mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
f9b8328d79
Add the ranges property to the PCI bridges where missing. Add the unit address to PCI bridge where missing. Rework the complete rt3883 pci node. Drop the PCI unit nodes from the dtsi. They are not used by any dts file and should be rather in the dts than in the SoC dtsi. Express the PCI-PCI bridge in a clean devicetree syntax. The ralink,pci-slot isn't used by any driver, drop it. Move the pci interrupt controller out of the pci node. It doesn't share the same reg and therefore should be an independent/SoC child node. Move the pci related rt3883 pinctrl setting to the dtsi instead of defining the very same for each rt3883 board. If the device_type property is used for PCI units, the unit is treated as pci bridge which it isn't. Drop it for PCI units. Reference pci-bridges or the pci node defined in the dtsi instead of recreating the whole node hierarchy. It allows to change the referenced node in the dtsi without the need to touch all dts. Fix the PCI(e) wireless unit addresses. All our PCI(e) wireless chips are the first device on the bus. The unit address has to be the bus address instead of the PCI vendor/device id. Signed-off-by: Mathias Kresin <dev@kresin.me>
580 lines
9.9 KiB
Plaintext
580 lines
9.9 KiB
Plaintext
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "ralink,mtk7620a-soc";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "mips,mips24KEc";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,57600";
|
|
};
|
|
|
|
cpuintc: cpuintc {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
};
|
|
|
|
aliases {
|
|
spi0 = &spi0;
|
|
spi1 = &spi1;
|
|
serial0 = &uartlite;
|
|
};
|
|
|
|
palmbus: palmbus@10000000 {
|
|
compatible = "palmbus";
|
|
reg = <0x10000000 0x200000>;
|
|
ranges = <0x0 0x10000000 0x1FFFFF>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
sysc: sysc@0 {
|
|
compatible = "ralink,mt7620a-sysc", "ralink,rt3050-sysc", "syscon";
|
|
reg = <0x0 0x100>;
|
|
};
|
|
|
|
timer: timer@100 {
|
|
compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer";
|
|
reg = <0x100 0x20>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <1>;
|
|
};
|
|
|
|
watchdog: watchdog@120 {
|
|
compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt";
|
|
reg = <0x120 0x10>;
|
|
|
|
resets = <&rstctrl 8>;
|
|
reset-names = "wdt";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <1>;
|
|
};
|
|
|
|
intc: intc@200 {
|
|
compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc";
|
|
reg = <0x200 0x100>;
|
|
|
|
resets = <&rstctrl 19>;
|
|
reset-names = "intc";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <2>;
|
|
};
|
|
|
|
memc: memc@300 {
|
|
compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc";
|
|
reg = <0x300 0x100>;
|
|
|
|
resets = <&rstctrl 20>;
|
|
reset-names = "mc";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <3>;
|
|
};
|
|
|
|
uart: uart@500 {
|
|
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
|
|
reg = <0x500 0x100>;
|
|
|
|
resets = <&rstctrl 12>;
|
|
reset-names = "uart";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <5>;
|
|
|
|
reg-shift = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio@600 {
|
|
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
|
|
reg = <0x600 0x34>;
|
|
|
|
resets = <&rstctrl 13>;
|
|
reset-names = "pio";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <6>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
ralink,gpio-base = <0>;
|
|
ralink,nr-gpio = <24>;
|
|
ralink,register-map = [ 00 04 08 0c
|
|
20 24 28 2c
|
|
30 34 ];
|
|
};
|
|
|
|
gpio1: gpio@638 {
|
|
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
|
|
reg = <0x638 0x24>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <6>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
ralink,gpio-base = <24>;
|
|
ralink,nr-gpio = <16>;
|
|
ralink,register-map = [ 00 04 08 0c
|
|
10 14 18 1c
|
|
20 24 ];
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio2: gpio@660 {
|
|
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
|
|
reg = <0x660 0x24>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <6>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
ralink,gpio-base = <40>;
|
|
ralink,nr-gpio = <32>;
|
|
ralink,register-map = [ 00 04 08 0c
|
|
10 14 18 1c
|
|
20 24 ];
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio3: gpio@688 {
|
|
compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio";
|
|
reg = <0x688 0x24>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <6>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
ralink,gpio-base = <72>;
|
|
ralink,nr-gpio = <1>;
|
|
ralink,register-map = [ 00 04 08 0c
|
|
10 14 18 1c
|
|
20 24 ];
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c: i2c@900 {
|
|
compatible = "ralink,rt2880-i2c";
|
|
reg = <0x900 0x100>;
|
|
|
|
resets = <&rstctrl 16>;
|
|
reset-names = "i2c";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c_pins>;
|
|
};
|
|
|
|
i2s: i2s@a00 {
|
|
compatible = "mediatek,mt7620-i2s";
|
|
reg = <0xa00 0x100>;
|
|
|
|
resets = <&rstctrl 17>;
|
|
reset-names = "i2s";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <10>;
|
|
|
|
txdma-req = <2>;
|
|
rxdma-req = <3>;
|
|
|
|
dmas = <&gdma 4>,
|
|
<&gdma 6>;
|
|
dma-names = "tx", "rx";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@b00 {
|
|
compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
|
|
reg = <0xb00 0x40>;
|
|
|
|
resets = <&rstctrl 18>;
|
|
reset-names = "spi";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_pins>;
|
|
};
|
|
|
|
spi1: spi@b40 {
|
|
compatible = "ralink,rt2880-spi";
|
|
reg = <0xb40 0x60>;
|
|
|
|
resets = <&rstctrl 18>;
|
|
reset-names = "spi";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi_cs1>;
|
|
};
|
|
|
|
uartlite: uartlite@c00 {
|
|
compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
|
|
reg = <0xc00 0x100>;
|
|
|
|
resets = <&rstctrl 19>;
|
|
reset-names = "uartl";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <12>;
|
|
|
|
reg-shift = <2>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uartlite_pins>;
|
|
};
|
|
|
|
systick: systick@d00 {
|
|
compatible = "ralink,mt7620a-systick", "ralink,cevt-systick";
|
|
reg = <0xd00 0x10>;
|
|
|
|
resets = <&rstctrl 28>;
|
|
reset-names = "intc";
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <7>;
|
|
};
|
|
|
|
pcm: pcm@2000 {
|
|
compatible = "ralink,mt7620a-pcm";
|
|
reg = <0x2000 0x800>;
|
|
|
|
resets = <&rstctrl 11>;
|
|
reset-names = "pcm";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <4>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gdma: gdma@2800 {
|
|
compatible = "ralink,mt7620a-gdma", "ralink,rt3883-gdma";
|
|
reg = <0x2800 0x800>;
|
|
|
|
resets = <&rstctrl 14>;
|
|
reset-names = "dma";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <7>;
|
|
|
|
#dma-cells = <1>;
|
|
#dma-channels = <16>;
|
|
#dma-requests = <16>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "ralink,rt2880-pinmux";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&state_default>;
|
|
|
|
state_default: pinctrl0 {
|
|
};
|
|
|
|
pcm_i2s_pins: pcm_i2s {
|
|
pcm_i2s {
|
|
ralink,group = "uartf";
|
|
ralink,function = "pcm i2s";
|
|
};
|
|
};
|
|
|
|
uartf_gpio_pins: uartf_gpio {
|
|
uartf_gpio {
|
|
ralink,group = "uartf";
|
|
ralink,function = "gpio uartf";
|
|
};
|
|
};
|
|
|
|
gpio_i2s_pins: gpio_i2s {
|
|
gpio_i2s {
|
|
ralink,group = "uartf";
|
|
ralink,function = "gpio i2s";
|
|
};
|
|
};
|
|
|
|
spi_pins: spi {
|
|
spi {
|
|
ralink,group = "spi";
|
|
ralink,function = "spi";
|
|
};
|
|
};
|
|
|
|
spi_cs1: spi1 {
|
|
spi1 {
|
|
ralink,group = "spi_cs1";
|
|
ralink,function = "spi_cs1";
|
|
};
|
|
};
|
|
|
|
i2c_pins: i2c {
|
|
i2c {
|
|
ralink,group = "i2c";
|
|
ralink,function = "i2c";
|
|
};
|
|
};
|
|
|
|
uartlite_pins: uartlite {
|
|
uart {
|
|
ralink,group = "uartlite";
|
|
ralink,function = "uartlite";
|
|
};
|
|
};
|
|
|
|
mdio_pins: mdio {
|
|
mdio {
|
|
ralink,group = "mdio";
|
|
ralink,function = "mdio";
|
|
};
|
|
};
|
|
|
|
mdio_refclk_pins: mdio_refclk {
|
|
mdio_refclk {
|
|
ralink,group = "mdio";
|
|
ralink,function = "refclk";
|
|
};
|
|
};
|
|
|
|
ephy_pins: ephy {
|
|
ephy {
|
|
ralink,group = "ephy";
|
|
ralink,function = "ephy";
|
|
};
|
|
};
|
|
|
|
wled_pins: wled {
|
|
wled {
|
|
ralink,group = "wled";
|
|
ralink,function = "wled";
|
|
};
|
|
};
|
|
|
|
rgmii1_pins: rgmii1 {
|
|
rgmii1 {
|
|
ralink,group = "rgmii1";
|
|
ralink,function = "rgmii1";
|
|
};
|
|
};
|
|
|
|
rgmii2_pins: rgmii2 {
|
|
rgmii2 {
|
|
ralink,group = "rgmii2";
|
|
ralink,function = "rgmii2";
|
|
};
|
|
};
|
|
|
|
pcie_pins: pcie {
|
|
pcie {
|
|
ralink,group = "pcie";
|
|
ralink,function = "pcie rst";
|
|
};
|
|
};
|
|
|
|
pa_pins: pa {
|
|
pa {
|
|
ralink,group = "pa";
|
|
ralink,function = "pa";
|
|
};
|
|
};
|
|
};
|
|
|
|
rstctrl: rstctrl {
|
|
compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset";
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
clkctrl: clkctrl {
|
|
compatible = "ralink,rt2880-clock";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
usbphy: usbphy {
|
|
compatible = "mediatek,mt7620-usbphy";
|
|
#phy-cells = <0>;
|
|
|
|
ralink,sysctl = <&sysc>;
|
|
resets = <&rstctrl 22 &rstctrl 25>;
|
|
reset-names = "host", "device";
|
|
|
|
clocks = <&clkctrl 22 &clkctrl 25>;
|
|
clock-names = "host", "device";
|
|
};
|
|
|
|
ethernet: ethernet@10100000 {
|
|
compatible = "mediatek,mt7620-eth";
|
|
reg = <0x10100000 0x10000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <5>;
|
|
|
|
resets = <&rstctrl 21 &rstctrl 23>;
|
|
reset-names = "fe", "esw";
|
|
|
|
mediatek,switch = <&gsw>;
|
|
|
|
port@4 {
|
|
compatible = "mediatek,mt7620a-gsw-port", "mediatek,eth-port";
|
|
reg = <4>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
port@5 {
|
|
compatible = "mediatek,mt7620a-gsw-port", "mediatek,eth-port";
|
|
reg = <5>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gsw: gsw@10110000 {
|
|
compatible = "mediatek,mt7620-gsw";
|
|
reg = <0x10110000 0x8000>;
|
|
|
|
resets = <&rstctrl 23>;
|
|
reset-names = "esw";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <17>;
|
|
};
|
|
|
|
sdhci: sdhci@10130000 {
|
|
compatible = "ralink,mt7620-sdhci";
|
|
reg = <0x10130000 0x4000>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <14>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: ehci@101c0000 {
|
|
compatible = "generic-ehci";
|
|
reg = <0x101c0000 0x1000>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <18>;
|
|
|
|
phys = <&usbphy>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: ohci@101c1000 {
|
|
compatible = "generic-ohci";
|
|
reg = <0x101c1000 0x1000>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <18>;
|
|
|
|
phys = <&usbphy>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie: pcie@10140000 {
|
|
compatible = "mediatek,mt7620-pci";
|
|
reg = <0x10140000 0x100
|
|
0x10142000 0x100>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
resets = <&rstctrl 26>;
|
|
reset-names = "pcie0";
|
|
|
|
clocks = <&clkctrl 26>;
|
|
clock-names = "pcie0";
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <4>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_pins>;
|
|
|
|
device_type = "pci";
|
|
|
|
bus-range = <0 255>;
|
|
ranges = <
|
|
0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */
|
|
0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */
|
|
>;
|
|
|
|
status = "disabled";
|
|
|
|
pcie0: pcie@0,0 {
|
|
reg = <0x0000 0 0 0 0>;
|
|
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
device_type = "pci";
|
|
|
|
ranges;
|
|
};
|
|
};
|
|
|
|
wmac: wmac@10180000 {
|
|
compatible = "ralink,rt7620-wmac", "ralink,rt2880-wmac";
|
|
reg = <0x10180000 0x40000>;
|
|
|
|
interrupt-parent = <&cpuintc>;
|
|
interrupts = <6>;
|
|
|
|
ralink,eeprom = "soc_wmac.eeprom";
|
|
};
|
|
};
|