openwrt/target/linux/ramips/dts/VOCORE2LITE.dts
Alex Maclean 6031ab345d ramips: move partitions into partition table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-04 08:39:35 +02:00

64 lines
1008 B
Plaintext

/dts-v1/;
#include "VOCORE2.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
compatible = "vocore,vocore2lite", "vocore,vocore2", "mediatek,mt7628an-soc";
model = "VoCore2-Lite";
aliases {
led-status = &led_status;
};
gpio-leds {
compatible = "gpio-leds";
led_status: status {
label = "vocore2lite:green:status";
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};