|
|
|
|
define Build/mt7981-bl31-uboot
|
|
cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
|
|
endef
|
|
|
|
define Build/mt7986-bl2
|
|
cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
|
|
endef
|
|
|
|
define Build/mt7986-bl31-uboot
|
|
cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
|
|
endef
|
|
|
|
define Build/mt7988-bl2
|
|
cat $(STAGING_DIR_IMAGE)/mt7988-$1-bl2.img >> $@
|
|
endef
|
|
|
|
define Build/mt7988-bl31-uboot
|
|
cat $(STAGING_DIR_IMAGE)/mt7988_$1-u-boot.fip >> $@
|
|
endef
|
|
|
|
define Build/mt798x-gpt
|
|
cp $@ $@.tmp 2>/dev/null || true
|
|
ptgen -g -o $@.tmp -a 1 -l 1024 \
|
|
$(if $(findstring sdmmc,$1), \
|
|
-H \
|
|
-t 0x83 -N bl2 -r -p 4079k@17k \
|
|
) \
|
|
-t 0x83 -N ubootenv -r -p 512k@4M \
|
|
-t 0x83 -N factory -r -p 2M@4608k \
|
|
-t 0xef -N fip -r -p 4M@6656k \
|
|
-N recovery -r -p 32M@12M \
|
|
$(if $(findstring sdmmc,$1), \
|
|
-N install -r -p 20M@44M \
|
|
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
|
|
) \
|
|
$(if $(findstring emmc,$1), \
|
|
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
|
|
)
|
|
cat $@.tmp >> $@
|
|
rm $@.tmp
|
|
endef
|
|
|
|
metadata_gl_json = \
|
|
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
|
|
"metadata_version": "1.1", \
|
|
"compat_version": "$(call json_quote,$(compat_version))", \
|
|
$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
|
|
$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
|
|
[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
|
|
"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
|
|
$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
|
|
"version": { \
|
|
"release": "$(call json_quote,$(VERSION_NUMBER))", \
|
|
"date": "$(shell TZ='Asia/Chongqing' date '+%Y%m%d%H%M%S')", \
|
|
"dist": "$(call json_quote,$(VERSION_DIST))", \
|
|
"version": "$(call json_quote,$(VERSION_NUMBER))", \
|
|
"revision": "$(call json_quote,$(REVISION))", \
|
|
"target": "$(call json_quote,$(TARGETID))", \
|
|
"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
|
|
} \
|
|
}'
|
|
|
|
define Build/append-gl-metadata
|
|
$(if $(SUPPORTED_DEVICES),-echo $(call metadata_gl_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
|
|
sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
|
|
[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
|
|
cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
|
|
usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
|
|
ucert -A -c "$@.ucert" -x "$@.sig" ;\
|
|
fwtool -S "$@.ucert" "$@" ;\
|
|
}
|
|
endef
|
|
|
|
define Build/zyxel-nwa-fit-filogic
|
|
$(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
|
|
$@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
|
|
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Build/cetron-header
|
|
$(eval magic=$(word 1,$(1)))
|
|
$(eval model=$(word 2,$(1)))
|
|
( \
|
|
dd if=/dev/zero bs=856 count=1 2>/dev/null; \
|
|
printf "$(model)," | dd bs=128 count=1 conv=sync 2>/dev/null; \
|
|
md5sum $@ | cut -f1 -d" " | dd bs=32 count=1 2>/dev/null; \
|
|
printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
|
|
cat $@; \
|
|
) > $@.tmp
|
|
fw_crc=$$(gzip -c $@.tmp | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n'); \
|
|
printf "$$(echo $$fw_crc | sed 's/../\\x&/g')" | cat - $@.tmp > $@
|
|
rm $@.tmp
|
|
endef
|
|
|
|
define Device/asus_tuf-ax4200
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := TUF-AX4200
|
|
DEVICE_DTS := mt7986a-asus-tuf-ax4200
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += asus_tuf-ax4200
|
|
|
|
define Device/asus_tuf-ax6000
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := TUF-AX6000
|
|
DEVICE_DTS := mt7986a-asus-tuf-ax6000
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += asus_tuf-ax6000
|
|
|
|
define Device/acer_predator-w6
|
|
DEVICE_VENDOR := Acer
|
|
DEVICE_MODEL := Predator W6
|
|
DEVICE_DTS := mt7986a-acer-predator-w6
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += acer_predator-w6
|
|
|
|
define Device/bananapi_bpi-r3
|
|
DEVICE_VENDOR := Bananapi
|
|
DEVICE_MODEL := BPi-R3
|
|
DEVICE_DTS := mt7986a-bananapi-bpi-r3
|
|
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
|
|
DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7986-firmware kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
ARTIFACTS := \
|
|
emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
nor-preloader.bin nor-bl31-uboot.fip \
|
|
sdcard.img.gz \
|
|
snand-preloader.bin snand-bl31-uboot.fip
|
|
ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-emmc
|
|
ARTIFACT/nor-preloader.bin := mt7986-bl2 nor-ddr4
|
|
ARTIFACT/nor-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-nor
|
|
ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ddr4
|
|
ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
|
|
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
|
|
pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
|
|
pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
|
|
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
|
|
) \
|
|
pad-to 44M | mt7986-bl2 spim-nand-ddr4 |\
|
|
pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
|
|
pad-to 49M | mt7986-bl2 nor-ddr4 |\
|
|
pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
|
|
pad-to 51M | mt7986-bl2 emmc-ddr4 |\
|
|
pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
|
|
pad-to 56M | mt798x-gpt emmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
|
|
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
|
|
) \
|
|
gzip
|
|
ifeq ($(DUMP),)
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
endif
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Device tree overlay mechanism needs bootloader update
|
|
endef
|
|
TARGET_DEVICES += bananapi_bpi-r3
|
|
|
|
define Device/cetron_ct3003
|
|
DEVICE_VENDOR := Cetron
|
|
DEVICE_MODEL := CT3003
|
|
DEVICE_DTS := mt7981b-cetron-ct3003
|
|
DEVICE_DTS_DIR := ../dts
|
|
SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | cetron-header rd30 CT3003
|
|
endef
|
|
TARGET_DEVICES += cetron_ct3003
|
|
|
|
define Device/cmcc_rax3000m
|
|
DEVICE_VENDOR := CMCC
|
|
DEVICE_MODEL := RAX3000M
|
|
DEVICE_DTS := mt7981b-cmcc-rax3000m
|
|
DEVICE_DTS_OVERLAY := mt7981b-cmcc-rax3000m-emmc mt7981b-cmcc-rax3000m-nand
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-usb3 \
|
|
e2fsprogs f2fsck mkf2fs
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | \
|
|
pad-rootfs | append-metadata
|
|
ARTIFACTS := \
|
|
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
nand-preloader.bin nand-bl31-uboot.fip
|
|
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
|
|
ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr4
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-emmc
|
|
ARTIFACT/nand-preloader.bin := mt7981-bl2 spim-nand-ddr4
|
|
ARTIFACT/nand-bl31-uboot.fip := mt7981-bl31-uboot cmcc_rax3000m-nand
|
|
endef
|
|
TARGET_DEVICES += cmcc_rax3000m
|
|
|
|
define Device/cudy_wr3000-v1
|
|
DEVICE_VENDOR := Cudy
|
|
DEVICE_MODEL := WR3000
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_DTS := mt7981b-cudy-wr3000-v1
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE_SIZE := 15424k
|
|
SUPPORTED_DEVICES += R31
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware
|
|
endef
|
|
TARGET_DEVICES += cudy_wr3000-v1
|
|
|
|
define Device/glinet_gl-mt3000
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT3000
|
|
DEVICE_DTS := mt7981b-glinet-gl-mt3000
|
|
DEVICE_DTS_DIR := ../dts
|
|
SUPPORTED_DEVICES += glinet,mt3000-snand
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 246272k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt3000
|
|
|
|
define Device/glinet_gl-mt6000
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT6000
|
|
DEVICE_DTS := mt7986a-glinet-gl-mt6000
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot glinet_gl-mt6000
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt6000
|
|
|
|
define Device/h3c_magic-nx30-pro
|
|
DEVICE_VENDOR := H3C
|
|
DEVICE_MODEL := Magic NX30 Pro
|
|
DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGE_SIZE := 65536k
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
|
|
endef
|
|
TARGET_DEVICES += h3c_magic-nx30-pro
|
|
|
|
define Device/jcg_q30-pro
|
|
DEVICE_VENDOR := JCG
|
|
DEVICE_MODEL := Q30 PRO
|
|
DEVICE_DTS := mt7981b-jcg-q30-pro
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot jcg_q30-pro
|
|
endef
|
|
TARGET_DEVICES += jcg_q30-pro
|
|
|
|
define Device/netgear_wax220
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := WAX220
|
|
DEVICE_DTS := mt7986b-netgear-wax220
|
|
DEVICE_DTS_DIR := ../dts
|
|
NETGEAR_ENC_MODEL := WAX220
|
|
NETGEAR_ENC_REGION := US
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
IMAGE_SIZE := 32768k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGES += factory.img
|
|
# Padding to 10M seems to be required by OEM web interface
|
|
IMAGE/factory.img := sysupgrade-tar | \
|
|
pad-to 10M | check-size | netgear-encrypted-factory
|
|
endef
|
|
TARGET_DEVICES += netgear_wax220
|
|
|
|
define Device/mediatek_mt7981-rfb
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7981 rfb
|
|
DEVICE_DTS := mt7981-rfb
|
|
DEVICE_DTS_OVERLAY:= \
|
|
mt7981-rfb-spim-nand \
|
|
mt7981-rfb-mxl-2p5g-phy-eth1 \
|
|
mt7981-rfb-mxl-2p5g-phy-swp5
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs mt7981-wo-firmware
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
KERNEL_INITRAMFS_SUFFIX := .itb
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
|
|
ARTIFACTS := \
|
|
emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
nor-preloader.bin nor-bl31-uboot.fip \
|
|
sdcard.img.gz \
|
|
snfi-nand-preloader.bin snfi-nand-bl31-uboot.fip \
|
|
spim-nand-preloader.bin spim-nand-bl31-uboot.fip
|
|
ARTIFACT/emmc-preloader.bin := mt7981-bl2 emmc-ddr3
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
|
|
ARTIFACT/nor-preloader.bin := mt7981-bl2 nor-ddr3
|
|
ARTIFACT/nor-bl31-uboot.fip := mt7981-bl31-uboot rfb-emmc
|
|
ARTIFACT/snfi-nand-preloader.bin := mt7981-bl2 snand-ddr3
|
|
ARTIFACT/snfi-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-snfi
|
|
ARTIFACT/spim-nand-preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/spim-nand-bl31-uboot.fip := mt7981-bl31-uboot rfb-spim-nand
|
|
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
|
|
pad-to 17k | mt7981-bl2 sdmmc-ddr3 |\
|
|
pad-to 6656k | mt7981-bl31-uboot rfb-sd |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
|
|
pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
|
|
) \
|
|
pad-to 44M | mt7981-bl2 spim-nand-ddr3 |\
|
|
pad-to 45M | mt7981-bl31-uboot rfb-spim-nand |\
|
|
pad-to 49M | mt7981-bl2 nor-ddr3 |\
|
|
pad-to 50M | mt7981-bl31-uboot rfb-nor |\
|
|
pad-to 51M | mt7981-bl2 snand-ddr3 |\
|
|
pad-to 53M | mt7981-bl31-uboot rfb-snfi |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
|
|
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
|
|
) \
|
|
gzip
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7981-rfb
|
|
|
|
define Device/mediatek_mt7986a-rfb-nand
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7986 rfba AP (NAND)
|
|
DEVICE_DTS := mt7986a-rfb-spim-nand
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
KERNEL = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7986a-rfb-nand
|
|
|
|
define Device/mediatek_mt7986b-rfb
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MTK7986 rfbb AP
|
|
DEVICE_DTS := mt7986b-rfb
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
SUPPORTED_DEVICES := mediatek,mt7986b-rfb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7986b-rfb
|
|
|
|
define Device/mediatek_mt7988a-rfb
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7988A rfb
|
|
DEVICE_DTS := mt7988a-rfb
|
|
DEVICE_DTS_OVERLAY:= \
|
|
mt7988a-rfb-emmc \
|
|
mt7988a-rfb-sd \
|
|
mt7988a-rfb-snfi-nand \
|
|
mt7988a-rfb-spim-nand \
|
|
mt7988a-rfb-spim-nor \
|
|
mt7988a-rfb-eth1-aqr \
|
|
mt7988a-rfb-eth1-i2p5g-phy \
|
|
mt7988a-rfb-eth1-mxl \
|
|
mt7988a-rfb-eth1-sfp \
|
|
mt7988a-rfb-eth2-aqr \
|
|
mt7988a-rfb-eth2-mxl \
|
|
mt7988a-rfb-eth2-sfp
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_DTS_LOADADDR := 0x45f00000
|
|
DEVICE_PACKAGES := kmod-sfp
|
|
KERNEL_LOADADDR := 0x46000000
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
KERNEL_INITRAMFS_SUFFIX := .itb
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
IMAGES := sysupgrade.itb
|
|
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
|
|
ARTIFACTS := \
|
|
emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
nor-preloader.bin nor-bl31-uboot.fip \
|
|
sdcard.img.gz \
|
|
snand-preloader.bin snand-bl31-uboot.fip
|
|
ARTIFACT/emmc-gpt.bin := mt798x-gpt emmc
|
|
ARTIFACT/emmc-preloader.bin := mt7988-bl2 emmc-comb
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7988-bl31-uboot rfb-emmc
|
|
ARTIFACT/nor-preloader.bin := mt7988-bl2 nor-comb
|
|
ARTIFACT/nor-bl31-uboot.fip := mt7988-bl31-uboot rfb-nor
|
|
ARTIFACT/snand-preloader.bin := mt7988-bl2 spim-nand-comb
|
|
ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot rfb-snand
|
|
ARTIFACT/sdcard.img.gz := mt798x-gpt sdmmc |\
|
|
pad-to 17k | mt7988-bl2 sdmmc-comb |\
|
|
pad-to 6656k | mt7988-bl31-uboot rfb-sd |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
|
|
pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
|
|
) \
|
|
pad-to 44M | mt7988-bl2 spim-nand-comb |\
|
|
pad-to 45M | mt7988-bl31-uboot rfb-snand |\
|
|
pad-to 51M | mt7988-bl2 nor-comb |\
|
|
pad-to 51M | mt7988-bl31-uboot rfb-nor |\
|
|
pad-to 55M | mt7988-bl2 emmc-comb |\
|
|
pad-to 56M | mt7988-bl31-uboot rfb-emmc |\
|
|
pad-to 62M | mt798x-gpt emmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
|
|
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
|
|
) \
|
|
gzip
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7988a-rfb
|
|
|
|
define Device/mercusys_mr90x-v1
|
|
DEVICE_VENDOR := MERCUSYS
|
|
DEVICE_MODEL := MR90X v1
|
|
DEVICE_DTS := mt7986b-mercusys-mr90x-v1
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 51200k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += mercusys_mr90x-v1
|
|
|
|
define Device/qihoo_360t7
|
|
DEVICE_VENDOR := Qihoo
|
|
DEVICE_MODEL := 360T7
|
|
DEVICE_DTS := mt7981b-qihoo-360t7
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
|
|
endef
|
|
TARGET_DEVICES += qihoo_360t7
|
|
|
|
define Device/tplink_tl-xdr-common
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
|
|
endef
|
|
|
|
define Device/tplink_tl-xdr4288
|
|
DEVICE_MODEL := TL-XDR4288
|
|
DEVICE_DTS := mt7986a-tplink-tl-xdr4288
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
|
|
$(call Device/tplink_tl-xdr-common)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xdr4288
|
|
|
|
define Device/tplink_tl-xdr6086
|
|
DEVICE_MODEL := TL-XDR6086
|
|
DEVICE_DTS := mt7986a-tplink-tl-xdr6086
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
|
|
$(call Device/tplink_tl-xdr-common)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xdr6086
|
|
|
|
define Device/tplink_tl-xdr6088
|
|
DEVICE_MODEL := TL-XDR6088
|
|
DEVICE_DTS := mt7986a-tplink-tl-xdr6088
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
|
|
$(call Device/tplink_tl-xdr-common)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xdr6088
|
|
|
|
define Device/ubnt_unifi-6-plus
|
|
DEVICE_VENDOR := Ubiquiti
|
|
DEVICE_MODEL := UniFi 6 Plus
|
|
DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += ubnt_unifi-6-plus
|
|
|
|
define Device/xiaomi_mi-router-wr30u-112m-nmbm
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-112m-nmbm
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
|
|
endif
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-wr30u-112m-nmbm
|
|
|
|
define Device/xiaomi_mi-router-wr30u-stock
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router WR30U (stock layout)
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
|
|
endif
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
|
|
|
|
define Device/xiaomi_mi-router-wr30u-ubootmod
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS += initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
|
|
|
|
define Device/xiaomi_redmi-router-ax6000-stock
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Redmi Router AX6000 (stock layout)
|
|
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
|
|
endif
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
|
|
|
|
define Device/xiaomi_redmi-router-ax6000-ubootmod
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
|
|
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
IMAGES := sysupgrade.itb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS += initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
|
|
|
|
define Device/zyxel_ex5601-t0-stock
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := EX5601-T0 (stock layout)
|
|
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 256k
|
|
PAGESIZE := 4096
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
KERNEL = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
|
endef
|
|
TARGET_DEVICES += zyxel_ex5601-t0-stock
|
|
|
|
define Device/zyxel_ex5700-telenor
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := EX5700 (Telenor)
|
|
DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7916-firmware kmod-ubootenv-nvram kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_ex5700-telenor
|
|
|
|
define Device/zyxel_nwa50ax-pro
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NWA50AX Pro
|
|
DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
|
|
DEVICE_DTS_LOADADDR := 0x44000000
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 51200k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_nwa50ax-pro
|