mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 01:11:14 +00:00
1199a91095
Refreshed patches. The following patches were upstreamed and have been deleted: * target/linux/lantiq/patches-4.14/0025-MIPS-lantiq-gphy-Remove-reboot-remove-reset-asserts.patch * target/linux/generic/pending-4.14/101-clocksource-mips-gic-timer-fix-clocksource-counter-w.patch * target/linux/generic/pending-4.14/103-MIPS-c-r4k-fix-data-corruption-related-to-cache-coherence.patch * target/linux/generic/pending-4.14/181-net-usb-add-lte-modem-wistron-neweb-d18q1.patch Compile-tested: ramips/mt7621, x86/64 Run-tested: ramips/mt7621 Signed-off-by: Stijn Segers <foss@volatilesystems.org>
127 lines
4.0 KiB
Diff
127 lines
4.0 KiB
Diff
From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001
|
|
From: Sham Muthayyan <smuthayy@codeaurora.org>
|
|
Date: Tue, 19 Jul 2016 19:58:22 +0530
|
|
Subject: PCI: qcom: Fixed IPQ806x PCIE init changes
|
|
|
|
Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e
|
|
Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
|
|
---
|
|
drivers/pci/host/pcie-qcom.c | 62 +++++++++++++++++++++++++++++++++++++-------
|
|
1 file changed, 53 insertions(+), 9 deletions(-)
|
|
|
|
--- a/drivers/pci/dwc/pcie-qcom.c
|
|
+++ b/drivers/pci/dwc/pcie-qcom.c
|
|
@@ -52,7 +52,13 @@
|
|
#define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
|
|
|
|
#define PCIE20_PARF_PHY_CTRL 0x40
|
|
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
|
|
+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
|
|
+
|
|
#define PCIE20_PARF_PHY_REFCLK 0x4C
|
|
+#define REF_SSP_EN BIT(16)
|
|
+#define REF_USE_PAD BIT(12)
|
|
+
|
|
#define PCIE20_PARF_DBI_BASE_ADDR 0x168
|
|
#define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C
|
|
#define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
|
|
@@ -83,6 +89,18 @@
|
|
#define DBI_RO_WR_EN 1
|
|
|
|
#define PERST_DELAY_US 1000
|
|
+/* PARF registers */
|
|
+#define PCIE20_PARF_PCS_DEEMPH 0x34
|
|
+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16)
|
|
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8)
|
|
+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0)
|
|
+
|
|
+#define PCIE20_PARF_PCS_SWING 0x38
|
|
+#define PCS_SWING_TX_SWING_FULL(x) (x << 8)
|
|
+#define PCS_SWING_TX_SWING_LOW(x) (x << 0)
|
|
+
|
|
+#define PCIE20_PARF_CONFIG_BITS 0x50
|
|
+#define PHY_RX0_EQ(x) (x << 24)
|
|
|
|
#define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
|
|
#define SLV_ADDR_SPACE_SZ 0x10000000
|
|
@@ -102,6 +120,7 @@ struct qcom_pcie_resources_2_1_0 {
|
|
struct regulator *vdda;
|
|
struct regulator *vdda_phy;
|
|
struct regulator *vdda_refclk;
|
|
+ uint8_t phy_tx0_term_offset;
|
|
};
|
|
|
|
struct qcom_pcie_resources_1_0_0 {
|
|
@@ -179,6 +198,16 @@ struct qcom_pcie {
|
|
|
|
#define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
|
|
|
|
+static inline void
|
|
+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
|
|
+{
|
|
+ u32 val = readl(addr);
|
|
+
|
|
+ val &= ~clear_mask;
|
|
+ val |= set_mask;
|
|
+ writel(val, addr);
|
|
+}
|
|
+
|
|
static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
|
|
{
|
|
gpiod_set_value_cansleep(pcie->reset, 1);
|
|
@@ -280,6 +309,10 @@ static int qcom_pcie_get_resources_2_1_0
|
|
if (IS_ERR(res->ext_reset))
|
|
return PTR_ERR(res->ext_reset);
|
|
|
|
+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
|
|
+ &res->phy_tx0_term_offset))
|
|
+ res->phy_tx0_term_offset = 0;
|
|
+
|
|
res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
|
|
return PTR_ERR_OR_ZERO(res->phy_reset);
|
|
}
|
|
@@ -309,7 +342,6 @@ static int qcom_pcie_init_2_1_0(struct q
|
|
struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
|
|
struct dw_pcie *pci = pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
- u32 val;
|
|
int ret;
|
|
|
|
ret = reset_control_assert(res->ahb_reset);
|
|
@@ -378,15 +410,26 @@ static int qcom_pcie_init_2_1_0(struct q
|
|
goto err_deassert_ahb;
|
|
}
|
|
|
|
- /* enable PCIe clocks and resets */
|
|
- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
- val &= ~BIT(0);
|
|
- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
|
|
-
|
|
- /* enable external reference clock */
|
|
- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
|
|
- val |= BIT(16);
|
|
- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
|
|
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
|
|
+
|
|
+ /* Set Tx termination offset */
|
|
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
|
|
+ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
|
|
+ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
|
|
+
|
|
+ /* PARF programming */
|
|
+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
|
|
+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
|
|
+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
|
|
+ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
|
|
+ writel(PCS_SWING_TX_SWING_FULL(0x78) |
|
|
+ PCS_SWING_TX_SWING_LOW(0x78),
|
|
+ pcie->parf + PCIE20_PARF_PCS_SWING);
|
|
+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
|
|
+
|
|
+ /* Enable reference clock */
|
|
+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
|
|
+ REF_USE_PAD, REF_SSP_EN);
|
|
|
|
ret = reset_control_deassert(res->phy_reset);
|
|
if (ret) {
|