mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
6bbca3a09a
This adds the default-state = "on"; statement for the power or primary status LED in DTS on kirkwood. This will ensure that this LED will be lit up very early in the boot process (i.e. before diag.sh is executed) and thus will provide an additional hint to the user when problems arise during early boot process. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
88 lines
1.8 KiB
Diff
88 lines
1.8 KiB
Diff
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
|
|
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
|
|
@@ -18,12 +18,20 @@
|
|
compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
|
|
"marvell,kirkwood";
|
|
|
|
+ aliases {
|
|
+ led-boot = &led_health;
|
|
+ led-failsafe = &led_fault;
|
|
+ led-running = &led_health;
|
|
+ led-upgrade = &led_fault;
|
|
+ };
|
|
+
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x08000000>;
|
|
};
|
|
|
|
chosen {
|
|
+ bootargs = "console=ttyS0,115200";
|
|
stdout-path = "uart0:115200n8";
|
|
};
|
|
|
|
@@ -37,8 +45,8 @@
|
|
eject {
|
|
debounce-interval = <50>;
|
|
wakeup-source;
|
|
- linux,code = <KEY_EJECTCD>;
|
|
- label = "Eject Button";
|
|
+ linux,code = <KEY_RESTART>;
|
|
+ label = "Reset";
|
|
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
@@ -48,12 +56,12 @@
|
|
pinctrl-0 = <&pmx_led_green &pmx_led_red>;
|
|
pinctrl-names = "default";
|
|
|
|
- health {
|
|
+ led_health: health {
|
|
label = "pogoplugv4:green:health";
|
|
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
|
|
default-state = "on";
|
|
};
|
|
- fault {
|
|
+ led_fault: fault {
|
|
label = "pogoplugv4:red:fault";
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
|
};
|
|
@@ -137,29 +145,19 @@
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
- label = "u-boot";
|
|
- reg = <0x00000000 0x200000>;
|
|
+ label = "uboot";
|
|
+ reg = <0x00000000 0x1c0000>;
|
|
read-only;
|
|
};
|
|
|
|
- partition@200000 {
|
|
- label = "uImage";
|
|
- reg = <0x00200000 0x300000>;
|
|
- };
|
|
-
|
|
- partition@500000 {
|
|
- label = "uImage2";
|
|
- reg = <0x00500000 0x300000>;
|
|
+ partition@1c0000 {
|
|
+ label = "uboot_env";
|
|
+ reg = <0x001c0000 0x40000>;
|
|
};
|
|
|
|
- partition@800000 {
|
|
- label = "failsafe";
|
|
- reg = <0x00800000 0x800000>;
|
|
- };
|
|
-
|
|
- partition@1000000 {
|
|
- label = "root";
|
|
- reg = <0x01000000 0x7000000>;
|
|
+ partition@200000 {
|
|
+ label = "ubi";
|
|
+ reg = <0x00200000 0x7e00000>;
|
|
};
|
|
};
|
|
};
|