openwrt/target/linux/ramips/dts/HC5661A.dts
Alex Maclean 6031ab345d ramips: move partitions into partition table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-04 08:39:35 +02:00

134 lines
2.1 KiB
Plaintext

/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "hiwifi,hc5661a", "mediatek,mt7628an-soc";
model = "HiWiFi HC5661A";
aliases {
led-status = &led_system;
};
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
sdhci@10130000 {
status = "okay";
};
gpio-leds {
compatible = "gpio-leds";
led_system: system {
label = "hc5661a:blue:system";
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
};
internet {
label = "hc5661a:blue:internet";
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "hc5661a:blue:wlan2g";
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
};
gpio-keys {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "refclk", "wled_an";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "hw_panic";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf70000>;
};
partition@fc0000 {
label = "oem";
reg = <0xfc0000 0x20000>;
read-only;
};
bdinfo: partition@fe0000 {
label = "bdinfo";
reg = <0xfe0000 0x10000>;
read-only;
};
partition@ff0000 {
label = "backup";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
&ethernet {
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "wllll";
};
&wmac {
status = "okay";
};