mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
4514589182
This switch involved:
[1] Regeneration of config (few options went away)
[2] Regeneration of patches so they apply cleanly (different offsets)
[3] Update of .dts files because we now explicitly specify
memory regions in use as opposed to previously used offset
from 0x8000_0000
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48240
226 lines
4.9 KiB
Plaintext
226 lines
4.9 KiB
Plaintext
/*
|
|
* Support for peripherals on the AXS10x mainboard
|
|
*
|
|
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/ {
|
|
axs10x_mb {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x00000000 0xe0000000 0x10000000>;
|
|
interrupt-parent = <&mb_intc>;
|
|
|
|
clocks {
|
|
i2cclk: i2cclk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <50000000>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
apbclk: apbclk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <50000000>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
mmcclk: mmcclk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <50000000>;
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|
|
|
|
ethernet@0x18000 {
|
|
#interrupt-cells = <1>;
|
|
compatible = "snps,dwmac";
|
|
reg = < 0x18000 0x2000 >;
|
|
interrupts = < 4 >;
|
|
interrupt-names = "macirq";
|
|
phy-mode = "rgmii";
|
|
snps,pbl = < 32 >;
|
|
clocks = <&apbclk>;
|
|
clock-names = "stmmaceth";
|
|
max-speed = <100>;
|
|
};
|
|
|
|
ehci@0x40000 {
|
|
compatible = "generic-ehci";
|
|
reg = < 0x40000 0x100 >;
|
|
interrupts = < 8 >;
|
|
};
|
|
|
|
ohci@0x60000 {
|
|
compatible = "generic-ohci";
|
|
reg = < 0x60000 0x100 >;
|
|
interrupts = < 8 >;
|
|
};
|
|
|
|
/*
|
|
* According to DW Mobile Storage databook it is required
|
|
* to use "Hold Register" if card is enumerated in SDR12 or
|
|
* SDR25 modes.
|
|
*
|
|
* Utilization of "Hold Register" is already implemented via
|
|
* dw_mci_pltfm_prepare_command() which in its turn gets
|
|
* used through dw_mci_drv_data->prepare_command call-back.
|
|
* This call-back is used in Altera Socfpga platform and so
|
|
* we may reuse it saying that we're compatible with their
|
|
* "altr,socfpga-dw-mshc".
|
|
*
|
|
* Most probably "Hold Register" utilization is platform-
|
|
* independent requirement which means that single unified
|
|
* "snps,dw-mshc" should be enough for all users of DW MMC once
|
|
* dw_mci_pltfm_prepare_command() is used in generic platform
|
|
* code.
|
|
*/
|
|
mmc@0x15000 {
|
|
compatible = "altr,socfpga-dw-mshc";
|
|
reg = < 0x15000 0x400 >;
|
|
num-slots = < 1 >;
|
|
fifo-depth = < 16 >;
|
|
card-detect-delay = < 200 >;
|
|
clocks = <&apbclk>, <&mmcclk>;
|
|
clock-names = "biu", "ciu";
|
|
interrupts = < 7 >;
|
|
bus-width = < 4 >;
|
|
};
|
|
|
|
uart@0x20000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x20000 0x100>;
|
|
clock-frequency = <33333333>;
|
|
interrupts = <17>;
|
|
baud = <115200>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
};
|
|
|
|
uart@0x21000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x21000 0x100>;
|
|
clock-frequency = <33333333>;
|
|
interrupts = <18>;
|
|
baud = <115200>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
};
|
|
|
|
/* UART muxed with USB data port (ttyS3) */
|
|
uart@0x22000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x22000 0x100>;
|
|
clock-frequency = <33333333>;
|
|
interrupts = <19>;
|
|
baud = <115200>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
};
|
|
|
|
i2c@0x1d000 {
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0x1d000 0x100>;
|
|
clock-frequency = <400000>;
|
|
clocks = <&i2cclk>;
|
|
interrupts = <14>;
|
|
};
|
|
|
|
i2c@0x1e000 {
|
|
compatible = "snps,designware-i2c";
|
|
reg = <0x1e000 0x100>;
|
|
clock-frequency = <400000>;
|
|
clocks = <&i2cclk>;
|
|
interrupts = <15>;
|
|
};
|
|
|
|
i2c@0x1f000 {
|
|
compatible = "snps,designware-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x1f000 0x100>;
|
|
clock-frequency = <400000>;
|
|
clocks = <&i2cclk>;
|
|
interrupts = <16>;
|
|
|
|
eeprom@0x54{
|
|
compatible = "24c01";
|
|
reg = <0x54>;
|
|
pagesize = <0x8>;
|
|
};
|
|
|
|
eeprom@0x57{
|
|
compatible = "24c04";
|
|
reg = <0x57>;
|
|
pagesize = <0x8>;
|
|
};
|
|
};
|
|
|
|
gpio0:gpio@13000 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x13000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gpio0_banka: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <32>;
|
|
reg = <0>;
|
|
};
|
|
|
|
gpio0_bankb: gpio-controller@1 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <8>;
|
|
reg = <1>;
|
|
};
|
|
|
|
gpio0_bankc: gpio-controller@2 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <8>;
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
gpio1:gpio@14000 {
|
|
compatible = "snps,dw-apb-gpio";
|
|
reg = <0x14000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
gpio1_banka: gpio-controller@0 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <30>;
|
|
reg = <0>;
|
|
};
|
|
|
|
gpio1_bankb: gpio-controller@1 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <10>;
|
|
reg = <1>;
|
|
};
|
|
|
|
gpio1_bankc: gpio-controller@2 {
|
|
compatible = "snps,dw-apb-gpio-port";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
snps,nr-gpios = <8>;
|
|
reg = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|