mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
6bc9a6d0a8
Build and boot tested on the following hardware: * GW54xx * GW53xx * GW52xx * GW51xx Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47331
124 lines
2.6 KiB
C
124 lines
2.6 KiB
C
/*
|
|
* drivers/net/phy/mv88e6176.h
|
|
*
|
|
* Driver for Marvell Switch
|
|
*
|
|
* Author: Tim Harvey
|
|
*
|
|
* Copyright (c) 2014 Tim Harvey <tharvey@gateworks.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#ifndef _GW16083_H_
|
|
#define _GW16083_H_
|
|
|
|
#define MII_MARVELL_PHY_PAGE 22
|
|
|
|
/*
|
|
* I2C Addresses
|
|
*/
|
|
#define GW16083_I2C_ADDR_SFP1 0x50
|
|
#define GW16083_I2C_ADDR_SFP2 0x51
|
|
#define GW16083_I2C_ADDR_EEPROM 0x52
|
|
#define GW16083_I2C_ADDR_PCA9543 0x70
|
|
|
|
/*
|
|
* MV88E1111 PHY Registers
|
|
*/
|
|
enum {
|
|
MII_M1111_PHY_CONTROL = 0,
|
|
MII_M1111_PHY_STATUS = 1,
|
|
MII_M1111_PHY_IDENT0 = 2,
|
|
MII_M1111_PHY_IDENT1 = 3,
|
|
MII_M1111_PHY_EXT_CR = 20,
|
|
MII_M1111_PHY_LED_CONTROL = 24,
|
|
MII_M1111_PHY_EXT_SR = 27,
|
|
};
|
|
|
|
#define MII_M1111_PHY_ID_MASK 0xfffffff0
|
|
#define MII_M1111_PHY_ID 0x01410cc0
|
|
|
|
#define MII_M1111_PHY_CONTROL_RESET (1 << 15)
|
|
#define MII_M1111_PHY_LED_DIRECT 0x4100
|
|
#define MII_M1111_PHY_LED_PULSE_STR 0x4111
|
|
#define MII_M1111_PHY_LED_COMBINE 0x411c
|
|
#define MII_M1111_RX_DELAY 0x80
|
|
#define MII_M1111_TX_DELAY 0x2
|
|
|
|
/*
|
|
* MV88E6176 Switch Registers
|
|
*/
|
|
|
|
/* PHY Addrs */
|
|
#define MV_BASE 0x10
|
|
#define MV_GLOBAL1 0x1b
|
|
#define MV_GLOBAL2 0x1c
|
|
#define MV_GLOBAL3 0x1d
|
|
|
|
/* Global2 Registers */
|
|
enum {
|
|
MV_SMI_PHY_COMMAND = 0x18,
|
|
MV_SMI_PHY_DATA = 0x19,
|
|
MV_SCRATCH_MISC = 0x1A,
|
|
};
|
|
|
|
/* Scratch And Misc Reg offsets */
|
|
enum {
|
|
MV_GPIO_MODE = 0x60,
|
|
MV_GPIO_DIR = 0x62,
|
|
MV_GPIO_DATA = 0x64,
|
|
MV_GPIO76_CNTL = 0x6B,
|
|
MV_GPIO54_CNTL = 0x6A,
|
|
MV_GPIO32_CNTL = 0x69,
|
|
MV_GPIO10_CNTL = 0x68,
|
|
MV_CONFIG0 = 0x70,
|
|
MV_CONFIG1 = 0x71,
|
|
MV_CONFIG2 = 0x72,
|
|
MV_CONFIG3 = 0x73,
|
|
};
|
|
|
|
/* PHY Registers */
|
|
enum {
|
|
MV_PHY_CONTROL = 0x00,
|
|
MV_PHY_STATUS = 0x01,
|
|
MV_PHY_IDENT0 = 0x02,
|
|
MV_PHY_IDENT1 = 0x03,
|
|
MV_PHY_ANEG = 0x04,
|
|
MV_PHY_LINK_ABILITY = 0x05,
|
|
MV_PHY_ANEG_EXPAND = 0x06,
|
|
MV_PHY_XMIT_NEXTP = 0x07,
|
|
MV_PHY_LINK_NEXTP = 0x08,
|
|
MV_PHY_CONTROL1 = 0x10,
|
|
MV_PHY_STATUS1 = 0x11,
|
|
MV_PHY_INTR_EN = 0x12,
|
|
};
|
|
|
|
/* Port Registers */
|
|
enum {
|
|
MV_PORT_STATUS = 0x00,
|
|
MV_PORT_PHYS_CONTROL = 0x01,
|
|
MV_PORT_IDENT = 0x03,
|
|
MV_PORT_CONTROL = 0x04,
|
|
MV_PORT_VLANMAP = 0x06,
|
|
MV_PORT_ASSOC = 0x0b,
|
|
MV_PORT_RXCOUNT = 0x10,
|
|
MV_PORT_TXCOUNT = 0x11,
|
|
};
|
|
|
|
#define SMIBUSY (1<<15)
|
|
#define SMIMODE22 (1<<12)
|
|
#define SMIOP_READ (2<<10)
|
|
#define SMIOP_WRITE (1<<10)
|
|
#define DEVADDR 5
|
|
#define REGADDR 0
|
|
|
|
#define MV_IDENT_MASK 0x0000fff0
|
|
#define MV_IDENT_VALUE 0x00001760
|
|
|
|
#endif /* _GW16083_H_ */
|