openwrt/target/linux/mvebu/patches-3.18/061-cpuidle-mvebu-Update-cpuidle-thresholds-for-Armada-X.patch
2015-04-07 18:13:51 +00:00

67 lines
2.5 KiB
Diff

From ce6031c89a35cffd5a5992b08377b77f49a004b9 Mon Sep 17 00:00:00 2001
From: Sebastien Rannou <mxs@sbrk.org>
Date: Fri, 13 Feb 2015 15:55:03 +0100
Subject: [PATCH] cpuidle: mvebu: Update cpuidle thresholds for Armada XP SOCs
Originally, the thresholds used in the cpuidle driver for Armada SOCs
were temporarily chosen, leaving room for improvements.
This commit updates the thresholds for the Armada XP SOCs with values
that positively impact performances:
without patch with patch vendor kernel
- iperf localhost (gbit/sec) ~3.7 ~6.4 ~5.4
- ioping tmpfs (iops) ~163k ~206k ~179k
- ioping tmpfs (mib/s) ~636 ~805 ~699
The idle power consumption is negatively impacted (proportionally less
than the performance gain), and we are still performing better than
the vendor kernel here:
without patch with patch vendor kernel
- power consumption idle (W) ~2.4 ~3.2 ~4.4
- power consumption busy (W) ~8.6 ~8.3 ~8.6
There is still room for improvement regarding the value of these
thresholds, they were chosen to mimic the vendor kernel.
This patch only impacts Armada XP SOCs and was tested on Online Labs
C1 boards. A similar approach can be taken to improve the performances
of the Armada 370 and Armada 38x SOCs.
Thanks a lot to Thomas Petazzoni, Gregory Clement and Willy Tarreau
for the discussions and tips around this topic.
Signed-off-by: Sebastien Rannou <mxs@sbrk.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
drivers/cpuidle/cpuidle-mvebu-v7.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/drivers/cpuidle/cpuidle-mvebu-v7.c
+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
@@ -50,18 +50,18 @@ static struct cpuidle_driver armadaxp_id
.states[0] = ARM_CPUIDLE_WFI_STATE,
.states[1] = {
.enter = mvebu_v7_enter_idle,
- .exit_latency = 10,
+ .exit_latency = 100,
.power_usage = 50,
- .target_residency = 100,
+ .target_residency = 1000,
.flags = CPUIDLE_FLAG_TIME_VALID,
.name = "MV CPU IDLE",
.desc = "CPU power down",
},
.states[2] = {
.enter = mvebu_v7_enter_idle,
- .exit_latency = 100,
+ .exit_latency = 1000,
.power_usage = 5,
- .target_residency = 1000,
+ .target_residency = 10000,
.flags = CPUIDLE_FLAG_TIME_VALID |
MVEBU_V7_FLAG_DEEP_IDLE,
.name = "MV CPU DEEP IDLE",