openwrt/target/linux/ramips/dts/EX3700.dts
Mathias Kresin 53624c1702 ramips: fix dtc warnings
Fix individual boards dtc warnings or obvious mistakes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00

164 lines
2.5 KiB
Plaintext

/* This file is released into the public domain */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "mt7620a.dtsi"
/ {
compatible = "netgear,ex3700", "ralink,mt7620a-soc";
model = "Netgear EX3700/EX3800";
aliases {
led-status = &led_power_green;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
led_power_green: power_g {
label = "ex3700:green:power";
gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
default-state = "on";
};
power_a {
label = "ex3700:amber:power";
gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
default-state = "off";
};
router_g {
label = "ex3700:green:router";
gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
};
router_r {
label = "ex3700:red:router";
gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
};
device_g {
label = "ex3700:green:device";
gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
};
device_r {
label = "ex3700:red:device";
gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
};
wps {
label = "ex3700:green:wps";
gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&gpio0 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "config";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x790000>;
};
partition@7e0000 {
label = "board_data";
reg = <0x7e0000 0x10000>;
read-only;
};
partition@7f0000 {
label = "nvram";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0 >;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};
&pinctrl {
state_default: pinctrl0 {
default {
ralink,group = "i2c", "rgmii2", "spi refclk";
ralink,function = "gpio";
};
};
};