openwrt/target/linux/ramips/dts/DIR-860L-B1.dts
Mathias Kresin 53624c1702 ramips: fix dtc warnings
Fix individual boards dtc warnings or obvious mistakes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00

143 lines
2.2 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "dlink,dir-860l-b1", "mediatek,mt7621-soc";
model = "D-Link DIR-860L B1";
aliases {
led-status = &led_power_green;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "dir-860l-b1:orange:power";
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
};
led_power_green: power2 {
label = "dir-860l-b1:green:power";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
};
net {
label = "dir-860l-b1:orange:net";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
net2 {
label = "dir-860l-b1:green:net";
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x4000>;
read-only;
};
radio: partition@34000 {
label = "radio";
reg = <0x34000 0x4000>;
read-only;
};
factory: partition@38000 {
label = "factory";
reg = <0x38000 0x8000>;
read-only;
};
partition@40000 {
label = "defaults";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0x2000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&radio 0>;
ieee80211-freq-limit = <2400000 2500000>;
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
ralink,function = "gpio";
};
};
};