openwrt/target/linux/ath79/dts/ar9344_ocedo_raccoon.dts
Rosen Penev 9783340af9 ath79: ar: convert to nvmem-layout
Will allow removing deprecated mac-address-increment.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-25 21:34:18 -08:00

197 lines
3.2 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "OCEDO Raccoon";
compatible = "ocedo,raccoon", "qca,ar9344";
chosen {
bootargs = "console=ttyS0,115200n8";
};
aliases {
led-boot = &led_system;
led-failsafe = &led_system;
led-running = &led_system;
led-upgrade = &led_system;
};
leds {
compatible = "gpio-leds";
power {
label = "green:power";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "yellow:wlan24";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
led_system: system {
label = "blue:sys";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
};
ath9k-leds {
compatible = "gpio-leds";
wlan5g {
label = "red:wlan5";
gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&ref {
clock-frequency = <40000000>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <50000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
/* Dual-Flash layout combined */
compatible = "denx,uimage";
label = "firmware";
reg = <0x050000 0xe80000>;
};
partition@ed0000 {
label = "data";
reg = <0xed0000 0x110000>;
read-only;
};
partition@fe0000 {
label = "id";
reg = <0xfe0000 0x010000>;
read-only;
};
partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_art_0: macaddr@0 {
reg = <0x0 0x6>;
};
macaddr_art_6: macaddr@6 {
reg = <0x6 0x6>;
};
macaddr_art_c: macaddr@c {
reg = <0xc 0x6>;
};
calibration_art_1000: calibration@1000 {
reg = <0x1000 0x440>;
};
calibration_art_5000: calibration@5000 {
reg = <0x5000 0x440>;
};
};
};
};
};
};
&pcie {
status = "okay";
ath9k: wifi@0,0 {
compatible = "pci168c,0030";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&macaddr_art_c>, <&calibration_art_5000>;
nvmem-cell-names = "mac-address", "calibration";
#gpio-cells = <2>;
gpio-controller;
};
};
&wmac {
status = "okay";
nvmem-cells = <&macaddr_art_6>, <&calibration_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
eee-broken-100tx;
eee-broken-1000t;
};
};
&eth0 {
status = "okay";
pll-data = <0x02000000 0x00000101 0x00001313>;
nvmem-cells = <&macaddr_art_0>;
nvmem-cell-names = "mac-address";
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
rxdv-delay = <3>;
rxd-delay = <3>;
txen-delay = <0>;
txd-delay = <0>;
};
};