mirror of
https://github.com/openwrt/openwrt.git
synced 2025-04-10 21:01:21 +00:00
This patch adds supports for the NETGEAR R6200 V1 This device is mainlined in Linux as of 5.4 Specification: - SOC: Broadcom BCM4718A1 (480 MHz) - Flash: 16MB (Macronix MX25L128) - RAM: 128MB DDR2 - SWITCH: BCM53125 - Ethernet: 5x GE (1 WAN + 4 LAN, Inverted order) - WLAN 2.4G: In SOC - WLAN 5GHz: miniPCIe card, BCM4352 (ID: 4360) - USB: 1x USB 2.0 port (Type A) - Buttons: Reset, WLAN, WPS - LED: Amber for Power, others need a workaround - UART: 1x UART on PCB LED Issues: They are controlled by a 74HC164 via bit banging(GPIO 6/7) Firmware Install Instructions ============================= Using the device specific .chk, use that file to perform a normal device upgrade in the OEM admin page. Signed-off-by: Edward Matijevic <motolav@gmail.com>
_______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M ----------------------------------------------------- This is the buildsystem for the OpenWrt Linux distribution. To build your own firmware you need a Linux, BSD or MacOSX system (case sensitive filesystem required). Cygwin is unsupported because of the lack of a case sensitive file system. You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers installed. 1. Run "./scripts/feeds update -a" to obtain all the latest package definitions defined in feeds.conf / feeds.conf.default 2. Run "./scripts/feeds install -a" to install symlinks for all obtained packages into package/feeds/ 3. Run "make menuconfig" to select your preferred configuration for the toolchain, target system & firmware packages. 4. Run "make" to build your firmware. This will download all sources, build the cross-compile toolchain and then cross-compile the Linux kernel & all chosen applications for your target system. Sunshine! Your OpenWrt Community http://www.openwrt.org
Description
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
Languages
C
61.6%
Makefile
18.8%
Shell
6.7%
Roff
6.5%
Perl
2.4%
Other
3.8%