Felix Fietkau 6dfea16ab9 ar8216: display flow control info in swconfig get_link in case of autonegatiation too ... The swconfig get_link attribute (at least) on AR8327/AR8337 doesn't consider the autonegotiated flow control. AR8327/AR8337 provide the info about autonegotiated rx/tx flow control in bits 10 and 11 of the port status register. Use these values to display info about autonegotiated rx/tx flow control as part of the get_link attribute. Successfully tested on TL-WDR4900 (AR8327 rev.4) and TL-WDR4300 (AR8327 rev.2). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44023		2015-01-18 00:54:06 +00:00
..
b53	b53: hardcode reset GPIO for Linksys WRT300N 1.1	2014-07-06 11:40:51 +00:00
adm6996.c	adm6996: the GPIO interface for the adm6996l does not support switch statistics.	2014-07-05 12:13:56 +00:00
adm6996.h	linux/generic: add MIB counters and port status to ADM6996 switch	2014-04-22 08:08:02 +00:00
ar8216.c	ar8216: add 802.3az EEE info to swconfig get_link attribute	2015-01-18 00:53:59 +00:00
ar8216.h	ar8216: add 802.3az EEE info to swconfig get_link attribute	2015-01-18 00:53:59 +00:00
ar8327.c	ar8216: display flow control info in swconfig get_link in case of autonegatiation too	2015-01-18 00:54:06 +00:00
ar8327.h	ar8216: display flow control info in swconfig get_link in case of autonegatiation too	2015-01-18 00:54:06 +00:00
ip17xx.c	unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.	2010-10-12 20:49:35 +00:00
mvsw61xx.c	mvsw61xx: track and set per-VLAN port state in STU	2015-01-11 17:20:16 +00:00
mvsw61xx.h	mvsw61xx: track and set per-VLAN port state in STU	2015-01-11 17:20:16 +00:00
mvswitch.c	generic: mvswitch: add detach callback	2013-02-07 15:18:34 +00:00
mvswitch.h	rename target/linux/generic-2.6 to generic	2010-06-26 20:42:58 +00:00
psb6970.c	unify extended vlan id swconfig attributes. AR8216 and PSB6970 used "pvid", IP17xx used "tag" and RTL8306 called it "vid". Change all to "vid" and annotate the description with the valid ID range.	2010-10-12 20:49:35 +00:00
rtl8306.c	revert: kernel: rtl8306: fix max pvid & remove port isolation	2014-03-30 10:04:55 +00:00
rtl8366_smi.c	strict_strtoul is obsolete, use kstrtoul instead	2013-07-27 09:23:18 +00:00
rtl8366_smi.h	linux: generic: rtl836*: fix compilation with !CONFIG_OF	2012-12-15 13:32:02 +00:00
rtl8366rb.c	generic: add port mirroring/monitoring capability to rtl8366rb switch	2013-06-04 13:25:52 +00:00
rtl8366s.c	fix rtl8366s OF binding	2013-04-12 18:56:05 +00:00
rtl8367.c	rtl8367: add support for configuring the VLAN FID	2013-08-12 17:25:25 +00:00
rtl8367b.c	generic: rtl8367: add compatible string with vendor prefix	2013-04-06 17:19:31 +00:00
swconfig_leds.c	ar71xx: swconfig: use the local helper to set LED brightness on link down	2014-01-26 16:46:21 +00:00
swconfig.c	ar8216: add 802.3az EEE info to swconfig get_link attribute	2015-01-18 00:53:59 +00:00