mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
76d079204d
Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
250 lines
6.8 KiB
Diff
250 lines
6.8 KiB
Diff
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
|
|
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
|
|
@@ -6,7 +6,8 @@ configuration settings. The mode settin
|
|
the 4 GSBI IOs.
|
|
|
|
Required properties:
|
|
-- compatible: must contain "qcom,gsbi-v1.0.0" for APQ8064/IPQ8064
|
|
+- compatible: Should contain "qcom,gsbi-v1.0.0"
|
|
+- cell-index: Should contain the GSBI index
|
|
- reg: Address range for GSBI registers
|
|
- clocks: required clock
|
|
- clock-names: must contain "iface" entry
|
|
@@ -16,6 +17,8 @@ Required properties:
|
|
Optional properties:
|
|
- qcom,crci : indicates CRCI MUX value for QUP CRCI ports. Please reference
|
|
dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
|
|
+- syscon-tcsr: indicates phandle of TCSR syscon node. Required if child uses
|
|
+ dma.
|
|
|
|
Required properties if child node exists:
|
|
- #address-cells: Must be 1
|
|
@@ -39,6 +42,7 @@ Example for APQ8064:
|
|
|
|
gsbi4@16300000 {
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
+ cell-index = <4>;
|
|
reg = <0x16300000 0x100>;
|
|
clocks = <&gcc GSBI4_H_CLK>;
|
|
clock-names = "iface";
|
|
@@ -48,6 +52,8 @@ Example for APQ8064:
|
|
qcom,mode = <GSBI_PROT_I2C_UART>;
|
|
qcom,crci = <GSBI_CRCI_QUP>;
|
|
|
|
+ syscon-tcsr = <&tcsr>;
|
|
+
|
|
/* child nodes go under here */
|
|
|
|
i2c_qup4: i2c@16380000 {
|
|
@@ -76,3 +82,9 @@ Example for APQ8064:
|
|
};
|
|
};
|
|
|
|
+ tcsr: syscon@1a400000 {
|
|
+ compatible = "qcom,apq8064-tcsr", "syscon";
|
|
+ reg = <0x1a400000 0x100>;
|
|
+ };
|
|
+
|
|
+
|
|
--- a/drivers/soc/qcom/Kconfig
|
|
+++ b/drivers/soc/qcom/Kconfig
|
|
@@ -4,6 +4,7 @@
|
|
config QCOM_GSBI
|
|
tristate "QCOM General Serial Bus Interface"
|
|
depends on ARCH_QCOM
|
|
+ select MFD_SYSCON
|
|
help
|
|
Say y here to enable GSBI support. The GSBI provides control
|
|
functions for connecting the underlying serial UART, SPI, and I2C
|
|
--- a/drivers/soc/qcom/qcom_gsbi.c
|
|
+++ b/drivers/soc/qcom/qcom_gsbi.c
|
|
@@ -18,22 +18,129 @@
|
|
#include <linux/of.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
+#include <linux/regmap.h>
|
|
+#include <linux/mfd/syscon.h>
|
|
+#include <dt-bindings/soc/qcom,gsbi.h>
|
|
|
|
#define GSBI_CTRL_REG 0x0000
|
|
#define GSBI_PROTOCOL_SHIFT 4
|
|
+#define MAX_GSBI 12
|
|
+
|
|
+#define TCSR_ADM_CRCI_BASE 0x70
|
|
+
|
|
+struct crci_config {
|
|
+ u32 num_rows;
|
|
+ const u32 (*array)[MAX_GSBI];
|
|
+};
|
|
+
|
|
+static const u32 crci_ipq8064[][MAX_GSBI] = {
|
|
+ {
|
|
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
|
|
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
|
|
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
|
|
+ },
|
|
+ {
|
|
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
|
|
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
|
|
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
|
|
+ },
|
|
+};
|
|
+
|
|
+static const struct crci_config config_ipq8064 = {
|
|
+ .num_rows = ARRAY_SIZE(crci_ipq8064),
|
|
+ .array = crci_ipq8064,
|
|
+};
|
|
+
|
|
+static const unsigned int crci_apq8064[][MAX_GSBI] = {
|
|
+ {
|
|
+ 0x001800, 0x006000, 0x000030, 0x0000c0,
|
|
+ 0x000300, 0x000400, 0x000000, 0x000000,
|
|
+ 0x000000, 0x000000, 0x000000, 0x000000
|
|
+ },
|
|
+ {
|
|
+ 0x000000, 0x000000, 0x000000, 0x000000,
|
|
+ 0x000000, 0x000020, 0x0000c0, 0x000000,
|
|
+ 0x000000, 0x000000, 0x000000, 0x000000
|
|
+ },
|
|
+};
|
|
+
|
|
+static const struct crci_config config_apq8064 = {
|
|
+ .num_rows = ARRAY_SIZE(crci_apq8064),
|
|
+ .array = crci_apq8064,
|
|
+};
|
|
+
|
|
+static const unsigned int crci_msm8960[][MAX_GSBI] = {
|
|
+ {
|
|
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
|
|
+ 0x000300, 0x000400, 0x000000, 0x000000,
|
|
+ 0x000000, 0x000000, 0x000000, 0x000000
|
|
+ },
|
|
+ {
|
|
+ 0x000000, 0x000000, 0x000000, 0x000000,
|
|
+ 0x000000, 0x000020, 0x0000c0, 0x000300,
|
|
+ 0x001800, 0x006000, 0x000000, 0x000000
|
|
+ },
|
|
+};
|
|
+
|
|
+static const struct crci_config config_msm8960 = {
|
|
+ .num_rows = ARRAY_SIZE(crci_msm8960),
|
|
+ .array = crci_msm8960,
|
|
+};
|
|
+
|
|
+static const unsigned int crci_msm8660[][MAX_GSBI] = {
|
|
+ { /* ADM 0 - B */
|
|
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
|
|
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
|
|
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
|
|
+ },
|
|
+ { /* ADM 0 - B */
|
|
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
|
|
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
|
|
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
|
|
+ },
|
|
+ { /* ADM 1 - A */
|
|
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
|
|
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
|
|
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
|
|
+ },
|
|
+ { /* ADM 1 - B */
|
|
+ 0x000003, 0x00000c, 0x000030, 0x0000c0,
|
|
+ 0x000300, 0x000c00, 0x003000, 0x00c000,
|
|
+ 0x030000, 0x0c0000, 0x300000, 0xc00000
|
|
+ },
|
|
+};
|
|
+
|
|
+static const struct crci_config config_msm8660 = {
|
|
+ .num_rows = ARRAY_SIZE(crci_msm8660),
|
|
+ .array = crci_msm8660,
|
|
+};
|
|
|
|
struct gsbi_info {
|
|
struct clk *hclk;
|
|
u32 mode;
|
|
u32 crci;
|
|
+ struct regmap *tcsr;
|
|
+};
|
|
+
|
|
+static const struct of_device_id tcsr_dt_match[] = {
|
|
+ { .compatible = "qcom,tcsr-ipq8064", .data = &config_ipq8064},
|
|
+ { .compatible = "qcom,tcsr-apq8064", .data = &config_apq8064},
|
|
+ { .compatible = "qcom,tcsr-msm8960", .data = &config_msm8960},
|
|
+ { .compatible = "qcom,tcsr-msm8660", .data = &config_msm8660},
|
|
+ { },
|
|
};
|
|
|
|
static int gsbi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *node = pdev->dev.of_node;
|
|
+ struct device_node *tcsr_node;
|
|
+ const struct of_device_id *match;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
struct gsbi_info *gsbi;
|
|
+ int i;
|
|
+ u32 mask, gsbi_num;
|
|
+ const struct crci_config *config = NULL;
|
|
|
|
gsbi = devm_kzalloc(&pdev->dev, sizeof(*gsbi), GFP_KERNEL);
|
|
|
|
@@ -45,6 +152,32 @@ static int gsbi_probe(struct platform_de
|
|
if (IS_ERR(base))
|
|
return PTR_ERR(base);
|
|
|
|
+ /* get the tcsr node and setup the config and regmap */
|
|
+ gsbi->tcsr = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr");
|
|
+
|
|
+ if (!IS_ERR(gsbi->tcsr)) {
|
|
+ tcsr_node = of_parse_phandle(node, "syscon-tcsr", 0);
|
|
+ if (tcsr_node) {
|
|
+ match = of_match_node(tcsr_dt_match, tcsr_node);
|
|
+ if (match)
|
|
+ config = match->data;
|
|
+ else
|
|
+ dev_warn(&pdev->dev, "no matching TCSR\n");
|
|
+
|
|
+ of_node_put(tcsr_node);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ if (of_property_read_u32(node, "cell-index", &gsbi_num)) {
|
|
+ dev_err(&pdev->dev, "missing cell-index\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ if (gsbi_num < 1 || gsbi_num > MAX_GSBI) {
|
|
+ dev_err(&pdev->dev, "invalid cell-index\n");
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
if (of_property_read_u32(node, "qcom,mode", &gsbi->mode)) {
|
|
dev_err(&pdev->dev, "missing mode configuration\n");
|
|
return -EINVAL;
|
|
@@ -64,6 +197,25 @@ static int gsbi_probe(struct platform_de
|
|
writel_relaxed((gsbi->mode << GSBI_PROTOCOL_SHIFT) | gsbi->crci,
|
|
base + GSBI_CTRL_REG);
|
|
|
|
+ /*
|
|
+ * modify tcsr to reflect mode and ADM CRCI mux
|
|
+ * Each gsbi contains a pair of bits, one for RX and one for TX
|
|
+ * SPI mode requires both bits cleared, otherwise they are set
|
|
+ */
|
|
+ if (config) {
|
|
+ for (i = 0; i < config->num_rows; i++) {
|
|
+ mask = config->array[i][gsbi_num - 1];
|
|
+
|
|
+ if (gsbi->mode == GSBI_PROT_SPI)
|
|
+ regmap_update_bits(gsbi->tcsr,
|
|
+ TCSR_ADM_CRCI_BASE + 4 * i, mask, 0);
|
|
+ else
|
|
+ regmap_update_bits(gsbi->tcsr,
|
|
+ TCSR_ADM_CRCI_BASE + 4 * i, mask, mask);
|
|
+
|
|
+ }
|
|
+ }
|
|
+
|
|
/* make sure the gsbi control write is not reordered */
|
|
wmb();
|
|
|