openwrt

mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 23:42:43 +00:00

This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.

Go to file

Felix Fietkau 6bb7409e5a cns3xxx: Fix laguna arm11mpcore watchdog The ARM11MPCore Timer/Watchdog registers start at offset 0x600 which is where all mpcore-wdt boards point the driver base too. I believe this is wrong because 0x600 is aliased to the timer/watchdog of the 'current CPU' where 0x700 is CPU0's timer/watchdog, and 0x800 is CPU1's timer/watchdog. Thus if your timer/watchdog application is switching between CPU's it can end up writing to the wrong CPU's registers which results in random board resets from watchdog timeouts etc. This patch forces the timer/watchdog driver to use CPU0's registers always. Its my opinion that other mpcore-wdt boards should be doing the same thing. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 33683		2012-10-10 11:38:58 +00:00
docs	kamikaze has been released long ago	2011-02-11 14:04:00 +00:00
include	it's time to break the barriers	2012-10-08 13:12:37 +00:00
package	package/kernel/sound: Add Gateworks Avila Sound SoC package	2012-10-10 11:38:54 +00:00
scripts	AR71xx/9xxx based routers are the most common these days, select that as the default target	2012-09-28 20:54:35 +00:00
target	cns3xxx: Fix laguna arm11mpcore watchdog	2012-10-10 11:38:58 +00:00
toolchain	build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems	2012-09-23 09:50:01 +00:00
tools	mac80211: brcmsmac: use firmware extracted from proprietary driver	2012-10-08 20:18:27 +00:00
.gitattributes	add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files	2012-05-08 13:30:49 +00:00
.gitignore	.gitignore: Ignore Emacs editor generated files	2011-10-31 09:37:59 +00:00
BSDmakefile	add missing copyright header	2007-02-26 01:05:09 +00:00
Config.in	x86: remove grub-legacy	2012-10-07 23:01:56 +00:00
feeds.conf.default	Add xorg feed to feeds.conf.default	2011-11-16 16:05:23 +00:00
LICENSE	finally move buildroot-ng to trunk	2016-03-20 17:29:15 +01:00
Makefile	build: rework the package/install step - collect package install lists during package/compile, then install all packages at once	2012-10-06 16:01:06 +00:00
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	build: rework the package/install step - collect package install lists during package/compile, then install all packages at once	2012-10-06 16:01:06 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org