mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
9a038e7fd1
Copy config and patches from kernel 5.10 to kernel 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
34 lines
1.6 KiB
Diff
34 lines
1.6 KiB
Diff
From 13ad5ccc093ff448b99ac7e138e91e78796adb48 Mon Sep 17 00:00:00 2001
|
|
From: Ansuel Smith <ansuelsmth@gmail.com>
|
|
Date: Thu, 14 Oct 2021 00:39:12 +0200
|
|
Subject: dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pll
|
|
|
|
Document qca,sgmii-enable-pll binding used in the CPU nodes to
|
|
enable SGMII PLL on MAC config.
|
|
|
|
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
Documentation/devicetree/bindings/net/dsa/qca8k.txt | 10 ++++++++++
|
|
1 file changed, 10 insertions(+)
|
|
|
|
--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
|
|
+++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
|
|
@@ -45,6 +45,16 @@ A CPU port node has the following option
|
|
Mostly used in qca8327 with CPU port 0 set to
|
|
sgmii.
|
|
- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
|
|
+- qca,sgmii-enable-pll : For SGMII CPU port, explicitly enable PLL, TX and RX
|
|
+ chain along with Signal Detection.
|
|
+ This should NOT be enabled for qca8327. If enabled with
|
|
+ qca8327 the sgmii port won't correctly init and an err
|
|
+ is printed.
|
|
+ This can be required for qca8337 switch with revision 2.
|
|
+ A warning is displayed when used with revision greater
|
|
+ 2.
|
|
+ With CPU port set to sgmii and qca8337 it is advised
|
|
+ to set this unless a communication problem is observed.
|
|
|
|
For QCA8K the 'fixed-link' sub-node supports only the following properties:
|
|
|