openwrt/target/linux/ar71xx/image/nand.mk
Mantas Pucka 68b5d34f69 ar71xx: add support for 8devices Rambutan development board
Rambutan is a Wifi module based on QCA9550/9557
http://www.8devices.com/products/rambutan

This commit adds basic support for Rambutan development kit

Specification:
- 720/600/200 MHz (CPU/DDR/AHB)
- 128 MB of DDR2 RAM
- 128 MB of NAND Flash
- 1x 100Mbps Ethernet
- 1x 1000Mbps Ethernet (PHY on dev-kit)
- 1x Wifi radio 2x2 MIMO, dualband 2.4 and 5 GHz
- 2x U.FL connectors on module, chip antennas on dev-kit
- 1x miniPCIe slot
- 1x USB2.0 host socket + 1x USB2.0 pins on 2.54mm header

Flash instructions:
Stock firmware is OpenWrt, so use:
 sysupgrade -n /tmp/lede-ar71xx-nand-rambutan-squashfs-sysupgrade.tar
or upgarde from GUI (don't save config)
Use factory image to flash from U-Boot:
 tftpboot 80060000 lede-ar71xx-nand-rambutan-squashfs-factory.ubi
 nand erase.part ubi
 nand write 80060000 ubi ${filesize}

Signed-off-by: Mantas Pucka <mantas@8devices.com>
[split support in uboot-envtools package into a separate commit,
fixed alphabetical order in lib/preinit/05_set_iface_mac_ar71xx]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:43:33 +02:00

106 lines
3.3 KiB
Makefile

define Device/c-60
DEVICE_TITLE := AirTight C-60
DEVICE_PACKAGES := kmod-spi-gpio kmod-usb-core kmod-usb2 kmod-ath9k
BOARDNAME = C-60
BLOCKSIZE := 64k
KERNEL_SIZE = 3648k
IMAGE_SIZE = 32m
IMAGES := sysupgrade.tar
MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,3648k(kernel),64k(art)ro;ar934x-nfc:32m(ubi)
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
IMAGE/sysupgrade.tar := sysupgrade-tar
endef
TARGET_DEVICES += c-60
define Device/domywifi-dw33d
DEVICE_TITLE := DomyWifi DW33D
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME = DW33D
IMAGE_SIZE = 16000k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware);ar934x-nfc:96m(rootfs_data),32m(backup)ro
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | pad-to 14528k | append-kernel | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += domywifi-dw33d
define Build/MerakiNAND
-$(STAGING_DIR_HOST)/bin/mkmerakifw \
-B $(BOARDNAME) -s \
-i $@ \
-o $@.new
@mv $@.new $@
endef
define Device/mr18
DEVICE_TITLE := Meraki MR18
DEVICE_PACKAGES := kmod-spi-gpio kmod-ath9k
BOARDNAME = MR18
BLOCKSIZE := 64k
MTDPARTS = ar934x-nfc:512k(nandloader)ro,8M(kernel),8M(recovery),113664k(ubi),128k@130944k(odm-caldata)ro
IMAGES := sysupgrade.tar
KERNEL := kernel-bin | patch-cmdline | MerakiNAND
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND
IMAGE/sysupgrade.tar := sysupgrade-tar
endef
TARGET_DEVICES += mr18
define Build/MerakiNAND-old
-$(STAGING_DIR_HOST)/bin/mkmerakifw-old \
-B $(BOARDNAME) -s \
-i $@ \
-o $@.new
@mv $@.new $@
endef
define Device/rambutan
DEVICE_TITLE := 8devices Rambutan
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME = RAMBUTAN
BLOCKSIZE = 128KiB
MTDPARTS = ar934x-nfc:3M(u-boot)ro,2M(u-boot-env),1M(art),122M(ubi)
PAGESIZE := 2048
KERNEL_IN_UBI := 1
IMAGES := factory.ubi sysupgrade.tar
IMAGE/sysupgrade.tar := sysupgrade-tar
IMAGE/factory.ubi := append-ubi
endef
TARGET_DEVICES += rambutan
define Device/z1
DEVICE_TITLE := Meraki Z1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-spi-gpio kmod-ath9k kmod-owl-loader
BOARDNAME = Z1
BLOCKSIZE := 64k
MTDPARTS = ar934x-nfc:128K(loader1)ro,8064K(kernel),128K(loader2)ro,8064K(recovery),114560K(ubi),128K(origcaldata)ro
IMAGES := sysupgrade.tar
KERNEL := kernel-bin | patch-cmdline | MerakiNAND-old
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND-old
IMAGE/sysupgrade.tar := sysupgrade-tar
endef
TARGET_DEVICES += z1
define LegacyDevice/R6100
DEVICE_TITLE := NETGEAR R6100
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
endef
LEGACY_DEVICES += R6100
define LegacyDevice/WNDR3700V4
DEVICE_TITLE := NETGEAR WNDR3700v4
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
endef
LEGACY_DEVICES += WNDR3700V4
define LegacyDevice/WNDR4300V1
DEVICE_TITLE := NETGEAR WNDR4300v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport
endef
LEGACY_DEVICES += WNDR4300V1
define LegacyDevice/NBG6716
DEVICE_TITLE := Zyxel NBG 6716
DEVICE_PACKAGES := kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
endef
LEGACY_DEVICES += NBG6716