mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
55c46cbabd
Hardware Spec
-SoC: Rockchip RK3588S
CPU: Quad-core ARM Cortex-A76(up to 2.4GHz) and quad-core Cortex-A55 CPU (up to 1.8GHz)
GPU: Mali-G610 MP4, compatible with OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan1.2
VPU: 8K@60fps H.265 and VP9 decoder, 8K@30fps H.264 decoder, 4K@60fps AV1 decoder, 8K@30fps H.264 and H.265
NPU: 6TOPs, supports INT4/INT8/INT16/FP16
-RAM: 64-bit 4GB/8GB LPDDR4X at 2133MHz
-Flash: 32GB/None eMMC, at HS400 mode
-Ethernet: one Native Gigabit Ethernet, and one PCIe 2.5G Ethernet
-USB: one USB 3.0 Type-A and one USB 2.0 Type-A
-PCIe: one M.2 Key M connector with PCIe 2.1 x1
-HDMI:
compatible with HDMI2.1, HDMI2.0, and HDMI1.4 operation
support up to 7680x4320@60Hz
Support RGB/YUV(up to 10bit) format
-microSD: support up to SDR104 mode
-GPIO:
30-pin 2.54mm header connector
up to 1x SPI, 3x UARTs, 3x I2Cs, 2x SPDIFs, 1x I2Ss, 3x PWMs, 20x GPIOs
-Debug: UART via 3-Pin 2.54mm header, or on-board USB-C to UART
-LEDs: 4 x GPIO Controlled LED (SYS, WAN, LAN, LED1)
-others:
2 Pin 1.27/1.25mm RTC battery input connector for low power RTC IC HYM8563TS
MASK button for eMMC update
one user button
-Power supply: USB-C, support PD, 5V/9V/12V/20V input
-PCB: 8 Layer, 62x90x1.6mm
-Ambient Operating Temperature: 0℃ to 70℃
Installation:
Uncompress the OpenWrt sysupgrade and write image to the SD card using dd (dd if=*.img of=/*)
eMMC Installation:
Boot from the SD card
Uncompress the OpenWrt sysupgrade image
fash to eMMC : dd if=*.img of=/dev/mmcblk1
sync
remove SD card
reboot
Signed-off-by: Antonio Flores <antflores627@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/16275
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
43 lines
1.5 KiB
Diff
43 lines
1.5 KiB
Diff
From d5f1d7437451dbd86a91747793ecd7842e0ce88f Mon Sep 17 00:00:00 2001
|
|
From: Muhammed Efe Cetin <efectn@protonmail.com>
|
|
Date: Sat, 30 Dec 2023 14:18:01 +0300
|
|
Subject: [PATCH] arm64: dts: rockchip: Add support for NanoPi R6C
|
|
|
|
NanoPi R6C is mostly same as R6S variant. It has M2 port instead of a
|
|
NIC port and different led labeling.
|
|
|
|
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
|
|
Link: https://lore.kernel.org/r/0f9ee0baa6c9de4d54dd6d13957ca15a63ec934f.1703934548.git.efectn@protonmail.com
|
|
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
---
|
|
arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
.../arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts | 14 ++++++++++++++
|
|
2 files changed, 15 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
|
|
|
|
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
@@ -109,4 +109,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-ro
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6s.dtb
|
|
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-nanopi-r6c.dtb
|
|
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6c.dts
|
|
@@ -0,0 +1,14 @@
|
|
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "rk3588s-nanopi-r6s.dts"
|
|
+
|
|
+/ {
|
|
+ model = "FriendlyElec NanoPi R6C";
|
|
+ compatible = "friendlyarm,nanopi-r6c", "rockchip,rk3588s";
|
|
+};
|
|
+
|
|
+&lan2_led {
|
|
+ label = "user_led";
|
|
+};
|