mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
99 lines
3.0 KiB
Diff
99 lines
3.0 KiB
Diff
From e141a75b9cc36a09eb8bda90b530d97a9bb1f21e Mon Sep 17 00:00:00 2001
|
|
From: Ahmet Inan <inan@aicodix.de>
|
|
Date: Fri, 1 Sep 2017 15:18:01 +0200
|
|
Subject: [PATCH 164/454] overlays: Add EETI EXC3000 overlay
|
|
|
|
Add support for I2C connected EETI EXC3000 multiple touch controller
|
|
using GPIO 4 (pin 7 on GPIO header) for interrupt.
|
|
|
|
Signed-off-by: Ahmet Inan <inan@aicodix.de>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 12 +++++
|
|
.../arm/boot/dts/overlays/exc3000-overlay.dts | 48 +++++++++++++++++++
|
|
3 files changed, 61 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/exc3000-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -26,6 +26,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
dwc2.dtbo \
|
|
enc28j60.dtbo \
|
|
enc28j60-spi2.dtbo \
|
|
+ exc3000.dtbo \
|
|
fe-pi-audio.dtbo \
|
|
goodix.dtbo \
|
|
googlevoicehat-soundcard.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -468,6 +468,18 @@ Params: int_pin GPIO use
|
|
speed SPI bus speed (default 12000000)
|
|
|
|
|
|
+Name: exc3000
|
|
+Info: Enables I2C connected EETI EXC3000 multiple touch controller using
|
|
+ GPIO 4 (pin 7 on GPIO header) for interrupt.
|
|
+Load: dtoverlay=exc3000,<param>=<val>
|
|
+Params: interrupt GPIO used for interrupt (default 4)
|
|
+ sizex Touchscreen size x (default 4096)
|
|
+ sizey Touchscreen size y (default 4096)
|
|
+ invx Touchscreen inverted x axis
|
|
+ invy Touchscreen inverted y axis
|
|
+ swapxy Touchscreen swapped x y axis
|
|
+
|
|
+
|
|
Name: fe-pi-audio
|
|
Info: Configures the Fe-Pi Audio Sound Card
|
|
Load: dtoverlay=fe-pi-audio
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/exc3000-overlay.dts
|
|
@@ -0,0 +1,48 @@
|
|
+// Device tree overlay for I2C connected EETI EXC3000 multiple touch controller
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2708";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ exc3000_pins: exc3000_pins {
|
|
+ brcm,pins = <4>; // interrupt
|
|
+ brcm,function = <0>; // in
|
|
+ brcm,pull = <2>; // pull-up
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&i2c1>;
|
|
+ __overlay__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ status = "okay";
|
|
+
|
|
+ exc3000: exc3000@2a {
|
|
+ compatible = "eeti,exc3000";
|
|
+ reg = <0x2a>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&exc3000_pins>;
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupts = <4 8>; // active low level-sensitive
|
|
+ touchscreen-size-x = <4096>;
|
|
+ touchscreen-size-y = <4096>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ interrupt = <&exc3000_pins>,"brcm,pins:0",
|
|
+ <&exc3000>,"interrupts:0";
|
|
+ sizex = <&exc3000>,"touchscreen-size-x:0";
|
|
+ sizey = <&exc3000>,"touchscreen-size-y:0";
|
|
+ invx = <&exc3000>,"touchscreen-inverted-x?";
|
|
+ invy = <&exc3000>,"touchscreen-inverted-y?";
|
|
+ swapxy = <&exc3000>,"touchscreen-swapped-x-y?";
|
|
+ };
|
|
+};
|