mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 17:18:59 +00:00
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
108 lines
4.1 KiB
Diff
108 lines
4.1 KiB
Diff
From 85cc26d5496f073fc7e5dc33f8c9fd5c7aea93c6 Mon Sep 17 00:00:00 2001
|
|
From: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
|
|
Date: Mon, 22 Apr 2024 13:06:21 +0100
|
|
Subject: [PATCH 1050/1085] DRM: rp1: rp1-dsi: Fix escape clock divider and
|
|
timeouts.
|
|
|
|
Escape clock divider was fixed at 5, which is correct at 800Mbps/lane
|
|
but increasingly out of spec for higher rates. Compute it correctly.
|
|
|
|
High speed timeout was fixed at 5*512 == 2560 byte-clocks per lane.
|
|
Compute it conservatively to be 8/7 times the line period (assuming
|
|
there will be a transition to LP some time during each scanline?)
|
|
keeping the old value as a lower bound. Increase LPRX TO to 1024,
|
|
and BTA TO to 0xb00 (same value as in bridge/synopsys/dw-mipi-dsi).
|
|
|
|
(No change to LP_CMD_TIM. To do: compute this correctly.)
|
|
|
|
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
|
|
---
|
|
drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi_dsi.c | 39 ++++++++++++++---------
|
|
1 file changed, 24 insertions(+), 15 deletions(-)
|
|
|
|
--- a/drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi_dsi.c
|
|
+++ b/drivers/gpu/drm/rp1/rp1-dsi/rp1_dsi_dsi.c
|
|
@@ -1336,10 +1336,17 @@ static u32 get_colorcode(enum mipi_dsi_p
|
|
return 0x005;
|
|
}
|
|
|
|
+/* Maximum frequency for LP escape clock (20MHz), and some magic numbers */
|
|
+#define RP1DSI_ESC_CLK_KHZ 20000
|
|
+#define RP1DSI_TO_CLK_DIV 5
|
|
+#define RP1DSI_HSTX_TO_MIN 0x200
|
|
+#define RP1DSI_LPRX_TO_VAL 0x400
|
|
+#define RP1DSI_BTA_TO_VAL 0xd00
|
|
+
|
|
void rp1dsi_dsi_setup(struct rp1_dsi *dsi, struct drm_display_mode const *mode)
|
|
{
|
|
u32 timeout, mask, vid_mode_cfg;
|
|
- u32 freq_khz;
|
|
+ int lane_kbps;
|
|
unsigned int bpp = mipi_dsi_pixel_format_to_bpp(dsi->display_format);
|
|
|
|
DSI_WRITE(DSI_PHY_IF_CFG, dsi->lanes - 1);
|
|
@@ -1349,28 +1356,33 @@ void rp1dsi_dsi_setup(struct rp1_dsi *ds
|
|
/* a conservative guess (LP escape is slow!) */
|
|
DSI_WRITE(DSI_DPI_LP_CMD_TIM, 0x00100000);
|
|
|
|
- /* Drop to LP where possible */
|
|
+ /* Drop to LP where possible; use LP Escape for all commands */
|
|
vid_mode_cfg = 0xbf00;
|
|
if (!(dsi->display_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE))
|
|
vid_mode_cfg |= 0x01;
|
|
if (dsi->display_flags & MIPI_DSI_MODE_VIDEO_BURST)
|
|
vid_mode_cfg |= 0x02;
|
|
DSI_WRITE(DSI_VID_MODE_CFG, vid_mode_cfg);
|
|
-
|
|
- /* Use LP Escape Data signalling for all commands */
|
|
DSI_WRITE(DSI_CMD_MODE_CFG, 0x10F7F00);
|
|
+
|
|
/* Select Command Mode */
|
|
DSI_WRITE(DSI_MODE_CFG, 1);
|
|
- /* XXX magic number */
|
|
- DSI_WRITE(DSI_TO_CNT_CFG, 0x02000200);
|
|
- /* XXX magic number */
|
|
- DSI_WRITE(DSI_BTA_TO_CNT, 0x800);
|
|
|
|
+ /* Set timeouts and clock dividers */
|
|
+ DSI_WRITE(DSI_TO_CNT_CFG,
|
|
+ (max((bpp * mode->htotal) / (7 * RP1DSI_TO_CLK_DIV * dsi->lanes),
|
|
+ RP1DSI_HSTX_TO_MIN) << 16) |
|
|
+ RP1DSI_LPRX_TO_VAL);
|
|
+ DSI_WRITE(DSI_BTA_TO_CNT, RP1DSI_BTA_TO_VAL);
|
|
+ lane_kbps = (bpp * mode->clock) / dsi->lanes;
|
|
+ DSI_WRITE(DSI_CLKMGR_CFG,
|
|
+ (RP1DSI_TO_CLK_DIV << 8) |
|
|
+ max(2, lane_kbps / (8 * RP1DSI_ESC_CLK_KHZ) + 1));
|
|
+
|
|
+ /* Configure video timings */
|
|
DSI_WRITE(DSI_VID_PKT_SIZE, mode->hdisplay);
|
|
DSI_WRITE(DSI_VID_NUM_CHUNKS, 0);
|
|
DSI_WRITE(DSI_VID_NULL_SIZE, 0);
|
|
-
|
|
- /* Note, unlike Argon firmware, here we DON'T consider sync to be concurrent with porch */
|
|
DSI_WRITE(DSI_VID_HSA_TIME,
|
|
(bpp * (mode->hsync_end - mode->hsync_start)) / (8 * dsi->lanes));
|
|
DSI_WRITE(DSI_VID_HBP_TIME,
|
|
@@ -1381,9 +1393,8 @@ void rp1dsi_dsi_setup(struct rp1_dsi *ds
|
|
DSI_WRITE(DSI_VID_VFP_LINES, (mode->vsync_start - mode->vdisplay));
|
|
DSI_WRITE(DSI_VID_VACTIVE_LINES, mode->vdisplay);
|
|
|
|
- freq_khz = (bpp * mode->clock) / dsi->lanes;
|
|
-
|
|
- dphy_init_khz(dsi, rp1dsi_refclk_freq(dsi) / 1000, freq_khz);
|
|
+ /* Init PHY */
|
|
+ dphy_init_khz(dsi, rp1dsi_refclk_freq(dsi) / 1000, lane_kbps);
|
|
|
|
DSI_WRITE(DSI_PHY_TMR_LPCLK_CFG,
|
|
(hsfreq_table[dsi->hsfreq_index].clk_lp2hs << DSI_PHY_TMR_LP2HS_LSB) |
|
|
@@ -1392,8 +1403,6 @@ void rp1dsi_dsi_setup(struct rp1_dsi *ds
|
|
(hsfreq_table[dsi->hsfreq_index].data_lp2hs << DSI_PHY_TMR_LP2HS_LSB) |
|
|
(hsfreq_table[dsi->hsfreq_index].data_hs2lp << DSI_PHY_TMR_HS2LP_LSB));
|
|
|
|
- DSI_WRITE(DSI_CLKMGR_CFG, 0x00000505);
|
|
-
|
|
/* Wait for PLL lock */
|
|
for (timeout = (1 << 14); timeout != 0; --timeout) {
|
|
usleep_range(10, 50);
|