mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-04 04:54:18 +00:00
6b32a5d768
NRadio C8-668GL is a Wi-Fi 6 5G cellular router based on MediaTek MT7981B SoC. - **SoC**: MediaTek MT7981B (2x Cortex-A53, 1.3GHz) - **RAM**: Nanya NT5AD512M16C4-JR 1GB DDR4 - **Flash**: ESMT FC51L08SFY3A 8GB eMMC - **Ethernet**: - 1x 2.5GbE (via GMAC0 and GPY211 PHY, shared with MT7531AE) - 3x 10/100/1000 Mbps (via MT7531AE, connected to GMAC0) - 5G Modem: GMAC1 (via GPY211 PHY - RTL8125BG - RM520N-GL) - **Wi-Fi**: MediaTek MT7976CN (2.4GHz/5GHz, 802.11ax, 2x2 MIMO, AX3000) - **Buttons**: Reset, WPS - **LEDs**: Power, 5G, 4G, WiFi - **SIM Slot**: 1x Nano SIM - **5G Modem**: Quectel RM520N-GL (Snapdragon™ X62) - **Power**: 12V/2A DC, 5.5×2.1 connector The MAC addresses are derived from the `fac_mac` field in the `bdinfo` partition, formatted as `fac_mac = HWMAC`. The allocation is as follows: | Vendor | OpenWrt Interface | Address | Notes | |---------|-------------------|---------------|------------------------------------------------| | LAN | br-lan | Label MAC | Default | | WAN | lan4 | Label MAC+1 | Only when lan4 is switched to WAN | | 2.4GHz | phy0-ap0 | Label MAC | | | 5GHz | phy1-ap0 | Label MAC | (Local Admin bit set) | | Modem | eth1 | Label MAC+2 | | 1. Log in to the router via `http://192.168.66.1`/. 2. Upgrade the official firmware to dual-system mode. 3. Select **Burn second system** and upload the `sysupgrade.bin` image. - Download the image from the OpenWrt build system or build it yourself using the OpenWrt buildroot. 4. Wait for 30 seconds and click **Switch system**. 5. The device will reboot and switch to OpenWrt. Set the U-Boot environment variable `boot_system=0` and reboot: ```bash fw_setenv boot_system 0 ``` Power off the router, hold the **WPS button**, and power it back on. 1. Rename the stock firmware file to **`recovery.bin`**. 2. Set your PC's Ethernet IP to **192.168.1.88** and connect it to the lan1 port on the router. 3. Run a TFTP server and place the `recovery.bin` file in its root directory. 4. Power off the router, press and hold the **Reset button**, and power it back on. 5. Release the Reset button when the TFTP server shows activity. 6. Wait for the router to flash the firmware and reboot automatically. - By default, `lan4` is part of `br-lan` and uses the label MAC address. - To query the RM520N-GL module, use the following command: ```bash cat /dev/ttyUSB2 & printf 'ATI\r\n' > /dev/ttyUSB2 ``` Signed-off-by: Yaoguang Bai <0xdeadc0de@badguys.club> Link: https://github.com/openwrt/openwrt/pull/17093 Signed-off-by: John Crispin <john@phrozen.org>
149 lines
3.7 KiB
Plaintext
149 lines
3.7 KiB
Plaintext
#
|
|
# Copyright (C) 2021 OpenWrt.org
|
|
#
|
|
|
|
[ -e /etc/config/ubootenv ] && exit 0
|
|
|
|
touch /etc/config/ubootenv
|
|
|
|
. /lib/uboot-envtools.sh
|
|
. /lib/functions.sh
|
|
|
|
board=$(board_name)
|
|
|
|
ubootenv_add_mmc_default() {
|
|
local envdev="$(find_mmc_part "ubootenv" "${1:-mmcblk0}")"
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x40000" "0x40000" "1"
|
|
ubootenv_add_uci_config "$envdev" "0x40000" "0x40000" "0x40000" "1"
|
|
}
|
|
|
|
ubootenv_add_nor_default() {
|
|
local envdev="/dev/mtd$(find_mtd_index "u-boot-env")"
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
|
|
ubootenv_add_uci_config "$envdev" "0x20000" "0x20000" "0x20000" "1"
|
|
}
|
|
|
|
ubootenv_add_ubi_default() {
|
|
. /lib/upgrade/nand.sh
|
|
local envubi=$(nand_find_ubi ubi)
|
|
local envdev=/dev/$(nand_find_volume $envubi ubootenv)
|
|
local envdev2=/dev/$(nand_find_volume $envubi ubootenv2)
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x1f000" "0x1f000" "1"
|
|
ubootenv_add_uci_config "$envdev2" "0x0" "0x1f000" "0x1f000" "1"
|
|
}
|
|
|
|
case "$board" in
|
|
abt,asr3000|\
|
|
h3c,magic-nx30-pro|\
|
|
jcg,q30-pro|\
|
|
mercusys,mr90x-v1-ubi|\
|
|
netcore,n60|\
|
|
nokia,ea0326gmp|\
|
|
qihoo,360t7|\
|
|
routerich,ax3000-ubootmod|\
|
|
tplink,tl-xdr4288|\
|
|
tplink,tl-xdr6086|\
|
|
tplink,tl-xdr6088|\
|
|
tplink,tl-xtr8488|\
|
|
xiaomi,mi-router-ax3000t-ubootmod|\
|
|
xiaomi,mi-router-wr30u-ubootmod|\
|
|
xiaomi,redmi-router-ax6000-ubootmod|\
|
|
zyxel,ex5601-t0-ubootmod)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
acer,predator-w6|\
|
|
acer,predator-w6d|\
|
|
acer,vero-w6m|\
|
|
glinet,gl-mt2500|\
|
|
glinet,gl-mt6000|\
|
|
glinet,gl-x3000|\
|
|
glinet,gl-xe3000|\
|
|
nradio,c8-668gl)
|
|
local envdev=$(find_mmc_part "u-boot-env")
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x80000"
|
|
;;
|
|
asus,rt-ax59u)
|
|
ubootenv_add_uci_config "/dev/mtd0" "0x100000" "0x20000" "0x20000"
|
|
;;
|
|
bananapi,bpi-r3|\
|
|
bananapi,bpi-r3-mini|\
|
|
bananapi,bpi-r4|\
|
|
bananapi,bpi-r4-poe|\
|
|
cmcc,rax3000m|\
|
|
jdcloud,re-cp-03)
|
|
. /lib/upgrade/fit.sh
|
|
export_fitblk_bootdev
|
|
case "$CI_METHOD" in
|
|
ubi)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
emmc)
|
|
bootdev=${EMMC_KERN_DEV%%p[0-9]*}
|
|
ubootenv_add_mmc_default "${bootdev#/dev/}"
|
|
;;
|
|
default)
|
|
ubootenv_add_nor_default
|
|
;;
|
|
esac
|
|
;;
|
|
comfast,cf-e393ax)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x80000"
|
|
;;
|
|
cetron,ct3003|\
|
|
edgecore,eap111|\
|
|
netgear,wax220|\
|
|
zbtlink,zbt-z8102ax|\
|
|
zbtlink,zbt-z8103ax)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
|
|
;;
|
|
dlink,aquila-pro-ai-m30-a1)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
|
|
;;
|
|
gatonetworks,gdsp)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x10000"
|
|
;;
|
|
glinet,gl-mt3000)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000"
|
|
;;
|
|
mercusys,mr90x-v1|\
|
|
routerich,ax3000|\
|
|
tplink,re6000xd)
|
|
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x20000" "1"
|
|
;;
|
|
openembed,som7981)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x80000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd3" "0x0" "0x100000" "0x100000"
|
|
;;
|
|
openwrt,one)
|
|
ubootenv_add_ubi_default
|
|
;;
|
|
smartrg,sdg-8733|\
|
|
smartrg,sdg-8733a|\
|
|
smartrg,sdg-8734)
|
|
local envdev=$(find_mmc_part "u-boot-env" "mmcblk0")
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x8000" "0x8000"
|
|
;;
|
|
ubnt,unifi-6-plus)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x10000"
|
|
;;
|
|
xiaomi,mi-router-ax3000t|\
|
|
xiaomi,mi-router-wr30u-stock|\
|
|
xiaomi,redmi-router-ax6000-stock)
|
|
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000"
|
|
ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000"
|
|
;;
|
|
zyxel,ex5601-t0)
|
|
local envdev=/dev/mtd$(find_mtd_index "u-boot-env")
|
|
ubootenv_add_uci_config "$envdev" "0x0" "0x20000" "0x40000" "2"
|
|
;;
|
|
zyxel,ex5700-telenor)
|
|
ubootenv_add_uci_config "/dev/ubootenv" "0x0" "0x4000" "0x4000" "1"
|
|
;;
|
|
esac
|
|
|
|
config_load ubootenv
|
|
config_foreach ubootenv_add_app_config
|
|
|
|
exit 0
|