Jan-Niklas Burfeind 6cd1035d8d ramips: add support for Wavlink WS-WN572HP3 4G ... Wavlink WS-WN572HP3 4G is an 802.11ac dual-band outdoor router with LTE support. Specifications; * Soc: MT7621DAT * RAM: 128MiB * Flash: NOR 16MiB GD-25Q128ESIG3 * Wi-Fi: * MT7613BEN: 5GHz * MT7603EN: 2.4GHz * Ethernet: 2x 1GbE * USB: None - only used internally * LTE Modem: Quectel EC200T-EU * UART: 115200 baud * LEDs: * 7 blue at the front * 1 Power * 2 LAN / WAN * 1 Status * 3 RSSI (annotated 4G) * 1 green at the bottom (4G LED) * Buttons: 1 reset button Installation: * press and hold the reset button while powering on the device * keep it pressed for ten seconds * connect to 192.168.10.1 via webbrowser (chromium/chrome works, at least Firefox 106.0.3 does not) * upload the sysupgrade image, confirm the checksum, wait 2 minutes until the device reboots Revert to stock firmware: * same as installation but use the recovery image for WL-WN572HP3 Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> (cherry picked from commit dce66899bf)		2022-12-09 00:19:44 +01:00
..
imagebuilder	imagebuilder: export SOURCE_DATE_EPOCH to environment	2022-04-10 16:32:20 +01:00
linux	ramips: add support for Wavlink WS-WN572HP3 4G	2022-12-09 00:19:44 +01:00
llvm-bpf	llvm-bpf: fix rebuild check for generating tarball	2021-11-26 11:37:19 +01:00
sdk	toolchain: Select USE_SSTRIP with external musl toolchain	2022-10-03 19:51:49 +02:00
toolchain	toolchain: switch packaged toolchain to tar.xz	2021-10-21 08:25:38 -10:00
Config.in	base-files: add eMMC sysupgrade support	2021-12-02 20:42:58 +00:00
Makefile	tools/llvm-bpf: move tarball packing to target/llvm-bpf	2021-11-22 12:00:40 +01:00