Chukun Pan 6df6f03396 mediatek: filogic: add JCG Q30 PRO support ... Hardware specification: SoC: MediaTek MT7981B 2x A53 Flash: Winbond 128MB RAM: DDR3 256MB Ethernet: 4x 10/100/1000 Mbps Switch: MediaTek MT7531AE WiFi: MediaTek MT7976C Button: Reset Power: DC 12V 1A Flash instructions: 1. Connect to your PC via the Gigabit port of the router, set a static ip on the ethernet interface of your PC. (ip 192.168.1.254, gateway 192.168.1.1) 2. Attach UART, pause at u-boot menu. 3. Select "Upgrade ATF BL2", then use preloader.bin 4. Select "Upgrade ATF FIP", then use bl31-uboot.fip 5. Download the initramfs image, and type "reset", waiting for tftp recovery to complete. 6. After openwrt boots up, perform sysupgrade. Note: 1. Since NMBM is disabled, we must back up all partitions. 2. Although we can upgrade new firmware in the stock firmware, we need the special fit image signature of MediaTek and dual boot (hack kernel) to make u-boot boot it. So just abandon these hacks and flash it via the serial port. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> (cherry picked from commit 626344c992)		2023-12-08 07:35:46 +01:00
..
01_leds	mediatek: filogic: add specific layout for WR30U	2023-08-07 16:31:27 +01:00
02_network	mediatek: filogic: add JCG Q30 PRO support	2023-12-08 07:35:46 +01:00
05_compat-version	mediatek: sync MT7986 device trees with upstream	2023-06-09 19:23:03 +01:00