mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
7abc89dabe
It's upstream and a replacement for the swconfig driver. Signed-off-by: Rosen Penev <rosenp@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16124 Signed-off-by: Robert Marko <robimarko@gmail.com>
127 lines
4.7 KiB
Makefile
127 lines
4.7 KiB
Makefile
define Build/MultiImage
|
|
rm -rf $@.fakerd $@.new
|
|
|
|
dd if=/dev/zero of=$@.fakerd bs=32 count=1 conv=sync
|
|
|
|
-$(STAGING_DIR_HOST)/bin/mkimage -A $(LINUX_KARCH) -O linux -T multi -C $(1) \
|
|
-a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY) -n '$(BOARD_NAME) initramfs' \
|
|
-d $@:$@.fakerd:$(KDIR)/image-$(firstword $(DEVICE_DTS)).dtb $@.new
|
|
mv $@.new $@
|
|
rm -rf $@.fakerd
|
|
endef
|
|
|
|
define Device/aerohive_hiveap-330
|
|
DEVICE_VENDOR := Aerohive
|
|
DEVICE_MODEL := HiveAP-330
|
|
DEVICE_ALT0_VENDOR := Aerohive
|
|
DEVICE_ALT0_MODEL := HiveAP-350
|
|
DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-hwmon-lm70
|
|
BLOCKSIZE := 128k
|
|
KERNEL := kernel-bin | uImage none
|
|
KERNEL_INITRAMFS := kernel-bin | uImage none
|
|
KERNEL_NAME := simpleImage.hiveap-330
|
|
KERNEL_SIZE := 16m
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL_ENTRY := 0x1500000
|
|
KERNEL_LOADADDR := 0x1500000
|
|
# append-dtb is still needed, as otherwise u-boot bootm complains
|
|
# about not having a FDT to edit.
|
|
IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | append-kernel | \
|
|
append-rootfs | pad-rootfs | check-size | append-metadata
|
|
IMAGE_SIZE = 63m
|
|
DEVICE_COMPAT_VERSION := 2.0
|
|
DEVICE_COMPAT_MESSAGE := \n$\
|
|
!The partitioning of the HiveAP 330 has changed! \n$\
|
|
To upgrade, please take a look at the install instructions over \
|
|
at the device's wiki: <https://openwrt.org/toh/aerohive/hiveap-330> \n$\
|
|
An abridged version for the console is provided here for comfort. \n$\
|
|
Run the following script into a shell on the device and retry this \
|
|
sysupgrade again: \n$\
|
|
cat <<- "EOF" > /tmp/uboot-fix.sh; sh /tmp/uboot-fix.sh \n$\
|
|
. /lib/functions.sh \n$\
|
|
. /lib/functions/system.sh \n$\
|
|
opkg update && opkg install uboot-envtools kmod-mtd-rw || exit 2 \n$\
|
|
insmod mtd-rw i_want_a_brick=y || exit 3 \n$\
|
|
echo "/dev/mtd$$$$(find_mtd_index u-boot-env) 0x0 0x20000 0x10000" > "/etc/fw_env.config" \n$\
|
|
fw_setenv owrt_boot 'setenv bootargs console=ttyS0,9600;bootm 0xEC040000 - 0xEC000000' \n$\
|
|
cp "/dev/mtd$$$$(find_mtd_index 'u-boot')" /tmp/uboot \n$\
|
|
cp /tmp/uboot /tmp/uboot_patched \n$\
|
|
strings -td < /tmp/uboot | grep '^ *[0-9]* *\\(run owrt_boot\\|setenv bootargs\\).*cp\\.l' | \n$\
|
|
awk '{print $$$$1}' | \n$\
|
|
while read offset; do \n$\
|
|
echo -n "run owrt_boot; " | dd of=/tmp/uboot_patched bs=1 seek=$$$${offset} conv=notrunc \n$\
|
|
done \n$\
|
|
mtd write /tmp/uboot_patched u-boot \n$\
|
|
uci set system.@system[0].compat_version=2.0; uci commit; \n$\
|
|
EOF \n$\
|
|
\n$\
|
|
Note that if this fails, you will need to use the serial console \n$\
|
|
to re-install OpenWrt. \n$\
|
|
Note that after this sysupgrade, the AP will be unavailable for 7 \n$\
|
|
minutes to reformat flash."
|
|
|
|
endef
|
|
TARGET_DEVICES += aerohive_hiveap-330
|
|
|
|
define Device/enterasys_ws-ap3710i
|
|
DEVICE_VENDOR := Enterasys
|
|
DEVICE_MODEL := WS-AP3710i
|
|
BLOCKSIZE := 128k
|
|
KERNEL_NAME := simpleImage.ws-ap3710i
|
|
KERNEL_ENTRY := 0x1500000
|
|
KERNEL_LOADADDR := 0x1500000
|
|
KERNEL = kernel-bin | uImage none
|
|
KERNEL_INITRAMFS := kernel-bin | uImage none
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += enterasys_ws-ap3710i
|
|
|
|
define Device/extreme-networks_ws-ap3825i
|
|
DEVICE_VENDOR := Extreme Networks
|
|
DEVICE_MODEL := WS-AP3825i
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
|
BLOCKSIZE := 128k
|
|
KERNEL_NAME := simpleImage.ws-ap3825i
|
|
KERNEL_ENTRY := 0x1500000
|
|
KERNEL_LOADADDR := 0x1500000
|
|
KERNEL = kernel-bin | fit none $(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += extreme-networks_ws-ap3825i
|
|
|
|
define Device/hpe_msm460
|
|
DEVICE_VENDOR := Hewlett-Packard
|
|
DEVICE_MODEL := MSM460
|
|
KERNEL = kernel-bin | fit none $(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
KERNEL_NAME := zImage.la3000000
|
|
KERNEL_ENTRY := 0x3000000
|
|
KERNEL_LOADADDR := 0x3000000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBINIZE_OPTS := -E 5
|
|
IMAGES := factory.bin sysupgrade.bin
|
|
IMAGE/factory.bin := append-ubi
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += hpe_msm460
|
|
|
|
define Device/ocedo_panda
|
|
DEVICE_VENDOR := OCEDO
|
|
DEVICE_MODEL := Panda
|
|
DEVICE_PACKAGES := kmod-rtc-ds1307
|
|
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
BLOCKSIZE := 128k
|
|
IMAGES := fdt.bin sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/fdt.bin := append-dtb
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Config cannot be migrated from swconfig to DSA
|
|
endef
|
|
TARGET_DEVICES += ocedo_panda
|