mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
6cc14bf66a
Telenor quirks -------------- The operator specific firmware running on the Telenor branded ZyXEL EX5700 includes U-Boot modifications affecting the OpenWrt installation. Notable changes to U-Boot include - environment is stored in RAM and reset to defaults when power cycled - dual partition scheme with "nomimal" or "rescue" systems, falling back to "rescue" unless the OS signals success in 3 attempts - several runtime additions to the device-tree Some of these modifications have side effects requiring workarounds - U-Boot modifies /chosen/bootargs in an unsafe manner, and will crash unless this node exists - U-Boot verifies that the selected rootfs UBI volume exists, and refuses to boot if it doesn't. The chosen "rootfs" volume must contain a squashfs signature even for tftp or initramfs booting. - U-Boot parses the "factoryparams" UBI volume, setting the "ethaddr" variable to the label mac. But "factoryparams" does not always exist. Instead there is a "RIP" volume containing all the factory data. Copying the "RIP" volume to "factoryparams" will fix this Hardware -------- SOC: MediaTek MT7986 RAM: 1GB DDR4 FLASH: 512MB SPI-NAND (Mikron xxx) WIFI: Mediatek MT7986 802.11ax 5 GHz Mediatek MT7916 DBDC 802.11ax 2.4 + 6 GHz ETH: MediaTek MT7531 Switch + SoC 3 x builtin 1G phy (lan1, lan2, lan3) 2 x MaxLinear GPY211C 2.5 N-Base-T phy (lan4, wan) USB: 1 x USB 3.2 Enhanced SuperSpeed port UART: 3V3 115200 8N1 (Pinout: GND KEY RX TX VCC) Installation ------------ 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server reachable at 192.168.1.2/24. Rename the image to C0A80101.img. 2. Connect the TFTP server to lan1, lan2 or lan3. Connect to the serial console, Interrupt the autoboot process by pressing ESC when prompted. 3. Download and boot the OpenWrt initramfs image. $ env set uboot_bootcount 0 $ env set firmware nominal $ tftpboot $ bootm 4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Missing features ---------------- - The "lan1", "lan2" and "lan3" port LEDs are driven by the switch but OpenWrt does not correctly configure the output. - The "lan4" and "wan" port LEDs are driven by the GPH211C phys and not configured by OpenWrt. Signed-off-by: Bjørn Mork <bjorn@mork.no>
543 lines
20 KiB
Makefile
543 lines
20 KiB
Makefile
DTS_DIR := $(DTS_DIR)/mediatek
|
|
|
|
define Image/Prepare
|
|
# For UBI we want only one extra block
|
|
rm -f $(KDIR)/ubi_mark
|
|
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
|
|
endef
|
|
|
|
define Build/mt7981-bl2
|
|
cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
|
|
endef
|
|
|
|
define Build/mt7981-bl31-uboot
|
|
cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
|
|
endef
|
|
|
|
define Build/mt7986-bl2
|
|
cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
|
|
endef
|
|
|
|
define Build/mt7986-bl31-uboot
|
|
cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
|
|
endef
|
|
|
|
define Build/mt7986-gpt
|
|
cp $@ $@.tmp 2>/dev/null || true
|
|
ptgen -g -o $@.tmp -a 1 -l 1024 \
|
|
$(if $(findstring sdmmc,$1), \
|
|
-H \
|
|
-t 0x83 -N bl2 -r -p 4079k@17k \
|
|
) \
|
|
-t 0x83 -N ubootenv -r -p 512k@4M \
|
|
-t 0x83 -N factory -r -p 2M@4608k \
|
|
-t 0xef -N fip -r -p 4M@6656k \
|
|
-N recovery -r -p 32M@12M \
|
|
$(if $(findstring sdmmc,$1), \
|
|
-N install -r -p 20M@44M \
|
|
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
|
|
) \
|
|
$(if $(findstring emmc,$1), \
|
|
-t 0x2e -N production -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
|
|
)
|
|
cat $@.tmp >> $@
|
|
rm $@.tmp
|
|
endef
|
|
|
|
metadata_gl_json = \
|
|
'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
|
|
"metadata_version": "1.1", \
|
|
"compat_version": "$(call json_quote,$(compat_version))", \
|
|
$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
|
|
$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
|
|
[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
|
|
"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
|
|
$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
|
|
"version": { \
|
|
"release": "$(call json_quote,$(VERSION_NUMBER))", \
|
|
"date": "$(shell TZ='Asia/Chongqing' date '+%Y%m%d%H%M%S')", \
|
|
"dist": "$(call json_quote,$(VERSION_DIST))", \
|
|
"version": "$(call json_quote,$(VERSION_NUMBER))", \
|
|
"revision": "$(call json_quote,$(REVISION))", \
|
|
"target": "$(call json_quote,$(TARGETID))", \
|
|
"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
|
|
} \
|
|
}'
|
|
|
|
define Build/append-gl-metadata
|
|
$(if $(SUPPORTED_DEVICES),-echo $(call metadata_gl_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
|
|
sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
|
|
[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
|
|
cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
|
|
usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
|
|
ucert -A -c "$@.ucert" -x "$@.sig" ;\
|
|
fwtool -S "$@.ucert" "$@" ;\
|
|
}
|
|
endef
|
|
|
|
define Build/zyxel-nwa-fit-filogic
|
|
$(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
|
|
$@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
|
|
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
|
|
@mv $@.new $@
|
|
endef
|
|
|
|
define Device/asus_tuf-ax4200
|
|
DEVICE_VENDOR := ASUS
|
|
DEVICE_MODEL := TUF-AX4200
|
|
DEVICE_DTS := mt7986a-asus-tuf-ax4200
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += asus_tuf-ax4200
|
|
|
|
define Device/acer_predator-w6
|
|
DEVICE_VENDOR := Acer
|
|
DEVICE_MODEL := Predator W6
|
|
DEVICE_DTS := mt7986a-acer-predator-w6
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += acer_predator-w6
|
|
|
|
define Device/bananapi_bpi-r3
|
|
DEVICE_VENDOR := Bananapi
|
|
DEVICE_MODEL := BPi-R3
|
|
DEVICE_DTS := mt7986a-bananapi-bpi-r3
|
|
DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
|
|
DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_DTS_LOADADDR := 0x43f00000
|
|
DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7986-firmware kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_LOADADDR := 0x44000000
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
ARTIFACTS := \
|
|
emmc-preloader.bin emmc-bl31-uboot.fip \
|
|
nor-preloader.bin nor-bl31-uboot.fip \
|
|
sdcard.img.gz \
|
|
snand-preloader.bin snand-bl31-uboot.fip
|
|
ARTIFACT/emmc-preloader.bin := mt7986-bl2 emmc-ddr4
|
|
ARTIFACT/emmc-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-emmc
|
|
ARTIFACT/nor-preloader.bin := mt7986-bl2 nor-ddr4
|
|
ARTIFACT/nor-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-nor
|
|
ARTIFACT/snand-preloader.bin := mt7986-bl2 spim-nand-ddr4
|
|
ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
|
|
ARTIFACT/sdcard.img.gz := mt7986-gpt sdmmc |\
|
|
pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
|
|
pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
|
|
pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
|
|
) \
|
|
pad-to 44M | mt7986-bl2 spim-nand-ddr4 |\
|
|
pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
|
|
pad-to 49M | mt7986-bl2 nor-ddr4 |\
|
|
pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
|
|
pad-to 51M | mt7986-bl2 emmc-ddr4 |\
|
|
pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
|
|
pad-to 56M | mt7986-gpt emmc |\
|
|
$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
|
|
pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
|
|
) \
|
|
gzip
|
|
IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
|
|
DEVICE_DTC_FLAGS := --pad 4096
|
|
DEVICE_COMPAT_VERSION := 1.1
|
|
DEVICE_COMPAT_MESSAGE := Device tree overlay mechanism needs bootloader update
|
|
endef
|
|
TARGET_DEVICES += bananapi_bpi-r3
|
|
|
|
define Device/cudy_wr3000-v1
|
|
DEVICE_VENDOR := Cudy
|
|
DEVICE_MODEL := WR3000
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_DTS := mt7981b-cudy-wr3000-v1
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_DTS_LOADADDR := 0x47000000
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE_SIZE := 15424k
|
|
SUPPORTED_DEVICES += R31
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware
|
|
endef
|
|
TARGET_DEVICES += cudy_wr3000-v1
|
|
|
|
define Device/glinet_gl-mt3000
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT3000
|
|
DEVICE_DTS := mt7981b-glinet-gl-mt3000
|
|
DEVICE_DTS_DIR := ../dts
|
|
SUPPORTED_DEVICES += glinet,mt3000-snand
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 246272k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt3000
|
|
|
|
define Device/h3c_magic-nx30-pro
|
|
DEVICE_VENDOR := H3C
|
|
DEVICE_MODEL := Magic NX30 Pro
|
|
DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGE_SIZE := 65536k
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
|
|
endef
|
|
TARGET_DEVICES += h3c_magic-nx30-pro
|
|
|
|
define Device/netgear_wax220
|
|
DEVICE_VENDOR := Netgear
|
|
DEVICE_MODEL := WAX220
|
|
DEVICE_DTS := mt7986b-netgear-wax220
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
IMAGES := sysupgrade.bin
|
|
KERNEL_IN_UBI := 1
|
|
KERNEL := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += netgear_wax220
|
|
|
|
define Device/mediatek_mt7986a-rfb-nand
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7986 rfba AP (NAND)
|
|
DEVICE_DTS := mt7986a-rfb-spim-nand
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
KERNEL = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7986a-rfb-nand
|
|
|
|
define Device/mediatek_mt7986b-rfb
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MTK7986 rfbb AP
|
|
DEVICE_DTS := mt7986b-rfb
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
SUPPORTED_DEVICES := mediatek,mt7986b-rfb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7986b-rfb
|
|
|
|
define Device/mediatek_mt7988a-rfb-nand
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7988a nand rfb
|
|
DEVICE_DTS := mt7988a-dsa-10g-spim-nand
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/
|
|
KERNEL_LOADADDR := 0x48000000
|
|
SUPPORTED_DEVICES := mediatek,mt7988a-rfb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += mediatek_mt7988a-rfb-nand
|
|
|
|
define Device/mercusys_mr90x-v1
|
|
DEVICE_VENDOR := Mercusys
|
|
DEVICE_MODEL := MR90X v1
|
|
DEVICE_DTS := mt7986b-mercusys-mr90x-v1
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 51200k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += mercusys_mr90x-v1
|
|
|
|
define Device/qihoo_360t7
|
|
DEVICE_VENDOR := Qihoo
|
|
DEVICE_MODEL := 360T7
|
|
DEVICE_DTS := mt7981b-qihoo-360t7
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
|
|
endef
|
|
TARGET_DEVICES += qihoo_360t7
|
|
|
|
define Device/tplink_tl-xdr-common
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
|
|
endef
|
|
|
|
define Device/tplink_tl-xdr4288
|
|
DEVICE_MODEL := TL-XDR4288
|
|
DEVICE_DTS := mt7986a-tplink-tl-xdr4288
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
|
|
$(call Device/tplink_tl-xdr-common)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xdr4288
|
|
|
|
define Device/tplink_tl-xdr6086
|
|
DEVICE_MODEL := TL-XDR6086
|
|
DEVICE_DTS := mt7986a-tplink-tl-xdr6086
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
|
|
$(call Device/tplink_tl-xdr-common)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xdr6086
|
|
|
|
define Device/tplink_tl-xdr6088
|
|
DEVICE_MODEL := TL-XDR6088
|
|
DEVICE_DTS := mt7986a-tplink-tl-xdr6088
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
|
|
$(call Device/tplink_tl-xdr-common)
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-xdr6088
|
|
|
|
define Device/xiaomi_mi-router-wr30u-112m-nmbm
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-112m-nmbm
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
|
|
endif
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-wr30u-112m-nmbm
|
|
|
|
define Device/xiaomi_mi-router-wr30u-stock
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router WR30U (stock layout)
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
|
|
endif
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
|
|
|
|
define Device/xiaomi_mi-router-wr30u-ubootmod
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
|
|
DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
|
|
DEVICE_DTS_DIR := ../dts
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
IMAGES := sysupgrade.itb
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
|
|
ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS += initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
|
|
|
|
define Device/xiaomi_redmi-router-ax6000-stock
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Redmi Router AX6000 (stock layout)
|
|
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS := initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
|
|
endif
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
|
|
|
|
define Device/xiaomi_redmi-router-ax6000-ubootmod
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
|
|
DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
|
|
KERNEL_INITRAMFS_SUFFIX := -recovery.itb
|
|
IMAGES := sysupgrade.itb
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
KERNEL_IN_UBI := 1
|
|
UBOOTENV_IN_UBI := 1
|
|
KERNEL := kernel-bin | gzip
|
|
KERNEL_INITRAMFS := kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
|
|
IMAGE/sysupgrade.itb := append-kernel | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
|
|
ARTIFACTS := preloader.bin bl31-uboot.fip
|
|
ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
|
|
ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
ARTIFACTS += initramfs-factory.ubi
|
|
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
|
|
endif
|
|
endef
|
|
TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
|
|
|
|
define Device/zyxel_ex5601-t0-stock
|
|
DEVICE_VENDOR := Zyxel
|
|
DEVICE_MODEL := EX5601-T0 (stock layout)
|
|
DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
|
|
SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 256k
|
|
PAGESIZE := 4096
|
|
IMAGE_SIZE := 65536k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
KERNEL = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
KERNEL_INITRAMFS = kernel-bin | lzma | \
|
|
fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
|
|
endef
|
|
TARGET_DEVICES += zyxel_ex5601-t0-stock
|
|
|
|
define Device/zyxel_ex5700-telenor
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := EX5700 (Telenor)
|
|
DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7916-firmware kmod-ubootenv-nvram kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 65536k
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_ex5700-telenor
|
|
|
|
define Device/zyxel_nwa50ax-pro
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := NWA50AX Pro
|
|
DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
|
|
DEVICE_DTS_DIR := ../dts
|
|
DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
|
|
DEVICE_DTS_LOADADDR := 0x44000000
|
|
UBINIZE_OPTS := -E 5
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
IMAGE_SIZE := 51200k
|
|
KERNEL_IN_UBI := 1
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += zyxel_nwa50ax-pro
|