openwrt/target/linux/ramips/dts/AWUSFREE1.dts
Mathias Kresin 53624c1702 ramips: fix dtc warnings
Fix individual boards dtc warnings or obvious mistakes.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-08-04 08:39:35 +02:00

167 lines
3.6 KiB
Plaintext

/*
* BSD LICENSE
*
* Copyright (C) 2018 Piotr Dymacz <pepe2k@gmail.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the names of the copyright holders nor the names of any
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "alfa-network,awusfree1", "mediatek,mt7628an-soc";
model = "ALFA Network AWUSFREE1";
aliases {
led-status = &led_system;
};
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "awusfree1:orange:system";
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
wlan {
label = "awusfree1:blue:wlan";
gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
};
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
};
&ehci {
status = "disabled";
};
&esw {
mediatek,portdisable = <0x1e>;
};
&ethernet {
mtd-mac-address = <&factory 0x2e>;
};
&gpio1 {
status = "okay";
};
&ohci {
status = "disabled";
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "p0led_an", "wdt", "wled_an";
ralink,function = "gpio";
};
ext_lna {
ralink,group = "uart1";
ralink,function = "sw_r";
};
ext_pa {
ralink,group = "i2s";
ralink,function = "antenna";
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x1000>;
};
partition@31000 {
label = "config";
reg = <0x31000 0xf000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&wmac {
status = "okay";
mediatek,mtd-eeprom = <&factory 0x0>;
};