mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
ae79c41286
This router is similar to the C2600. Ethernet on WAN + LAN, switch, sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem and the POTS/DECT interface are not supported yet. It is not possible to flash LEDE via the TP-Link webinterface. The image need to be signed. The first 0x200 bytes of the image is the TP-Link header including the signature. The signature is not validated by the bootloader. The LEDE image is zeroed in this area. To install LEDE it is necessary to solder a four pin header to JP2. Connect a serial interface to this header and interrupt the autostart of kernel. Transfer the sysupgrade image via TFTP and write it to the serial flash at 0x320000. Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>
80 lines
1.3 KiB
Bash
80 lines
1.3 KiB
Bash
#!/bin/sh
|
|
#
|
|
# Copyright (c) 2014 The Linux Foundation. All rights reserved.
|
|
# Copyright (C) 2011 OpenWrt.org
|
|
#
|
|
|
|
IPQ806X_BOARD_NAME=
|
|
IPQ806X_MODEL=
|
|
|
|
ipq806x_board_detect() {
|
|
local machine
|
|
local name
|
|
|
|
machine=$(cat /proc/device-tree/model)
|
|
|
|
case "$machine" in
|
|
*"AP148")
|
|
name="ap148"
|
|
;;
|
|
*"C2600")
|
|
name="c2600"
|
|
;;
|
|
*"D7800")
|
|
name="d7800"
|
|
;;
|
|
*"DB149")
|
|
name="db149"
|
|
;;
|
|
*"NBG6817")
|
|
name="nbg6817"
|
|
;;
|
|
*"R7500")
|
|
name="r7500"
|
|
;;
|
|
*"R7500v2")
|
|
name="r7500v2"
|
|
;;
|
|
*"Linksys EA8500"*)
|
|
name="ea8500"
|
|
;;
|
|
*"R7800")
|
|
name="r7800"
|
|
;;
|
|
*"VR2600v")
|
|
name="vr2600v"
|
|
;;
|
|
esac
|
|
|
|
[ -z "$name" ] && name="unknown"
|
|
|
|
[ -z "$IPQ806X_BOARD_NAME" ] && IPQ806X_BOARD_NAME="$name"
|
|
[ -z "$IPQ806X_MODEL" ] && IPQ806X_MODEL="$machine"
|
|
|
|
[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
|
|
|
|
echo "$IPQ806X_BOARD_NAME" > /tmp/sysinfo/board_name
|
|
echo "$IPQ806X_MODEL" > /tmp/sysinfo/model
|
|
}
|
|
|
|
ipq806x_board_name() {
|
|
local name
|
|
|
|
[ -f /tmp/sysinfo/board_name ] && name=$(cat /tmp/sysinfo/board_name)
|
|
[ -z "$name" ] && name="unknown"
|
|
|
|
echo "$name"
|
|
}
|
|
|
|
ipq806x_get_dt_led() {
|
|
local label
|
|
local ledpath
|
|
local basepath="/sys/firmware/devicetree/base"
|
|
local nodepath="$basepath/aliases/led-$1"
|
|
|
|
[ -f "$nodepath" ] && ledpath=$(cat "$nodepath")
|
|
[ -n "$ledpath" ] && label=$(cat "$basepath$ledpath/label")
|
|
|
|
echo "$label"
|
|
}
|