openwrt/target/linux/brcm63xx/dts/cpva642.dts
Jonas Gorski 0f063f8ac7 brcm63xx: drop root parameter from cmdline
The root= parameter overrides the automatic rootfs detection by partition
name, so drop it. Fixes boot from flash after renumeration changes of
partitions due to parser changes.

Fixes FS#1350.

Fixes: a27d59bb42 ("brcm63xx: switch to new partition layout specification")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2018-02-13 13:17:26 +01:00

114 lines
1.9 KiB
Plaintext

/dts-v1/;
#include "bcm6358.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Telsey CPVA642-type (CPA-ZNTE60T)";
compatible = "telsey,cpva642", "brcm,bcm6358";
chosen {
bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
stdout-path = "serial0:115200n8";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
reset {
label = "reset";
gpios = <&pinctrl 36 1>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&pinctrl 37 0>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
eth_green {
label = "CPVA642:green:ether";
gpios = <&pinctrl 1 1>;
};
phone2_green {
label = "CPVA642:green:phone2";
gpios = <&pinctrl 2 1>;
};
usb_green {
label = "CPVA642:green:usb";
gpios = <&pinctrl 3 1>;
};
phone1_green {
label = "CPVA642:green:phone1";
gpios = <&pinctrl 4 1>;
};
wifi_red {
label = "CPVA642:red:wifi";
gpios = <&pinctrl 6 1>;
};
link_red {
label = "CPVA642:red:link";
gpios = <&pinctrl 9 1>;
};
link_green {
label = "CPVA642:green:link";
gpios = <&pinctrl 10 1>;
};
power_green {
label = "CPVA642:green:power";
gpios = <&pinctrl 11 1>;
default-state = "on";
};
power_red {
label = "CPVA642:red:power";
gpios = <&pinctrl 14 1>;
};
wifi_green {
label = "CPVA642:green:wifi";
gpios = <&pinctrl 28 0>;
};
};
};
&pflash {
status = "ok";
linux,part-probe = "bcm63xxpart";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe@0 {
label = "CFE";
reg = <0x000000 0x010000>;
read-only;
};
linux@10000 {
label = "linux";
reg = <0x010000 0x7e0000>;
compatible = "brcm,bcm963xx-imagetag";
};
nvram@7f0000 {
label = "nvram";
reg = <0x7f0000 0x010000>;
};
};
};
&uart0 {
status = "ok";
};